KubeEdge集群搭建
KubeEdge集群搭建
1. 前言
上一篇文章我把整个KubeEdge的宏观架构设计讲了一遍,今天的内容是实操实践,手把手教你搭建KubeEdge集群。
2. 准备工作
需要两台机器,不管是笔记本也好还是树莓派都可以,单是有一个前提,作为Master节点的机器的配置至少要达到2C4G,不然跑不了k8s。还要就是OS要是Linux的,别的系统不行。负载节点就无所谓啦,比如说树莓派3B+或者是树莓派4B+都可以。现在的树莓派配置也是相当的高了,arm的小板子也能做到4C 8G。
3. 搭建K8s
搭建K8s我已经在之前的文章中写了,不会的直接回去看 传送门
4. 安装Cloudcore
安装有两种方式,一种源码编译手动安装,还有一种是使用ke提供的工具-keadm。手动安装比较繁琐,对于新手而言是一种很大的心智负担,最好大家还是都用keadm这个工具去安装,但是,这种方式安装最大的问题就是国内的墙的问题会导致很多某些资源无法下载,比如说 CRD的yaml,cloudcore启动的service,所以我会结合两者,采用半手动半工具的安装方式去帮助大家顺利的完成ke的集群搭建。
1 下载keadm
wget https://github.com/kubeedge/kubeedge/releases/download/v1.5.0/keadm-v1.5.0-linux-amd64.tar.gz
我写这篇文章的时候,ke的版本还是v1.5.0,所以我就以安装1.5.0版本的作为一个例子。
下载下来之后执行
tar -zxvf keadm-v1.5.0-linux-amd64.tar.gz # 解压keadm的tar.gz的包
cd keadm-v1.5.0-linux-amd64/keadm && chmod +x keadm && mv keadm /usr/local/bin
验证keadm是否安装成功
$ keadm version
version: version.Info{Major:"1", Minor:"5", GitVersion:"v1.5.0", GitCommit:"8b0913e04ef4ef826af6715d336e23a66e3774df", GitTreeState:"clean", BuildDate:"2020-11-13T08:04:56Z", GoVersion:"go1.15", Compiler:"gc", Platform:"linux/amd64"}
2 使用keadm安装cloudcore
keadm init --advertise-address=xxx.xx.xx.xx --kubeedge-version=1.5.0
Kubernetes version verification passed, KubeEdge installation will start...
--2021-02-11 13:20:41-- https://raw.githubusercontent.com/kubeedge/kubeedge/master/build/crds/devices/devices_v1alpha2_device.yaml
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.76.133
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.76.133|:443... connected.
Unable to establish SSL connection.
Converted links in 0 files in 0 seconds.
Error: failed to run 'sh -c cd /etc/kubeedge/crds/devices && wget -k --no-check-certificate --progress=bar:force https://raw.githubusercontent.com/kubeedge/kubeedge/master/build/crds/devices/devices_v1alpha2_device.yaml' because of error : exit status 4
Usage:
keadm init [flags]
Examples:
keadm init
- This command will download and install the default version of KubeEdge cloud component
keadm init --kubeedge-version=1.5.0 --kube-config=/root/.kube/config
- kube-config is the absolute path of kubeconfig which used to secure connectivity between cloudcore and kube-apiserver
Flags:
--advertise-address string Use this key to set IPs in cloudcore's certificate SubAltNames field. eg: 10.10.102.78,10.10.102.79
--domainname string Use this key to set domain names in cloudcore's certificate SubAltNames field. eg: www.cloudcore.cn,www.kubeedge.cn
-h, --help help for init
--kube-config string Use this key to set kube-config path, eg: $HOME/.kube/config (default "/root/.kube/config")
--kubeedge-version string Use this key to download and use the required KubeEdge version
--master string Use this key to set K8s master address, eg: http://127.0.0.1:8080
--tarballpath string Use this key to set the temp directory path for KubeEdge tarball, if not exist, download it
F0211 13:20:41.433946 15198 keadm.go:27] failed to run 'sh -c cd /etc/kubeedge/crds/devices && wget -k --no-check-certificate --progress=bar:force https://raw.githubusercontent.com/kubeedge/kubeedge/master/build/crds/devices/devices_v1alpha2_device.yaml' because of error : exit status 4
goroutine 1 [running]:
k8s.io/klog.stacks(0xc0000d3e00, 0xc000026480, 0x122, 0x176)
/root/codes/src/github.com/kubeedge/kubeedge/vendor/k8s.io/klog/klog.go:883 +0xb9
k8s.io/klog.(*loggingT).output(0x2cb3c80, 0xc000000003, 0xc0000b4b60, 0x29d13f1, 0x8, 0x1b, 0x0)
/root/codes/src/github.com/kubeedge/kubeedge/vendor/k8s.io/klog/klog.go:834 +0x35f
k8s.io/klog.(*loggingT).printDepth(0x2cb3c80, 0xc000000003, 0x1, 0xc000843f68, 0x1, 0x1)
/root/codes/src/github.com/kubeedge/kubeedge/vendor/k8s.io/klog/klog.go:706 +0x12d
k8s.io/klog.(*loggingT).print(...)
