centos7 安装 docker calico
原文链接:https://www.cnblogs.com/lkun/p/7857453.html
参考链接(etcd搭建):https://blog.csdn.net/jiangshouzhuang/article/details/52822125
etcd 搭建:
node1:
nohup etcd --name node1 --initial-advertise-peer-urls http://192.168.100.107:2380 \ --listen-peer-urls http://0.0.0.0:2380 --listen-client-urls http://0.0.0.0:2379,http://0.0.0.0:4001 \ --advertise-client-urls http://0.0.0.0:2379 --initial-cluster-token etcd-cluster \ --initial-cluster node1=http://192.168.100.107:2380,node2=http://192.168.100.108:2380 --initial-cluster-state new &> etcd.log&
node2:
nohup etcd --name node2 --initial-advertise-peer-urls http://192.168.100.108:2380 \ --listen-peer-urls http://0.0.0.0:2380 --listen-client-urls http://0.0.0.0:2379,http://0.0.0.0:4001 \ --advertise-client-urls http://0.0.0.0:2379 --initial-cluster-token etcd-cluster \ --initial-cluster node1=http://192.168.100.107:2380,node2=http://192.168.100.108:2380 --initial-cluster-state new &> etcd.log&
检查etcd:
[root@node2 ~]# etcdctl -C http://192.168.100.107:2379,http://192.168.100.108:2379 member list 46ed1796ef158c6f: name=node1 peerURLs=http://192.168.100.107:2380 clientURLs=http://0.0.0.0:2379 isLeader=true 57bd6fb5424e9607: name=node2 peerURLs=http://192.168.100.108:2380 clientURLs=http://0.0.0.0:2379 isLeader=false
docker 配置:
node1配置:
[root@node1 ~]# cat /etc/sysconfig/docker OPTIONS='--cluster-store=etcd://192.168.100.107:2379 --log-driver=journald --signature-verification=false'
node2配置:
[root@node2 ~]# cat /etc/sysconfig/docker OPTIONS='--cluster-store=etcd://192.168.100.108:2379 --log-driver=journald --signature-verification=false'
calico-node容器启动:docker pull quay.io/calico/node:v2.6.2
docker run --net=host --privileged --name=calico-node -d --restart=always -e NODENAME=node1 -e CALICO_NETWORKING_BACKEND=bird -e CALICO_LIBNETWORK_ENABLED=true -e ETCD_ENDPOINTS=http://node1:2379 -v /var/log/calico:/var/log/calico -v /var/run/calico:/var/run/calico -v /lib/modules:/lib/modules -v /run:/run -v /run/docker/plugins:/run/docker/plugins -v /var/run/docker.sock:/var/run/docker.sock quay.io/calico/node:v2.6.2
检查:
[root@node1 ~]# calicoctl node status Calico process is running. IPv4 BGP status +-----------------+-------------------+-------+----------+-------------+ | PEER ADDRESS | PEER TYPE | STATE | SINCE | INFO | +-----------------+-------------------+-------+----------+-------------+ | 192.168.100.108 | node-to-node mesh | up | 02:50:57 | Established | +-----------------+-------------------+-------+----------+-------------+ IPv6 BGP status No IPv6 peers found.
创建calico网络
[root@node1 ~]# docker network create --driver calico --ipam-driver calico-ipam calico-net1
922e39e3990d199e07365ffe3b7f3d4c4b8365fda8ab89810863473251235819
这时node1和node2都可以看到此网络:
[root@node1 ~]# docker network ls NETWORK ID NAME DRIVER SCOPE 82bef7a1eabd bridge bridge local 5ec88055b6f3 calico-net1 calico global 33f0f6170f24 host host local cf2ae938e7f0 none null local [root@node2 ~]# docker network ls NETWORK ID NAME DRIVER SCOPE f95a0c79fe4c bridge bridge local 5ec88055b6f3 calico-net1 calico global fac2d56a2487 host host local 0cc71e06f4e6 none null local
启动容器,测试网络:
node1:
docker run -itd --name calico1 --network=calico-net1 centos sleep inf
node2:
docker run -itd --name calico2 --network=calico-net1 centos sleep inf
容器网络查看:
node1:
[root@node1 ~]# docker exec calico1 ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 8: cali0@if9: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default link/ether ee:ee:ee:ee:ee:ee brd ff:ff:ff:ff:ff:ff link-netnsid 0 inet 192.168.166.128/32 scope global cali0 valid_lft forever preferred_lft forever inet6 fe80::ecee:eeff:feee:eeee/64 scope link valid_lft forever preferred_lft forever
node2:
[root@node2 ~]# docker exec calico3 ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 7: cali0@if8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default link/ether ee:ee:ee:ee:ee:ee brd ff:ff:ff:ff:ff:ff link-netnsid 0 inet 192.168.104.1/32 scope global cali0 valid_lft forever preferred_lft forever inet6 fe80::ecee:eeff:feee:eeee/64 scope link valid_lft forever preferred_lft forever
容器网络测试:
[root@node2 ~]# docker exec calico3 ping 192.168.166.128 PING 192.168.166.128 (192.168.166.128) 56(84) bytes of data. 64 bytes from 192.168.166.128: icmp_seq=1 ttl=62 time=0.475 ms 64 bytes from 192.168.166.128: icmp_seq=2 ttl=62 time=0.481 ms