metasploit
msf > use scanner/portscan/syn msf auxiliary(syn) > set RHOSTS 192.168.0.101 RHOSTS => 192.168.0.101 msf auxiliary(syn) > set THREADS 50 THREADS => 50 msf auxiliary(syn) > run [-] Auxiliary failed: RuntimeError eth0: no IPv4 address assigned [-] Call stack: [-] /opt/metasploit-4.4.0/msf3/lib/msf/core/exploit/capture.rb:113:in `setfilter' [-] /opt/metasploit-4.4.0/msf3/lib/msf/core/exploit/capture.rb:113:in `open_pcap' [-] /opt/metasploit-4.4.0/msf3/modules/auxiliary/scanner/portscan/syn.rb:51:in `run_batch' [-] /opt/metasploit-4.4.0/msf3/lib/msf/core/auxiliary/scanner.rb:164:in `block in run' [-] /opt/metasploit-4.4.0/msf3/lib/msf/core/thread_manager.rb:100:in `call' [-] /opt/metasploit-4.4.0/msf3/lib/msf/core/thread_manager.rb:100:in `block in spawn' [*] Auxiliary module execution completed
refer to document: http://seclists.org/metasploit/2010/q3/359
msf auxiliary(syn) > show options Module options (auxiliary/scanner/portscan/syn): Name Current Setting Required Description ---- --------------- -------- ----------- BATCHSIZE 256 yes The number of hosts to scan per set INTERFACE no The name of the interface PORTS 1-10000 yes Ports to scan (e.g. 22-25,80,110-900) RHOSTS 192.168.0.101 yes The target address range or CIDR identifier SNAPLEN 65535 yes The number of bytes to capture THREADS 50 yes The number of concurrent threads TIMEOUT 500 yes The reply read timeout in milliseconds msf auxiliary(syn) > set INTERFACE wlan0 INTERFACE => wlan0 msf auxiliary(syn) > run [*] TCP OPEN 192.168.0.101:135 [*] TCP OPEN 192.168.0.101:139 [*] TCP OPEN 192.168.0.101:445 [*] TCP OPEN 192.168.0.101:1025 [*] TCP OPEN 192.168.0.101:1026 [*] TCP OPEN 192.168.0.101:1029 [*] TCP OPEN 192.168.0.101:1030 [*] TCP OPEN 192.168.0.101:1032 [*] TCP OPEN 192.168.0.101:1035 [*] TCP OPEN 192.168.0.101:1036 [*] TCP OPEN 192.168.0.101:3306 [*] TCP OPEN 192.168.0.101:5357 [*] Scanned 1 of 1 hosts (100% complete) [*] Auxiliary module execution completed