/root/codes/src/github.com/kubeedge/kubeedge/vendor/k8s.io/klog/klog.go:697
k8s.io/klog.Fatal(...)
/root/codes/src/github.com/kubeedge/kubeedge/vendor/k8s.io/klog/klog.go:1264
main.main()
/root/codes/src/github.com/kubeedge/kubeedge/keadm/cmd/keadm/keadm.go:27 +0x8a
--advertise-address=xxx.xx.xx.xx 这里的xxx.xx.xx.xx换成你master机器的ip,可以是内网地址,也可以是公网ip地址,--kubeedge-version=1.5.0 意思是指定安装的ke的版本,如果你默认不指定那么keadm会自动去下载最新的版本。很遗憾,我在执行
keadm init --advertise-address=xxx.xx.xx.xx --kubeedge-version=1.5.0
命令的时候出错了,这个错的问题在于网络被墙了,特别是在公有云的虚拟机上,出现这种问题的概率特别大,这种问题咋解决,一种是FQ翻出去,另外一种是在/etc/hosts下添加如下内容
# GitHub Start
52.74.223.119 github.com
192.30.253.119 gist.github.com
54.169.195.247 api.github.com
185.199.111.153 assets-cdn.github.com
151.101.76.133 raw.githubusercontent.com
151.101.108.133 user-images.githubusercontent.com
151.101.76.133 gist.githubusercontent.com
151.101.76.133 cloud.githubusercontent.com
151.101.76.133 camo.githubusercontent.com
151.101.76.133 avatars0.githubusercontent.com
151.101.76.133 avatars1.githubusercontent.com
151.101.76.133 avatars2.githubusercontent.com
151.101.76.133 avatars3.githubusercontent.com
151.101.76.133 avatars4.githubusercontent.com
151.101.76.133 avatars5.githubusercontent.com
151.101.76.133 avatars6.githubusercontent.com
151.101.76.133 avatars7.githubusercontent.com
151.101.76.133 avatars8.githubusercontent.com
# GitHub End
添加这个的目的就是我们遇到的错误其实就是keadm初始化过程中可能无法解析raw.githubusercontent.com。
如果试了上述方法还是不行,那我只能用杀手锏了,我们回过头看错误
F0211 13:20:41.433946 15198 keadm.go:27] failed to run 'sh -c cd /etc/kubeedge/crds/devices && wget -k --no-check-certificate --progress=bar:force https://raw.githubusercontent.com/kubeedge/kubeedge/master/build/crds/devices/devices_v1alpha2_device.yaml'
这是下载devices_v1alpha2_device.yaml这个crd的yaml下载不了啊。熟悉源码的朋友一定知道这不就是用于设备接入的CRD嘛。一个叫Devicle,一个叫DeviceModel。其实我的做法就是从源码里把这两个crd搞下来不就好了嘛。
mkdir -p /etc/kubeedge/crds/devices && mkdir -p /etc/kubeedge/crds/reliablesyncs
按照这个路径创建文件夹 devices和reliablesyncs都是keadm去下载的
cd /etc/kubeedge/crds/devices && vim devices_v1alpha2_devicemodel.yaml ## 创建 evices_v1alpha2_devicemodel.yaml
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
name: devicemodels.devices.kubeedge.io
spec:
group: devices.kubeedge.io
names:
kind: DeviceModel
plural: devicemodels
scope: Namespaced
validation:
openAPIV3Schema:
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
properties:
properties:
description: 'Required: List of device properties.'
