mdadm Centos7 软RAID0安装配置

基础程序安装

# 使用yum安装
yum -y install gdisk mdadm

检查是否安装配置过RAID

# 检查设备是否已经做过raid
mdadm -E /dev/vd{b,c}

磁盘分区

# 对磁盘分区，
gdisk /dev/vdb

# 列出分区类型 L 
# 调整分区类型 t 
# Linux RAID类型 fd00 
# 保存配置 w 
# 确认 y

?

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

gdisk /dev/vdb GPT fdisk (gdisk) version 0.8.10   Partition table scan:   MBR: not present   BSD: not present   APM: not present   GPT: not present   Creating new GPT entries.   Command (? for help): n Partition number (1-128, default 1): First sector (34-41943006, default = 2048) or {+-}size{KMGTP}: Last sector (2048-41943006, default = 41943006) or {+-}size{KMGTP}: Current type is 'Linux filesystem' Hex code or GUID (L to show codes, Enter = 8300): fd00 Changed type of partition to 'Linux RAID'   Command (? for help): w   Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!!   Do you want to proceed? (Y/N): y OK; writing new GUID partition table (GPT) to /dev/vdb. The operation has completed successfully.

?

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

gdisk /dev/vdc GPT fdisk (gdisk) version 0.8.10   Partition table scan:   MBR: not present   BSD: not present   APM: not present   GPT: not present   Creating new GPT entries.   Command (? for help): n Partition number (1-128, default 1): First sector (34-41943006, default = 2048) or {+-}size{KMGTP}: Last sector (2048-41943006, default = 41943006) or {+-}size{KMGTP}: Current type is 'Linux filesystem' Hex code or GUID (L to show codes, Enter = 8300): fd00 Changed type of partition to 'Linux RAID'   Command (? for help): w   Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!!   Do you want to proceed? (Y/N): y OK; writing new GUID partition table (GPT) to /dev/vdc. The operation has completed successfully.

　　

验证分区定义是否为RAID

# 验证是否正确定义RAID

mdadm -E /dev/vd{b,c}

 

创建RAID

# 创建RAID0

mdadm -C /dev/md0 -l raid0 -n 2 /dev/vd{b,c}

-C #创建
-l #级别
-n #RAID设备数
最后指定原始设备

?

1 2 3 4 5 6 7 8 9 10 11 12

mdadm -C /dev/md0 -l raid0 -n 2 /dev/vd{b,c} mdadm: partition table exists on /dev/vdb mdadm: partition table exists on /dev/vdb but will be lost or        meaningless after creating array mdadm: partition table exists on /dev/vdc mdadm: partition table exists on /dev/vdc but will be lost or        meaningless after creating array Continue creating array? Continue creating array? (y/n) Continue creating array? (y/n) y mdadm: Defaulting to version 1.2 metadata mdadm: array /dev/md0 started.

　　

检查RAID是否正确创建

# 查看是否创建RAID成功
cat /proc/mdstat

# 验证是否正确定义RAID
mdadm -E /dev/vd{b,c}

# 查看raid0信息
mdadm -D /dev/md0

格式化并挂载RAID

# 格式化文件系统
mkfs.xfs -f /dev/md0

# 创建挂在目录
mkdir /mnt/raid0

# 挂在raid0
mount /dev/md0 /mnt/raid0/

# 查看uuid，分区类型
blkid /dev/md0

# 添加自动挂载
vim /etc/fstab
/dev/md0                /mnt/raid0              xfs    defaults         0 0

# 检查fstab语法
mount -av

保存配置，以便停止后重新装配

# 保存RAID配置
echo DEVICE /dev/sd{b,c}1 > /etc/mdadm.conf
mdadm -Dvs >> /etc/mdadm.conf
 
mdadm -D -s -v >> /etc/mdadm.conf
mdadm --detail --scan --verbose >> /etc/mdadm.conf

cat /etc/mdadm.conf

清除raid0

#取消挂载
umount /dev/md0

# 停止raid0
mdadm -S /dev/md0

# 清除成员磁盘当中阵列的超级块信息 
mdadm --zero-superblock /dev/vd{b,c}

# 删除或注释/etc/fstab上的挂载信息
vi /etc/fstab
# /dev/md0                /mnt/raid0              xfs    defaults         0 0

重新装配

# 将已经停止的阵列重新装配
mdadm -A /dev/md0 /dev/vd{b,c}

# 自动装配，自动从/etc/mdadm.conf配置文件读取配置
mdadm -A /dev/md0