【原创】CentOS8双网卡绑定

1. NAT网络配置(所有服务器):

# yum install bash-completion

# cd /etc/sysconfig/network-scripts/

bond0配置:

# vim ifcfg-bond0

BOOTPROTO=static

NAME=bond0

DEVICE=bond0

ONBOOT=yes

BONDING_MASTER=yes

BONDING_OPTS="mode=1 miimon=100" #指定绑定类型为1及链路状态监测间隔时间

IPADDR=192.168.10.21

NETMASK=255.255.255.0

GATEWAY=192.168.10.2

DNS1=202.106.0.20

 

eth0配置:

# cat ifcfg-eth0

BOOTPROTO=static

NAME=eth0

DEVICE=eth0

ONBOOT=yes

MASTER=bond0

USERCTL=no

SLAVE=yes

 

ech1配置

# vim ifcfg-eth1

BOOTPROTO=static

NAME=eth1

DEVICE=eth1

ONBOOT=yes

MASTER=bond0

USERCTL=no

SLAVE=yes

 

2.仅主机网络配置

# cd /etc/sysconfig/network-scripts/

Bond1配置:

# vim ifcfg-bond1

BOOTPROTO=static

NAME=bond1

DEVICE=bond1

ONBOOT=yes

BONDING_MASTER=yes

BONDING_OPTS="mode=1 miimon=100" #指定绑定类型为1及链路状态监测间隔时间

IPADDR=192.168.20.21

NETMASK=255.255.255.0

 

eth2配置:

# vim ifcfg-eth2

BOOTPROTO=static

NAME=eth2

DEVICE=eth2

ONBOOT=yes

MASTER=bond1

USERCTL=no

SLAVE=yes

 

eth3配置:

# vim ifcfg-eth3

BOOTPROTO=static

NAME=eth3

DEVICE=eth3

ONBOOT=yes

MASTER=bond1

USERCTL=no

SLAVE=yes

 

3.查看网卡状态:

nmcli c reload

nmcli c up ethX

# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bond0 state UP group default qlen 1000
link/ether 00:0c:29:9d:a6:a6 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bond0 state UP group default qlen 1000
link/ether 00:0c:29:9d:a6:a6 brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bond1 state UP group default qlen 1000
link/ether 00:0c:29:9d:a6:ba brd ff:ff:ff:ff:ff:ff
5: eth3: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bond1 state UP group default qlen 1000
link/ether 00:0c:29:9d:a6:ba brd ff:ff:ff:ff:ff:ff
6: bond1: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:0c:29:9d:a6:ba brd ff:ff:ff:ff:ff:ff
inet 192.168.20.50/24 brd 192.168.20.255 scope global noprefixroute bond1
valid_lft forever preferred_lft forever
7: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:0c:29:9d:a6:a6 brd ff:ff:ff:ff:ff:ff
inet 192.168.10.50/24 brd 192.168.10.255 scope global noprefixroute bond0
valid_lft forever preferred_lft forever

 

 

4.内外网通信:

# ping www.baidu.com

 

# ping 192.168.20.2

 

6.更新yum云:

# yum install wget  –y

# rm -rf /etc/yum.repos.d/*

# wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo

# yum install –y centos-release-openstack-ocata.noarch

# yum install -y https://rdoproject.org/repos/rdo-release.rpm

# yum clean all

# yum makecache

 

主:更新阿里云openstack-ocata源,需更改rdo.repo, openstack-ocata.repo中的源为:

http://mirrors.aliyun.com/centos/7/cloud/x86_64/openstack-ocata/

http://mirrors.aliyun.com/centos/7/cloud/x86_64/openstack-queens/

 

7.查看yum源版本:

yum list centos-release-openstack*

 

8.安装常用命令

# yum install -y net-tools vim lrzsz tree screen lsof ntpdate telnet wget

posted @ 2020-01-30 15:01  shuyang  阅读(4464)  评论(0编辑  收藏  举报