items:
properties:
description:
description: The device property description.
type: string
name:
description: 'Required: The device property name.'
type: string
type:
description: 'Required: PropertyType represents the type and data
validation of the property.'
properties:
int:
properties:
accessMode:
description: 'Required: Access mode of property, ReadWrite
or ReadOnly.'
type: string
enum:
- ReadOnly
- ReadWrite
defaultValue:
format: int64
type: integer
maximum:
format: int64
type: integer
minimum:
format: int64
type: integer
unit:
description: The unit of the property
type: string
required:
- accessMode
type: object
string:
properties:
accessMode:
description: 'Required: Access mode of property, ReadWrite
or ReadOnly.'
type: string
enum:
- ReadOnly
- ReadWrite
defaultValue:
type: string
required:
- accessMode
type: object
double:
properties:
accessMode:
description: 'Required: Access mode of property, ReadWrite
or ReadOnly.'
type: string
enum:
- ReadOnly
- ReadWrite
defaultValue:
format: double
type: number
maximum:
format: double
type: number
minimum:
format: double
type: number
unit:
description: The unit of the property
type: string
required:
- accessMode
type: object
float:
properties:
accessMode:
description: 'Required: Access mode of property, ReadWrite
or ReadOnly.'
type: string
enum:
- ReadOnly
- ReadWrite
defaultValue:
format: float
type: number
maximum:
format: float
type: number
minimum:
format: float
type: number
unit:
description: The unit of the property
type: string
required:
- accessMode
type: object
boolean:
properties:
accessMode:
description: 'Required: Access mode of property, ReadWrite
or ReadOnly.'
type: string
enum:
- ReadOnly
- ReadWrite
defaultValue:
type: boolean
required:
- accessMode
type: object
bytes:
properties:
accessMode:
description: 'Required: Access mode of property, ReadWrite
or ReadOnly.'
type: string
enum:
- ReadOnly
- ReadWrite
required:
- accessMode
type: object
type: object
required:
- name
- type
type: object
type: array
type: object
version: v1alpha2
cd /etc/kubeedge/crds/devices && vim devices_v1alpha2_device.yaml
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
labels:
controller-tools.k8s.io: "1.0"
name: devices.devices.kubeedge.io
spec:
group: devices.kubeedge.io
names:
kind: Device
plural: devices
scope: Namespaced
validation:
openAPIV3Schema:
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
properties:
deviceModelRef:
description: 'Required: DeviceModelRef is reference to the device model
used as a template to create the device instance.'
type: object
nodeSelector:
description: NodeSelector indicates the binding preferences between
devices and nodes. Refer to k8s.io/kubernetes/pkg/apis/core NodeSelector
for more details
type: object
protocol:
description: 'Required: The protocol configuration used to connect to
the device.'
properties:
bluetooth:
description: Protocol configuration for bluetooth
properties:
macAddress:
description: Unique identifier assigned to the device.
type: string
type: object
modbus:
description: Protocol configuration for modbus
properties:
slaveID:
description: Required. 0-255
format: int64
type: integer
minimum: 0
maximum: 255
required:
- slaveID
type: object
opcua:
description: Protocol configuration for opc-ua
properties:
certificate:
description: Certificate for access opc server.
type: string
password:
description: Password for access opc server.
type: string
privateKey:
description: PrivateKey for access opc server.
type: string
securityMode:
description: Defaults to "none".
type: string
securityPolicy:
description: Defaults to "none".
