SAN 光交简单命令
SAN 光交简单命令
FC1
|
步骤 |
命令 |
|
1，新建主机别名 |
alicreate "cspower1","10:00:00:10:9b:ba:XX:XX" |
|
2，新建存储别名 |
alicreate "SAN1_L0_IOM0_P0","20:00:00:20:5b:bc:XX:XX" |
|
3，新建zone |
zonecreate "cspower1_SAN1_L0_IOM0_P0"," cspower1; SAN1_L0_IOM0_P0" |
|
4，加入zone |
cfgadd "zonecfg","cspower1_SAN1_L0_IOM0_P0" |
|
5，配置保存 |
cfgsave |
|
6，配置生效 |
cfgenable "zonecfg" |
FC2
|
步骤 |
命令 |
|
1，新建主机别名 |
alicreate "cspower1","10:00:00:10:9b:ba:XX:XX" |
|
2，新建存储别名 |
alicreate "SAN1_R0_IOM0_P0","20:00:00:20:5b:bc:XX:XX" |
|
3，新建zone |
zonecreate "cspower1_SAN1_R0_IOM0_P0"," cspower1; SAN1_R0_IOM0_P0" |
|
4，加入zone |
cfgadd "zonecfg","cspower1_SAN1_R0_IOM0_P0" |
|
5，配置保存 |
cfgsave |
|
6，配置生效 |
cfgenable "zonecfg" |
SAN光交基本命令汇总
|
步骤 |
命令 |
|
1，查看链路连接情况 |
#switchshow |
|
2，端口速率调整 |
1，查看端口对应的index（port_index ） #switchshow 2，SAN光交上将小机FC口的速率从32G调整为16G #portcfgspeed -i port_index 16 |
|
3，配置导出 |
#cfgshow |
|
4，删除别名 |
#alidelete "cspower1" |
|
5，删除zone |
#zonedelete "cspower1_SAN1_R0_IOM0_P0" |
|
6，删除zone配置 |
#cfgremove "zonecfg","cspower1_SAN1_R0_IOM0_P0" |
|
7，整条链路断开，关闭SAN光纤交换机,所有端口 |
#switchdisable |
|
8，开启SAN光纤交换机1所有端口 |
#switchenable |
|
9，查看电源模块 |
#psshow |
|
10，查看板块状态 |
#slotshow |
|
11，查看管理板 |
#hashow |
|
12，查看模块 |
#sfpshow 3/1 (3为槽位，1为端口号) |
| 13，查看端口状态 | #portshow -i 1 （-i 索引号） |
| 14，查看端口err 计数 | #porterrshow |
| 15，查看风扇状态 | #fanshow |
| 16，查看温度 | #tempshow |
| 17，修改ntp配置 |
>help tsclockserver #查看帮助 |
1 回退环境： 2 1，ssh登录SAN光交后， 3 (1)删除zone配置 4 #cfgremove "zonecfg","esxi1_fcs1_SAN1_R0_IOM0_P0" 5 (2)删除zone， 6 #zonedelete "esxi1_fcs1_SAN1_R0_IOM0_P0" 7 (3)保存 cfgsave 8 (4)生效 cfgenable "zonecfg" 9 (5) 验证 zone --validate esxi1_fcs1_SAN1_R0_IOM0_P0 10 (6)删除别名： 11 #alidelete "esxi1_fcs1"
