利用local nginx搭建k8s-1.17.4高可用kubernetes集群
之前看大佬的开源项目2.0版本,https://github.com/easzlab/kubeasz
发现已经去掉了keepalived,已无需依赖外部负载均衡实现apiserver的高可用,原理和用local nginx差不多,一直想尝试下这种搭建方法,今天终于如愿了,记录下
1. 简介
利用local nginx方式实现Kubernetes 1.17.4高可用搭建
2. 服务器版本和架构信息
系统版本:CentOS Linux release 7.7.1908 (Core)
内核:4.18.12-1.el7.elrepo.x86_64
Kubernetes: v1.17.4 #目前最新稳定版本
Docker-ce: 19.03.8 #目前最新稳定版本
网络组件:calico(3.8.7) #目前最新稳定版本
硬件配置:4核4G
3. 服务器角色规划
节点名称 | 角色 | IP | 安装软件 |
---|---|---|---|
k8s-master-01 | master | 10.80.6.206 | kubeadm、kubelet、kubectl、docker、apiserver、controller-manage、scheduler、nginx、etcd、kube-proxy |
k8s-master-02 | master | 10.80.6.207 | kubeadm、kubelet、kubectl、docker、apiserver、controller-manage、scheduler、nginx、etcd、kube-proxy |
k8s-master-03 | master | 10.80.6.208 | kubeadm、kubelet、kubectl、docker、apiserver、controller-manage、scheduler、nginx、etcd、kube-proxy |
k8s-node-01 | node | 10.80.6.209 | kubeadm、kubelet、kubectl、docker、kube-proxy、nginx |
pod网段 | 11.210.0.0/16 | ||
service网段 | 10.96.0.0/12 |
4. 服务器初始化
4.1 关闭Selinux/firewalld/iptables(所有机器执行)
setenforce 0 \
&& sed -i 's/^SELINUX=.*$/SELINUX=disabled/' /etc/selinux/config \
&& getenforce
systemctl stop firewalld \
&& systemctl daemon-reload \
&& systemctl disable firewalld \
&& systemctl daemon-reload \
&& systemctl status firewalld
yum install -y iptables-services \
&& systemctl stop iptables \
&& systemctl disable iptables \
&& systemctl status iptables
4.2 为每台服务器添加host解析记录(所有机器执行)
cat >>/etc/hosts<<EOF
10.80.6.206 k8s-master-01
10.80.6.207 k8s-master-02
10.80.6.208 k8s-master-03
10.80.6.209 k8s-node-01
EOF
4.3 更换阿里源(所有机器执行)
yum install wget -y
cp -r /etc/yum.repos.d /etc/yum.repos.d.bak
rm -f /etc/yum.repos.d/*.repo
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo \
&& wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo
yum clean all && yum makecache
4.4 设置limits.conf(所有机器执行)
cat >> /etc/security/limits.conf <<EOF
# End of file
* soft nproc 10240000
* hard nproc 10240000
* soft nofile 10240000
* hard nofile 10240000
EOF
4.5 设置sysctl.conf(所有机器执行)
[ ! -e "/etc/sysctl.conf_bk" ] && /bin/mv /etc/sysctl.conf{,_bk} \
&& cat > /etc/sysctl.conf << EOF
fs.file-max=20480000
fs.nr_open=20480000
net.ipv4.tcp_max_tw_buckets = 180000
net.ipv4.tcp_sack = 1
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_rmem = 4096 87380 4194304
net.ipv4.tcp_wmem = 4096 16384 4194304
net.ipv4.tcp_max_syn_backlog = 16384
net.core.netdev_max_backlog = 32768
net.core.somaxconn = 32768
net.core.wmem_default = 8388608
net.core.rmem_default = 8388608
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_fin_timeout = 20
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 2
net.ipv4.tcp_syncookies = 1
#net.ipv4.tcp_tw_len = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_mem = 94500000 915000000 927000000