type: string
timeout:
description: Timeout seconds for the opc server connection.???
format: int64
type: integer
url:
description: 'Required: The URL for opc server endpoint.'
type: string
userName:
description: Username for access opc server.
type: string
required:
- url
type: object
common:
description: Common part of protocol configuration
properties:
com:
properties:
baudRate:
description: Required. BaudRate 115200|57600|38400|19200|9600|4800|2400|1800|1200|600|300|200|150|134|110|75|50
format: int64
type: integer
enum:
- 115200
- 57600
- 38400
- 19200
- 9600
- 4800
- 2400
- 1800
- 1200
- 600
- 300
- 200
- 150
- 134
- 110
- 75
- 50
dataBits:
description: Required. Valid values are 8, 7, 6, 5.
format: int64
type: integer
enum:
- 8
- 7
- 6
- 5
parity:
description: Required. Valid options are "none", "even",
"odd". Defaults to "none".
type: string
enum:
- none
- even
- odd
serialPort:
description: Required.
type: string
stopBits:
description: Required. Bit that stops 1|2
format: int64
type: integer
enum:
- 1
- 2
required:
- baudRate
- dataBits
- parity
- serialPort
- stopBits
type: object
tcp:
properties:
ip:
description: Required.
type: string
port:
description: Required.
format: int64
type: integer
required:
- ip
- port
type: object
commType:
description: Communication type, like tcp client, tcp server or COM
type: string
reconnTimeout:
description: Reconnection timeout
type: integer
reconnRetryTimes:
description: Reconnecting retry times
type: integer
collectTimeout:
description: 'Define timeout of mapper collect from device.'
format: int64
type: integer
collectRetryTimes:
description: 'Define retry times of mapper will collect from device.'
format: int64
type: integer
collectType:
description: 'Define collect type, sync or async.'
type: string
enum:
- sync
- async
customizedValues:
description: Customized values for provided protocol
type: object
type: object
customizedProtocol:
description: Protocol configuration for customized Protocol
properties:
protocolName:
description: The name of protocol
type: string
configData:
description: customized config data
type: object
required:
- protocolName
type: object
type: object
propertyVisitors:
description: 'Required: List of property visitors which describe how
to access the device properties. PropertyVisitors must unique by propertyVisitor.propertyName.'
items:
properties:
bluetooth:
description: Bluetooth represents a set of additional visitor
config fields of bluetooth protocol.
properties:
characteristicUUID:
description: 'Required: Unique ID of the corresponding operation'
type: string
dataConverter:
description: Responsible for converting the data being read
from the bluetooth device into a form that is understandable
by the platform
properties:
endIndex:
description: 'Required: Specifies the end index of incoming
byte stream to be considered to convert the data the
value specified should be inclusive for example if 3
is specified it includes the third index'
format: int64
type: integer
orderOfOperations:
description: Specifies in what order the operations(which
are required to be performed to convert incoming data
into understandable form) are performed
items:
properties:
operationType:
description: 'Required: Specifies the operation
to be performed to convert incoming data'
type: string
enum:
- Add
- Subtract
- Multiply
- Divide
operationValue:
description: 'Required: Specifies with what value
the operation is to be performed'
format: double
type: number
type: object
type: array
shiftLeft:
description: Refers to the number of bits to shift left,
if left-shift operation is necessary for conversion
format: int64
type: integer
shiftRight:
description: Refers to the number of bits to shift right,
if right-shift operation is necessary for conversion
format: int64
type: integer
startIndex:
description: 'Required: Specifies the start index of the
incoming byte stream to be considered to convert the
data. For example: start-index:2, end-index:3 concatenates
the value present at second and third index of the incoming
byte stream. If we want to reverse the order we can
give it as start-index:3, end-index:2'
format: int64
type: integer
required:
- endIndex
- startIndex
type: object
dataWrite:
description: 'Responsible for converting the data coming from
the platform into a form that is understood by the bluetooth
device For example: "ON":[1], "OFF":[0]'
type: object
required:
- characteristicUUID
type: object
modbus:
description: Modbus represents a set of additional visitor config
fields of modbus protocol.
properties:
isRegisterSwap:
description: Indicates whether the high and low register swapped.
