Workstation 可成功安装ESX但发现不到本地存储的解决方法


近日尝试用Dell desktop 搭建临时学习环境， 因CPU不支持64位和虚拟化，所以采用的是ESX 3.5方案。通过对Dell 商用台式机的测试，例如280, 520, 330等多种型号，发现Dell OptiPlex 330能成功安装并能启动，但在Virtual Center里无法发现存储，后来发现原来与BIOS中的硬盘设置有关，将RAID Autodetect / ATA 转为 RAID Autodetect / AHCI, 本地存储就可以认出来了。 经测试，Dell OptiPlex 330 能在ESX中完全识别而且安装后能成功启动。

clip_image002


以下是BIOS中的修改步骤。

Change the SATA Operation Setting From RAID Autodetect / ATA to RAID Autodetect / AHCI in System Setup

1. Restart the computer.

2. Press <F2> immediately after the keyboard LEDs flash to enter the BIOS (System Setup).

3. In the System Setup screen, press <Up Arrow> or <Down Arrow> to highlight the Drives section, and then press <Enter>.

4. Press the <Up Arrow> or <Down Arrow> to highlight the SATA Operation section, and then press <Enter>.

5. Press the <Up Arrow> or <Down Arrow> to highlight RAID Autodetect / AHCI, and then press <Enter>.

6. Press <Esc> to exit the System Setup.

7. Press <Up Arrow> or <Down Arrow> to highlight Save/Exit, and then press <Enter>. The computer restarts.
 
posted @ 2010-01-17 21:16  vmware  阅读(932)  评论(0)    收藏  举报