Virtual Box设置仅主机模式

一、硬件

1.为虚拟机添加网卡

2.配置网卡

二、软件

3.获取mac地址

命令：ip link

[root@vbox network-scripts]# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
    link/ether 08:00:27:9a:97:5e brd ff:ff:ff:ff:ff:ff
3: enp0s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
    link/ether 08:00:27:19:ba:4d brd ff:ff:ff:ff:ff:ff

4.获取UUID

命令：nmcli con

[root@vbox network-scripts]# nmcli con
NAME    UUID                                  TYPE      DEVICE 
enp0s3  40193217-26b5-4246-94f8-13449410d506  ethernet  enp0s3 
enp0s8  fa9dd332-b1ff-3f86-ab1e-fa7c028d20b6  ethernet  enp0s8

5.修改配置文件

命令：cd /etc/sysconfig/network-scripts
命令：cp ifcfg-enp0s3 ifcfg-enp0s8

ifcfg-enp0s3                                              ifcfg-enp0s8

TYPE=Ethernet                                             TYPE=Ethernet
PROXY_METHOD=none                                         PROXY_METHOD=none
BROWSER_ONLY=no                                           BROWSER_ONLY=no
BOOTPROTO=dhcp                                            BOOTPROTO=static
DEFROUTE=yes                                              DEFROUTE=yes
IPV4_FAILURE_FATAL=no                                     IPV4_FAILURE_FATAL=no  
IPV6INIT=yes                                              IPV6INIT=yes
IPV6_AUTOCONF=yes                                         IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes                                         IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no                                     IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy                         IPV6_ADDR_GEN_MODE=stable-privacy
NAME=enp0s3                                               NAME=enp0s8
UUID=40193217-26b5-4246-94f8-13449410d506                 UUID=fa9dd332-b1ff-3f86-ab1e-fa7c028d20b6
DEVICE=enp0s3                                             DEVICE=enp0s8
ONBOOT=yes                                                ONBOOT=yes
                                                          HWADDR=08:00:27:19:ba:4d

                                                          IPADDR=192.168.42.10
                                                          NETMASK=255.255.255.0

6.重启网卡

命令：systemctl restart network