Defaults to false.
type: boolean
isSwap:
description: Indicates whether the high and low byte swapped.
Defaults to false.
type: boolean
limit:
description: 'Required: Limit number of registers to read/write.'
format: int64
type: integer
offset:
description: 'Required: Offset indicates the starting register
number to read/write data.'
format: int64
type: integer
register:
description: 'Required: Type of register'
type: string
enum:
- CoilRegister
- DiscreteInputRegister
- InputRegister
- HoldingRegister
scale:
description: The scale to convert raw property data into final
units. Defaults to 1.0
format: double
type: number
required:
- limit
- offset
- register
type: object
opcua:
description: Opcua represents a set of additional visitor config
fields of opc-ua protocol.
properties:
browseName:
description: The name of opc-ua node
type: string
nodeID:
description: 'Required: The ID of opc-ua node, e.g. "ns=1,i=1005"'
type: string
required:
- nodeID
type: object
customizedProtocol:
description: customized protocol
properties:
protocolName:
description: The name of protocol
type: string
configData:
description: customized config data
type: object
required:
- protocolName
- configData
type: object
propertyName:
description: 'Required: The device property name to be accessed.
This should refer to one of the device properties defined in
the device model.'
type: string
reportCycle:
description: 'Define how frequent mapper will report the value.'
format: int64
type: integer
collectCycle:
description: 'Define how frequent mapper will collect from device.'
format: int64
type: integer
customizedValues:
description: Customized values for visitor of provided protocols
type: object
required:
- propertyName
type: object
type: array
data:
properties:
dataTopic:
description: 'Topic used by mapper, all data collected from dataProperties
should be published to this topic,
the default value is $ke/events/device/+/data/update'
type: string
dataProperties:
description: A list of data properties, which are not required to be processed by edgecore
items:
properties:
propertyName:
description: 'Required: The property name for which the desired/reported
values are specified. This property should be present in the
device model.'
type: string
metadata:
description: Additional metadata like filter policy, should be k-v format
type: object
required:
- propertyName
type: object
type: array
type: object
required:
- deviceModelRef
- nodeSelector
type: object
status:
properties:
twins:
description: A list of device twins containing desired/reported desired/reported
values of twin properties. A passive device won't have twin properties
and this list could be empty.
items:
properties:
desired:
description: 'Required: the desired property value.'
properties:
metadata:
description: Additional metadata like timestamp when the value
was reported etc.
type: object
value:
description: 'Required: The value for this property.'
type: string
required:
- value
type: object
propertyName:
description: 'Required: The property name for which the desired/reported
values are specified. This property should be present in the
device model.'
type: string
reported:
description: 'Required: the reported property value.'
properties:
metadata:
description: Additional metadata like timestamp when the value
was reported etc.
type: object
value:
description: 'Required: The value for this property.'
type: string
required:
- value
type: object
required:
- propertyName
type: object
type: array
type: object
version: v1alpha2
device的crd好了,现在去弄reliablesyncs的crd还是一样
cd /etc/kubeedge/crds/reliablesyncs && vim cluster_objectsync_v1alpha1.yaml
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
labels:
controller-tools.k8s.io: "1.0"
name: clusterobjectsyncs.reliablesyncs.kubeedge.io
spec:
group: reliablesyncs.kubeedge.io
names:
kind: ClusterObjectSync
plural: clusterobjectsyncs
scope: Cluster
subresources:
status: {}
validation:
openAPIV3Schema:
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
properties:
objectType:
description: NodeSelector indicates the binding preferences between
devices and nodes. Refer to k8s.io/kubernetes/pkg/apis/core NodeSelector
for more details
type: string
objectName:
description: 'Required: The protocol configuration used to connect to
the device.'
type: string
status:
properties:
objectResourceVersion:
description: 'Required: DeviceModelRef is reference to the device model
used as a template to create the device instance.'
