redis 5.0.7 源码阅读——跳跃表skiplist

redis中并没有专门给跳跃表两个文件。在5.0.7的版本中，结构体的声明与定义、接口的声明在server.h中，接口的定义在t_zset.c中，所有开头为zsl的函数。

一、数据结构

单个节点：

typedef struct zskiplistNode {
    //key，唯一
    sds ele;

    //分值，可重复
    double score;

    //后退指针
    struct zskiplistNode *backward;

    //层
    struct zskiplistLevel {
        //前进指针
        struct zskiplistNode *forward;
        //到本层下一节点的跨度，用于计算rank
        unsigned long span;
    } level[];
} zskiplistNode;

zskiplistNode定义了跳跃表中每个节点的数据结构，它是一个变长结构体。

 1 /*
 2 +------------------------+
 3 |sds ele                 |     /+-----------------------------+
 4 +------------------------+    / |struct zskiplistNode *forward|
 5 |double score            |   /  +-----------------------------+
 6 +------------------------+  /   |unsigned long span           |
 7 |zskiplistNode * backward| /    +-----------------------------+
 8 +------------------------+/     .                             .
 9 |zskiplistLevel  level[] |      .                             .
10 +------------------------+\     .                             .
11                            \    +-----------------------------+
12                             \   |struct zskiplistNode *forward|
13                              \  +-----------------------------+
14                               \ |unsigned long span           |
15                                \+-----------------------------+
16 */

将用以下结构表示：

 1 /*
 2 +--------+
 3 |level[1]|
 4 |1(span) |
 5 +--------+
 6 |level[0]|
 7 |1(span) |
 8 +--------+
 9 |backward|
10 +--------+
11 |score   |
12 +--------+
13 |ele     |
14 +--------+
15 */

如：

 1 /*
 2 +--------+                +--------+                +--------+
 3 |level[1]|--------------->|level[1]|--------------->|level[1]|
 4 |2       |                |2       |                |0       |
 5 +--------+   +--------+   +--------+   +--------+   +--------+
 6 |level[0]|-->|level[0]|-->|level[0]|-->|level[0]|-->|level[0]|
 7 |1       |   |1       |   |1       |   |1       |   |0       |
 8 +--------+   +--------+   +--------+   +--------+   +--------+
 9 |backward|<--|backward|<--|backward|<--|backward|<--|backward| 
10 +--------+   +--------+   +--------+   +--------+   +--------+
11 |1       |   |2       |   |3       |   |4       |   |5       |
12 +--------+   +--------+   +--------+   +--------+   +--------+
13 |a       |   |b       |   |c       |   |d       |   |e       |
14 +--------+   +--------+   +--------+   +--------+   +--------+
15 */

跳表：

1 typedef struct zskiplist {
2     //头/尾节点
3     struct zskiplistNode *header, *tail;
4     //总长度
5     unsigned long length;
6     //总层数
7     int level;
8 } zskiplist;

因其头节点固定为空节点，固整体结构：

 1 /*
 2     +--------+                +--------+                +--------+
 3     |level[1]|--------------->|level[1]|--------------->|level[1]|
 4     |2       |                |2       |                |0       |
 5     +--------+   +--------+   +--------+   +--------+   +--------+
 6     |level[0]|-->|level[0]|-->|level[0]|-->|level[0]|-->|level[0]|
 7     |1       |   |1       |   |1       |   |1       |   |0       |
 8     +--------+   +--------+   +--------+   +--------+   +--------+
 9     |backward|<--|backward|<--|backward|<--|backward|<--|backward| 
10     +--------+   +--------+   +--------+   +--------+   +--------+
11     |0       |   |2       |   |3       |   |4       |   |5       |
12     +--------+   +--------+   +--------+   +--------+   +--------+
13     |NULL    |   |b       |   |c       |   |d       |   |e       |
14 +-->+--------+   +--------+   +--------+   +--------+   +--------+<--+
15 |                                                                    |
16 |   +--------+                                                       |
17 +---|header  |                                                       |
18     +--------+                                                       |
19     |tail    |-------------------------------------------------------+
20     +--------+
21     |length=4|
22     +--------+
23     |level=2 |
24     +--------+
25 */

每个level层都是一条单身链表，其中level[0]中包含所有元素。

二、创建

根据指定的level，创建一个跳表节点：

1 zskiplistNode *zslCreateNode(int level, double score, sds ele) {
2     zskiplistNode *zn =
3         zmalloc(sizeof(*zn)+level*sizeof(struct zskiplistLevel));
4     zn->score = score;
5     zn->ele = ele;
6     return zn;
7 }