net.ipv4.tcp_max_orphans = 3276800
net.ipv4.ip_local_port_range = 1024 65000
#net.nf_conntrack_max = 6553500
#net.netfilter.nf_conntrack_max = 6553500
#net.netfilter.nf_conntrack_tcp_timeout_close_wait = 60
#net.netfilter.nf_conntrack_tcp_timeout_fin_wait = 120
#net.netfilter.nf_conntrack_tcp_timeout_time_wait = 120
#net.netfilter.nf_conntrack_tcp_timeout_established = 3600
EOF
sysctl -p
4.6 配置时间同步(所有机器执行)
ntpdate -u pool.ntp.org
crontab -e #加入定时任务
*/15 * * * * /usr/sbin/ntpdate -u pool.ntp.org >/dev/null 2>&1
4.7 配置k8s.conf(所有机器执行)
cat <<EOF > /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_nonlocal_bind = 1
net.ipv4.ip_forward = 1
vm.swappiness=0
EOF
#执行命令使其修改生效
modprobe br_netfilter \
&& sysctl -p /etc/sysctl.d/k8s.conf
4.8 关闭交换分区(所有机器执行)
swapoff -a
yes | cp /etc/fstab /etc/fstab_bak
cat /etc/fstab_bak |grep -v swap > /etc/fstab
4.9 升级系统内核(所有机器执行)
yum update -y
rpm -ivh /usr/local/src/kernel-ml-4.18.12-1.el7.elrepo.x86_64.rpm
rpm -ivh /usr/local/src/kernel-ml-devel-4.18.12-1.el7.elrepo.x86_64.rpm
查看内核修改结果
grub2-editenv list
#注意,这里执行下面的命令会出现多个内核版本
cat /boot/grub2/grub.cfg |grep "menuentry "
menuentry 'CentOS Linux (4.18.12-1.el7.elrepo.x86_64) 7 (Core)' --class centos --class gnu-linux --class gnu --class os --unrestricted $menuentry_id_option 'gnulinux-3.10.0-862.el7.x86_64-advanced-021a955b-781d-425a-8250-f39857437658'
设置默认内核版本,改版本必须已经存在,请注意执行命令cat /boot/grub2/grub.cfg |grep "menuentry "后生成的内容,切勿随意复制
grub2-set-default 'CentOS Linux (4.18.12-1.el7.elrepo.x86_64) 7 (Core)'
查看内核修改结果
grub2-editenv list
# 查看内核修改结果
grub2-editenv list
#重启以更换内核使其生效
reboot
4.10 加载ipvs模块(所有机器执行)
cat > /etc/sysconfig/modules/ipvs.modules <<EOF
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack_ipv4
EOF
chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep -e ip_vs -e nf_conntrack_ipv4
4.11 添加k8s yum源(所有机器执行)
cat << EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
4.12 安装服务器必备软件(所有服务器安装)
yum -y install wget vim iftop iotop net-tools nmon telnet lsof iptraf nmap httpd-tools lrzsz mlocate ntp ntpdate strace libpcap nethogs iptraf iftop nmon bridge-utils bind-utils telnet nc nfs-utils rpcbind nfs-utils dnsmasq python python-devel tcpdump mlocate tree gcc gcc-c++ pcre pcre-devel openssl openssl-devel
5、安装nginx(所有服务器安装)
useradd nginx -s /sbin/nologin -M
wget http://nginx.org/download/nginx-1.16.1.tar.gz
tar xvf nginx-1.16.1.tar.gz
cd nginx-16.1
#注意增加--with-stream模块,因为要用nginx的四层代理
./configure --user=nginx --group=nginx --prefix=/usr/local/nginx --with-http_realip_module --with-http_stub_status_module --with-http_ssl_module --with-http_flv_module --with-http_gzip_static_module --with-cc-opt=-O3 --with-stream
echo $?
make install
echo $?