type: string
version: v1alpha
cd /etc/kubeedge/crds/reliablesyncs && vim objectsync_v1alpha1.yaml
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
labels:
controller-tools.k8s.io: "1.0"
name: objectsyncs.reliablesyncs.kubeedge.io
spec:
group: reliablesyncs.kubeedge.io
names:
kind: ObjectSync
plural: objectsyncs
scope: Namespaced
subresources:
status: {}
validation:
openAPIV3Schema:
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
properties:
objectType:
description: NodeSelector indicates the binding preferences between
devices and nodes. Refer to k8s.io/kubernetes/pkg/apis/core NodeSelector
for more details
type: string
objectName:
description: 'Required: The protocol configuration used to connect to
the device.'
type: string
status:
properties:
objectResourceVersion:
description: 'Required: DeviceModelRef is reference to the device model
used as a template to create the device instance.'
type: string
version: v1alpha1#
还有一个事情要提前说下,这些crd都准备好了之后,keadm会去下载kubedge的资源。我们实现准备好的话是不是就可以啦,主要还是怕你网络不行,网络ok的话就没有这个问题。
在 /etc/kubeedge下面执行
wget https://github.com/kubeedge/kubeedge/releases/download/v1.5.0/kubeedge-v1.5.0-linux-amd64.tar.gz
## 因为的机器是x86架构的处理器,所以是amd64,如果你是别的那就改下这个就行了。
这些都创建完了之后再次执行
keadm init --advertise-address=xxx.xx.xx.xx --kubeedge-version=1.5.0
Kubernetes version verification passed, KubeEdge installation will start...
W0211 13:58:27.853894 23320 warnings.go:67] apiextensions.k8s.io/v1beta1 CustomResourceDefinition is deprecated in v1.16+, unavailable in v1.22+; use apiextensions.k8s.io/v1 CustomResourceDefinition
W0211 13:58:27.862976 23320 warnings.go:67] apiextensions.k8s.io/v1beta1 CustomResourceDefinition is deprecated in v1.16+, unavailable in v1.22+; use apiextensions.k8s.io/v1 CustomResourceDefinition
W0211 13:58:27.870072 23320 warnings.go:67] apiextensions.k8s.io/v1beta1 CustomResourceDefinition is deprecated in v1.16+, unavailable in v1.22+; use apiextensions.k8s.io/v1 CustomResourceDefinition
W0211 13:58:27.876587 23320 warnings.go:67] apiextensions.k8s.io/v1beta1 CustomResourceDefinition is deprecated in v1.16+, unavailable in v1.22+; use apiextensions.k8s.io/v1 CustomResourceDefinition
Expected or Default KubeEdge version 1.5.0 is already downloaded and will checksum for it.
kubeedge-v1.5.0-linux-amd64.tar.gz checksum:
checksum_kubeedge-v1.5.0-linux-amd64.tar.gz.txt content:
[Run as service] start to download service file for cloudcore
Output failed: exit status 4
Error: fail to download service file,error:{failed to run command(cd /etc/kubeedge/ && sudo -E wget -t 5 -k --no-check-certificate https://raw.githubusercontent.com/kubeedge/kubeedge/release-1.5/build/tools/cloudcore.service), err:exit status 4}
Usage:
keadm init [flags]
Examples:
keadm init
- This command will download and install the default version of KubeEdge cloud component
keadm init --kubeedge-version=1.5.0 --kube-config=/root/.kube/config
- kube-config is the absolute path of kubeconfig which used to secure connectivity between cloudcore and kube-apiserver
Flags:
--advertise-address string Use this key to set IPs in cloudcore's certificate SubAltNames field. eg: 10.10.102.78,10.10.102.79
