Dell Server Unable to Boot to Esxi Server V3.5

Follow the steps given below to enable the system to boot to the embedded ESXi hypervisor.

1. Turn on your server.
   
   
2. When the Dell Splash Screen appears, press <F2> to launch the setup menu.
   
   
3. After completion of the system boot, the system BIOS configuration menu appears.
   
   
4. Select Integrated Devices > Internal USB Port > On.
   
   
5. Press Enter, then Esc, and then Enter again to save these changes and reboot.
   
   
6. When the Dell Splash Screen appears, press <F2> to launch the setup menu.
   
   
7. Select Hard Disk as the boot sequence, then select SD Card: Multi Card. Press hyphen (-) to move the SD Card up in the order.
   
   
8. Press Enter > Esc > Enter again to save these changes.
   
   
9. Restart your server.