cp /usr/local/nginx/conf/nginx.conf /usr/local/nginx/conf/nginx.conf.bak
> /usr/local/nginx/conf/nginx.conf
vi /usr/local/nginx/conf/nginx.conf
user nginx nginx;
worker_processes auto;
events {
worker_connections 65536;
use epoll;
}
error_log /var/log/nginx_error.log info;
stream {
upstream kube-servers {
hash $remote_addr consistent;
server k8s-master-01:6443 weight=5 max_fails=1 fail_timeout=3s;
server k8s-master-02:6443 weight=5 max_fails=1 fail_timeout=3s;
server k8s-master-03:6443 weight=5 max_fails=1 fail_timeout=3s;
}
server {
listen 8443 reuseport;
proxy_connect_timeout 3s;
# 加大timeout
proxy_timeout 3000s;
proxy_pass kube-servers;
}
}
#测试语法并启动
/usr/local/nginx/sbin/nginx -t
/usr/local/nginx/sbin/nginx
6、安装docker(所有服务器安装)
yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
yum install docker-ce -y
6.1 配置daemon.json文件(所有服务器配置)
{
"exec-opts": ["native.cgroupdriver=systemd"],
"registry-mirrors":[
"https://c6ai9izk.mirror.aliyuncs.com"
],
"bip":"172.133.100.1/24",
"max-concurrent-downloads":3,
"data-root":"/data/docker",
"log-driver":"json-file",
"log-opts":{
"max-size":"100m",
"max-file":"1"
},
"max-concurrent-uploads":5,
"storage-driver":"overlay2",
"storage-opts": [
"overlay2.override_kernel_check=true"
]
}
6.2 启动检查docker服务
systemctl enable docker \
&& systemctl restart docker \
&& systemctl status docker
7 使用kubeadm部署kubernetes
7.1 配置kubernetes.repo(每台机器都需要配置)
cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
7.2 安装必备软件(所有机器安装)
yum install -y kubelet-1.17.4 kubeadm-1.17.4 kubectl-1.17.4 ipvsadm ipset
#设置kubelet开机自启动,注意:这一步不能直接执行 systemctl start kubelet,会报错,成功初始化完后kubelet会自动起来
systemctl enable kubelet
7.3 修改初始化配置
在其中一台master上执行
使用kubeadm config print init-defaults > kubeadm-init.yaml 打印出默认配置,然后在根据自己的环境修改配置
注意需要修改advertiseAddress、controlPlaneEndpoint、imageRepository、serviceSubnet、podSubnet、kubernetesVersion
apiVersion: kubeadm.k8s.io/v1beta2
bootstrapTokens:
- groups:
- system:bootstrappers:kubeadm:default-node-token
token: abcdef.0123456789abcdef
ttl: 24h0m0s
usages:
- signing
- authentication
kind: InitConfiguration
localAPIEndpoint:
advertiseAddress: 10.80.6.206
bindPort: 6443
nodeRegistration:
criSocket: /var/run/dockershim.sock
name: k8s-master-01
taints:
- effect: NoSchedule
key: node-role.kubernetes.io/master
---
apiServer:
timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta2
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controllerManager: {}
dns:
type: CoreDNS
etcd:
local:
dataDir: /var/lib/etcd
imageRepository: registry.cn-hangzhou.aliyuncs.com/google_containers
kind: ClusterConfiguration
kubernetesVersion: v1.17.4
controlPlaneEndpoint: "127.0.0.1:8443" #注意此处,因为利用local nginx模式
networking:
dnsDomain: cluster.local
serviceSubnet: 10.96.0.0/12
podSubnet: 11.210.0.0/16
scheduler: {}
7.4 预下载镜像(3台master都执行,记得把文件kubeadm-init.yaml拷贝过去)
kubeadm config images pull --config kubeadm-init.yaml
7.5 初始化
其中一台master执行
kubeadm init --config initconfig.yaml --upload-certs #注意此处有个--upload-certs参数,该参数作用就是将相关的证书直接上传到etcd中保存,就不用执行拷贝证书到其他master服务器的操作了
初始化成功后,依次执行
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
然后在其他2台master服务器执行k8s-master-01生成的一串加入集群的命令,形如下:
kubeadm join 127.0.0.1:8443 --token abcdef.0123456789abcdef --discovery-token-ca-cert-hash sha256:12605c402e471271bdb11e460fd40bd130c534e73ad9b0b032909d99c79b7e29 --control-plane --certificate-key dbaf047f1383434c56ab6ca51cbce3f8184aa9ead0783664150edbca66c5c9ce
node节点执行类似下面的命令
注意:token有效期是有限的,如果旧的token过期,可以在master节点上使用