--domainname string Use this key to set domain names in cloudcore's certificate SubAltNames field. eg: www.cloudcore.cn,www.kubeedge.cn
-h, --help help for init
--kube-config string Use this key to set kube-config path, eg: $HOME/.kube/config (default "/root/.kube/config")
--kubeedge-version string Use this key to download and use the required KubeEdge version
--master string Use this key to set K8s master address, eg: http://127.0.0.1:8080
--tarballpath string Use this key to set the temp directory path for KubeEdge tarball, if not exist, download it
F0211 13:58:30.352570 23320 keadm.go:27] fail to download service file,error:{failed to run command(cd /etc/kubeedge/ && sudo -E wget -t 5 -k --no-check-certificate https://raw.githubusercontent.com/kubeedge/kubeedge/release-1.5/build/tools/cloudcore.service), err:exit status 4}
goroutine 1 [running]:
k8s.io/klog.stacks(0xc000599300, 0xc0008ce2c0, 0x11a, 0x2a4)
/root/codes/src/github.com/kubeedge/kubeedge/vendor/k8s.io/klog/klog.go:883 +0xb9
k8s.io/klog.(*loggingT).output(0x2cb3c80, 0xc000000003, 0xc0002f2850, 0x29d13f1, 0x8, 0x1b, 0x0)
/root/codes/src/github.com/kubeedge/kubeedge/vendor/k8s.io/klog/klog.go:834 +0x35f
k8s.io/klog.(*loggingT).printDepth(0x2cb3c80, 0xc000000003, 0x1, 0xc00089ff68, 0x1, 0x1)
/root/codes/src/github.com/kubeedge/kubeedge/vendor/k8s.io/klog/klog.go:706 +0x12d
k8s.io/klog.(*loggingT).print(...)
/root/codes/src/github.com/kubeedge/kubeedge/vendor/k8s.io/klog/klog.go:697
k8s.io/klog.Fatal(...)
/root/codes/src/github.com/kubeedge/kubeedge/vendor/k8s.io/klog/klog.go:1264
main.main()
/root/codes/src/github.com/kubeedge/kubeedge/keadm/cmd/keadm/keadm.go:27 +0x8a
到了最后还是出了一个问题,还是网络的问题啊,意思是cloudcore的service文件下载不了,那没办法了,手动创建咯。
vim cloudcore.service
[Unit]
Description=cloudcore.service
[Service]
Type=simple
ExecStart=/etc/kubeedge/kubeedge-v1.5.0-linux-amd64/cloud/cloudcore/cloudcore --logtostderr=false --log-file=/var/log/kubeedge/cloudcore.log -v=3
Restart=always
RestartSec=10
[Install]
WantedBy=multi-user.target
然后我们再执行
$ keadm init --advertise-address=106.13.177.82 --kubeedge-version=1.5.0
Kubernetes version verification passed, KubeEdge installation will start...
W0211 14:04:38.942389 29815 warnings.go:67] apiextensions.k8s.io/v1beta1 CustomResourceDefinition is deprecated in v1.16+, unavailable in v1.22+; use apiextensions.k8s.io/v1 CustomResourceDefinition
W0211 14:04:38.950811 29815 warnings.go:67] apiextensions.k8s.io/v1beta1 CustomResourceDefinition is deprecated in v1.16+, unavailable in v1.22+; use apiextensions.k8s.io/v1 CustomResourceDefinition
W0211 14:04:38.966118 29815 warnings.go:67] apiextensions.k8s.io/v1beta1 CustomResourceDefinition is deprecated in v1.16+, unavailable in v1.22+; use apiextensions.k8s.io/v1 CustomResourceDefinition
W0211 14:04:38.975750 29815 warnings.go:67] apiextensions.k8s.io/v1beta1 CustomResourceDefinition is deprecated in v1.16+, unavailable in v1.22+; use apiextensions.k8s.io/v1 CustomResourceDefinition
Expected or Default KubeEdge version 1.5.0 is already downloaded and will checksum for it.