创建一个跳表：

 1 #define ZSKIPLIST_MAXLEVEL 64 /* Should be enough for 2^64 elements */
 2 
 3 zskiplist *zslCreate(void) {
 4     int j;
 5     zskiplist *zsl;
 6 
 7     zsl = zmalloc(sizeof(*zsl));
 8     zsl->level = 1;
 9     zsl->length = 0;
10     zsl->header = zslCreateNode(ZSKIPLIST_MAXLEVEL,0,NULL);
11     for (j = 0; j < ZSKIPLIST_MAXLEVEL; j++) {
12         zsl->header->level[j].forward = NULL;
13         zsl->header->level[j].span = 0;
14     }
15     zsl->header->backward = NULL;
16     zsl->tail = NULL;
17     return zsl;
18 }

redis中定义的最大层数为64层。且在刚创建时，会生成一个空的头节点，这样就可以不用再考虑节点数从0至1或者从1至0时要处理的各种特殊情况。

刚创完的跳表结构（结构中以4做为最大层数，后同）：

 1 /*
 2       +--------+
 3       |level[3]|-->NULL
 4       |0       |
 5       +--------+
 6       |level[2]|-->NULL
 7       |0       |
 8       +--------+
 9       |level[1]|-->NULL
10       |0       |
11       +--------+
12       |level[0]|-->NULL
13       |0       |
14       +--------+
15 NULL<-|backward|
16       +--------+
17       |0       |
18       +--------+
19       |NULL    |
20   +-->+--------+
21   |           
22   |   +--------+
23   +---|header  |
24       +--------+
25       |tail    |-->NULL
26       +--------+
27       |length=0|
28       +--------+
29       |level=1 |
30       +--------+
31 */

三、插入节点

1 #define ZSKIPLIST_P 0.25      /* Skiplist P = 1/4 */
2 
3 int zslRandomLevel(void) {
4     int level = 1;
5     while ((random()&0xFFFF) < (ZSKIPLIST_P * 0xFFFF))
6         level += 1;
7     return (level<ZSKIPLIST_MAXLEVEL) ? level : ZSKIPLIST_MAXLEVEL;
8 }

redis中使用的决定新插入节点层数据的方法是抛硬币法，且“硬币”只有25%的几率是正面。

插入方法：

 1 zskiplistNode *zslInsert(zskiplist *zsl, double score, sds ele) {
 2     //update数组，用于存储查找路径
 3     zskiplistNode *update[ZSKIPLIST_MAXLEVEL], *x;
 4 
 5     //rank数组，用于存储每层路径节点的排名
 6     unsigned int rank[ZSKIPLIST_MAXLEVEL];
 7     int i, level;
 8 
 9     serverAssert(!isnan(score));
10     x = zsl->header;
11 
12     //先查找插入位置
13     for (i = zsl->level-1; i >= 0; i--) {
14         /* store rank that is crossed to reach the insert position */
15         rank[i] = i == (zsl->level-1) ? 0 : rank[i+1];
16         while (x->level[i].forward &&
17                 (x->level[i].forward->score < score ||
18                     (x->level[i].forward->score == score &&
19                     sdscmp(x->level[i].forward->ele,ele) < 0)))
20         {
21             rank[i] += x->level[i].span;
22             x = x->level[i].forward;
23         }
24         update[i] = x;
25     }
26 
27     //随机一个level
28     level = zslRandomLevel();
29 
30     //若当前最大level不够，则补齐update与rank数组
31     if (level > zsl->level) {
32         for (i = zsl->level; i < level; i++) {
33             rank[i] = 0;
34             update[i] = zsl->header;
35             update[i]->level[i].span = zsl->length;
36         }
37         zsl->level = level;
38     }
39 
40     //创建一个节点，并插入
41     x = zslCreateNode(level,score,ele);
42     for (i = 0; i < level; i++) {
43         x->level[i].forward = update[i]->level[i].forward;
44         update[i]->level[i].forward = x;
45 
46         x->level[i].span = update[i]->level[i].span - (rank[0] - rank[i]);
47         update[i]->level[i].span = (rank[0] - rank[i]) + 1;
48     }
49 
50     //update数组中，比插入节点level更高的各成员的跨度增加
51     for (i = level; i < zsl->level; i++) {
52         update[i]->level[i].span++;
53     }
54 
55     x->backward = (update[0] == zsl->header) ? NULL : update[0];
56     if (x->level[0].forward)
57         x->level[0].forward->backward = x;
58     else
59         zsl->tail = x;
60     zsl->length++;
61     return x;
62 }

从注释可知，redis的跳表允许同score的情况发生，但是不允许同ele，且是由调用者在外部保证。若插入顺序为e，b，c，d，则插入e时：

step1、定义update数组与rank数组。

 1 /*
 2 update         rank
 3 +--------+     +--------+
 4 |NULL    |     |0       |
 5 +--------+     +--------+
 6 |NULL    |     |0       |
 7 +--------+     +--------+
 8 |NULL    |     |0       |
 9 +--------+     +--------+
10 |NULL    |     |0       |
11 +--------+     +--------+
12 */