kubeadm token create --print-join-command
重新创建一条token。
kubeadm join 127.0.0.1:8443 --token xoyjnz.cebt8jbfwg8dko11 --discovery-token-ca-cert-hash sha256:12605c402e471271bdb11e460fd40bd130c534e73ad9b0b032909d99c79b7e29
8 部署网络插件calico
8.1 下载calico.yaml文件
wget -c https://docs.projectcalico.org/v3.8/getting-started/kubernetes/installation/hosted/kubernetes-datastore/calico-networking/1.7/calico.yaml
8.2 修改calico.yaml(根据实际情况配置)
修改CALICO_IPV4POOL_CIDR这个下面的vaule值,默认是192.168.0.0/16
# The default IPv4 pool to create on startup if none exists. Pod IPs will be
# chosen from this range. Changing this value after installation will have
# no effect. This should fall within `--cluster-cidr`.
- name: CALICO_IPV4POOL_CIDR
value: "11.210.0.0/16"
8.3 执行kubectl apply -f calico.yaml
[root@k8s-master-01 ~]# kubectl apply -f calico.yaml
configmap/calico-config created
customresourcedefinition.apiextensions.k8s.io/felixconfigurations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipamblocks.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/blockaffinities.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipamhandles.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipamconfigs.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/bgppeers.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/bgpconfigurations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ippools.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/hostendpoints.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/clusterinformations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/globalnetworkpolicies.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/globalnetworksets.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/networkpolicies.crd.projectcalico.org created
clusterrole.rbac.authorization.k8s.io/calico-kube-controllers created
clusterrolebinding.rbac.authorization.k8s.io/calico-kube-controllers created
clusterrole.rbac.authorization.k8s.io/calico-node created
clusterrolebinding.rbac.authorization.k8s.io/calico-node created
daemonset.extensions/calico-node created
serviceaccount/calico-node created
deployment.extensions/calico-kube-controllers created
serviceaccount/calico-kube-controllers created
8.4 查看节点状态
一开始没安装网络组件,是显示notReady的,装完cailco后就变成Ready,说明集群已就绪了,可以进行下一步验证集群是否搭建成功
[root@k8s-master-01 ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
k8s-master-01 Ready master 4h29m v1.17.4
k8s-master-02 Ready master 4h28m v1.17.4
k8s-master-03 Ready master 4h27m v1.17.4
k8s-node-01 Ready <none> 4h27m v1.17.4
9 kube-proxy开启ipvs[单个master节点执行]
9.1 修改ConfigMap的kube-system/kube-proxy中的config.conf,mode: "ipvs"
:
kubectl edit cm kube-proxy -n kube-system
9.2 之后重启各个节点上的kube-proxy pod:
[root@k8s-master-01 ~]# kubectl get pod -n kube-system | grep kube-proxy | awk '{system("kubectl delete pod "$1" -n kube-system")}'
pod "kube-proxy-8fpjb" deleted
pod "kube-proxy-dqqxh" deleted
pod "kube-proxy-mxvz2" deleted
pod "kube-proxy-np9x9" deleted
pod "kube-proxy-rtzcn" deleted
9.3 查看kube-proxy pod状态
[root@k8s-master-01 ~]# kubectl get pod -n kube-system | grep kube-proxy
kube-proxy-4fhpg 1/1 Running 0 81s
kube-proxy-9f2x6 1/1 Running 0 109s
kube-proxy-cxl5m 1/1 Running 0 89s
kube-proxy-lvp9q 1/1 Running 0 78s
kube-proxy-v4mg8 1/1 Running 0 99s
9.4 查看是否开启了ipvs
日志中打印出了
Using ipvs Proxier
,说明ipvs模式已经开启
[root@k8s-master-01 ~]# kubectl logs kube-proxy-mfv85 -n kube-system|grep ipvs
I0323 10:27:25.224163 1 server_others.go:172] Using ipvs Proxier.