kubeedge-v1.5.0-linux-amd64.tar.gz checksum:
checksum_kubeedge-v1.5.0-linux-amd64.tar.gz.txt content:
[Run as service] service file already exisits in /etc/kubeedge//cloudcore.service, skip download
kubeedge-v1.5.0-linux-amd64/
kubeedge-v1.5.0-linux-amd64/edge/
kubeedge-v1.5.0-linux-amd64/edge/edgecore
kubeedge-v1.5.0-linux-amd64/cloud/
kubeedge-v1.5.0-linux-amd64/cloud/csidriver/
kubeedge-v1.5.0-linux-amd64/cloud/csidriver/csidriver
kubeedge-v1.5.0-linux-amd64/cloud/admission/
kubeedge-v1.5.0-linux-amd64/cloud/admission/admission
kubeedge-v1.5.0-linux-amd64/cloud/cloudcore/
kubeedge-v1.5.0-linux-amd64/cloud/cloudcore/cloudcore
kubeedge-v1.5.0-linux-amd64/version
KubeEdge cloudcore is running, For logs visit: /var/log/kubeedge/cloudcore.log
CloudCore started
这就表示cloudcore已经安装完成了
3. 校验cloudcore安装情况
1. 检查进程的运行情况
$ ps aux | grep cloudcore
root 599 0.0 0.0 16188 1012 pts/0 S+ 14:07 0:00 grep --color=auto --exclude-dir=.bzr --exclude-dir=CVS --exclude-dir=.git --exclude-dir=.hg --exclude-dir=.svn --exclude-dir=.idea --exclude-dir=.tox cloudcore
root 32150 0.8 1.2 1269852 51632 ? Ssl 14:06 0:00 /etc/kubeedge/kubeedge-v1.5.0-linux-amd64/cloud/cloudcore/cloudcore --logtostderr=false --log-file=/var/log/kubeedge/cloudcore.log -v=3
如果你想把cloudcore交给systemed托管的话切记把cloudcore.service移到/etc/systemed/system下面然后再执行下systemctl daemon-reload
2. 查看k8s
正常的情况下cloudcore运行起来之后会在k8s器群创建一个叫kubeedge的namespace,这个ns下面有secret,存的就是ke集群的token cert啥的
$ k get secret -nkubeedge
NAME TYPE DATA AGE
casecret Opaque 2 21h
cloudcoresecret Opaque 2 21h
default-token-bt26c kubernetes.io/service-account-token 3 21h
tokensecret Opaque 1 21h
如果你的结果和我的一样,恭喜你,你的ke的cloudcore已经顺利安装完成了。
5. 安装edgecore
edgecore的安装相比cloudcore而言简单很多,不过我们还是要靠keadm这个工具,先在边缘节点上安装keadm,安装方式和上面cloudcore的一样,这里就不重复说了。如果你的边缘节点的网络不是很好的话还是建议提早下载好ke的资源文件,和安装cloudcore的时候一样
mkdir -p /etc/kubeedge && wget https://github.com/kubeedge/kubeedge/releases/download/v1.5.0/kubeedge-v1.5.0-linux-arm.tar.gz
## 我用树莓派作为边缘节点的,所以下载的是arm架构的
直接执行
keadm join --cloudcore-ipport=xx.xx.xx.xx:10000 --kubeedge-version=1.5.0 --token=<token>
-cloudcore-ipport表示的是cloudcore的对外暴露的ip就是公网ip了,记得打开安全组的端口如果你是在公有云服务器上的
--kubeedge-version就是ke的版本
--token=
$ keadm gettoken
b75afee838d35d8208a6880381ceca1aa1a1d72e289d307723da210a87cc6bf0.eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJleHAiOjE2MTMxMTAwMTJ9.jtrC0EBjuq3VpwIGQ21a5aPq5dr3wJniH6XGVnu_rKE
下面的这一大串就是token,这个token就是用于去拿ca证书的。
6. 检查ke集群是否安装完成
在master机器上执行
$ k get no
NAME STATUS ROLES AGE VERSION
didi-cloud Ready <none> 3d15h v1.19.7
k8s-master Ready master 4d v1.19.7
raspberrypi Ready agent,edge 16h v1.19.3-kubeedge-v1.5.0
树莓派就是ke的边缘节点,并且已经是ready,如果你的结果和我一样,那么恭喜你,你的ke的集群已经搭建完成了。