10 查看ipvs状态
[root@k8s-master-01 ~]# ipvsadm -L -n
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 10.96.0.1:443 rr
-> 10.80.6.206:6443 Masq 1 0 0
-> 10.80.6.207:6443 Masq 1 0 0
-> 10.80.6.208:6443 Masq 1 0 0
TCP 10.96.0.10:53 rr
-> 11.210.151.129:53 Masq 1 0 0
-> 11.210.183.129:53 Masq 1 0 0
TCP 10.96.0.10:9153 rr
-> 11.210.151.129:9153 Masq 1 0 0
-> 11.210.183.129:9153 Masq 1 0 0
UDP 10.96.0.10:53 rr
-> 11.210.151.129:53 Masq 1 0 0
-> 11.210.183.129:53 Masq 1 0 0
11 测试一个运行一个容器
[root@k8s-master-01 ~]# kubectl run nginx --image=nginx:1.14 --replicas=2
kubectl run --generator=deployment/apps.v1 is DEPRECATED and will be removed in a future version. Use kubectl run --generator=run-pod/v1 or kubectl create instead.
deployment.apps/nginx created
11.1 查看nginx pod
[root@k8s-master-01 ~]# kubectl get pods -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
curl-69c656fd45-m5hh2 1/1 Running 1 4h2m 11.210.154.195 k8s-node-01 <none> <none>
nginx-5cf565498c-hhtzh 1/1 Running 0 4h4m 11.210.154.194 k8s-node-01 <none> <none>
nginx-5cf565498c-hmjlj 1/1 Running 0 4h4m 11.210.154.193 k8s-node-01 <none> <none>
11.2 通过curl命令测试nginx
[root@k8s-master-01 ~]# curl 11.210.154.194
<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>
<style>
body {
width: 35em;
margin: 0 auto;
font-family: Tahoma, Verdana, Arial, sans-serif;
}
</style>
</head>
<body>
<h1>Welcome to nginx!</h1>
<p>If you see this page, the nginx web server is successfully installed and
working. Further configuration is required.</p>
<p>For online documentation and support please refer to
<a href="http://nginx.org/">nginx.org</a>.<br/>
Commercial support is available at
<a href="http://nginx.com/">nginx.com</a>.</p>
<p><em>Thank you for using nginx.</em></p>
</body>
</html>
能显示出Welcome to nginx,说明pod运行正常,间接也说明集群可以正常使用
12 测试dns
进入后执行
nslookup kubernetes.default
[root@k8s-master-01 ~]# kubectl run curl --image=radial/busyboxplus:curl -it
kubectl run --generator=deployment/apps.v1 is DEPRECATED and will be removed in a future version. Use kubectl run --generator=run-pod/v1 or kubectl create instead.
If you don't see a command prompt, try pressing enter.
[ root@curl-66bdcf564-njcqk:/ ]$ nslookup kubernetes.default
Server: 10.96.0.10
Address 1: 10.96.0.10 kube-dns.kube-system.svc.cluster.local
Name: kubernetes.default
Address 1: 10.96.0.1 kubernetes.default.svc.cluster.local #能显示类似这样的输出,说明dns是okay的
至此local nginx实现高可用kubernete集群部署完成。
13 遇到的一些问题
本来想在初始化文件中加入挂载时区的文件,这样apiserver和controller manager的日志就不会晚8个小时了,挂载后无法初始化成功,没解决,后面再看看这个问题