实际在linux环境运行时，不会默认初始化，应该是一堆脏数据，此处是为了方便处理结构

step2、查找位置后

 1 /*
 2 update         rank
 3 +--------+     +--------+
 4 |NULL    |     |0       |
 5 +--------+     +--------+
 6 |NULL    |     |0       |
 7 +--------+     +--------+
 8 |NULL    |     |0       |
 9 +--------+     +--------+
10 |header  |     |0       |
11 +--------+     +--------+
12 */

step3、e的level为2，比跳表的大，故要补齐update与rank数组

 1 /*
 2 update         rank
 3 +--------+     +--------+
 4 |NULL    |     |0       |
 5 +--------+     +--------+
 6 |NULL    |     |0       |
 7 +--------+     +--------+
 8 |header  |     |0       |
 9 +--------+     +--------+
10 |header  |     |0       |
11 +--------+     +--------+
12 */

step4、插入节点，与单身链表插入相同，将新节点e各层，插入到update数组中记录的各层节点之后，并使用rank数组，计算跨度

 1 /*
 2       +--------+
 3       |level[3]|-->NULL
 4       |0       |
 5       +--------+
 6       |level[2]|-->NULL
 7       |0       |
 8       +--------+   +--------+
 9       |level[1]|-->|level[1]|-->NULL
10       |1       |   |0       |
11       +--------+   +--------+
12       |level[0]|-->|level[0]|-->NULL
13       |1       |   |0       |
14       +--------+   +--------+
15 NULL<-|backward|   |backward|
16       +--------+   +--------+
17       |0       |   |5       |
18       +--------+   +--------+
19       |NULL    |   |e       |
20   +-->+--------+   +--------+
21   |
22   |   +--------+
23   +---|header  |
24       +--------+
25       |tail    |
26       +--------+
27       |length=0|
28       +--------+
29       |level=1 |
30       +--------+
31 */

step5、处理新插入节点的backward指针，与跳表的tail指针：

 1 /*
 2       +--------+
 3       |level[3]|-->NULL
 4       |0       |
 5       +--------+
 6       |level[2]|-->NULL
 7       |0       |
 8       +--------+   +--------+
 9       |level[1]|-->|level[1]|-->NULL
10       |1       |   |0       |
11       +--------+   +--------+
12       |level[0]|-->|level[0]|-->NULL
13       |1       |   |0       |
14       +--------+   +--------+
15 NULL<-|backward|   |backward|
16       +--------+   +--------+
17       |0       |   |5       |
18       +--------+   +--------+
19       |NULL    |   |e       |
20   +-->+--------+   +--------+<--+
21   |                             |
22   |   +--------+                |
23   +---|header  |                |
24       +--------+                |
25       |tail    |----------------+
26       +--------+
27       |length=1|
28       +--------+
29       |level=2 |
30       +--------+
31 
32 */

此时插入b：

找到位置后的update与rank数组：

 1 /*
 2 update         rank
 3 +--------+     +--------+
 4 |NULL    |     |0       |
 5 +--------+     +--------+
 6 |NULL    |     |0       |
 7 +--------+     +--------+
 8 |header  |     |0       |
 9 +--------+     +--------+
10 |header  |     |0       |
11 +--------+     +--------+
12 */

插入b节点后：

 1 /*
 2       +--------+
 3       |level[3]|-->NULL
 4       |0       |
 5       +--------+
 6       |level[2]|-->NULL
 7       |0       |
 8       +--------+                +--------+
 9       |level[1]|--------------->|level[1]|-->NULL
10       |2       |                |0       |
11       +--------+   +--------+   +--------+
12       |level[0]|-->|level[0]|-->|level[0]|-->NULL
13       |1       |   |1       |   |0       |
14       +--------+   +--------+   +--------+
15 NULL<-|backward|   |backward|<--|backward|
16       +--------+   +--------+   +--------+
17       |0       |   |2       |   |5       |
18       +--------+   +--------+   +--------+
19       |NULL    |   |b       |   |e       |
20   +-->+--------+   +--------+   +--------+<--+
21   |                                          |
22   |   +--------+                             |
23   +---|header  |                             |
24       +--------+                             |
25       |tail    |-----------------------------+
26       +--------+
27       |length=2|
28       +--------+
29       |level=2 |
30       +--------+
31 */

需要注意的是，update数组idx = 1的节点并没有新的插入操作，span要自增，表示本层跨度增加了1。

插入c时的update与rank数组：

 1 /*
 2 update         rank
 3 +--------+     +--------+
 4 |NULL    |     |0       |
 5 +--------+     +--------+
 6 |NULL    |     |0       |
 7 +--------+     +--------+
 8 |header  |     |0       |
 9 +--------+     +--------+
10 |b       |     |1       |
11 +--------+     +--------+
12 */

插入c后：

 1 /*
 2       +--------+
 3       |level[3]|-->NULL
 4       |0       |
 5       +--------+
 6       |level[2]|-->NULL
 7       |0       |
 8       +--------+                +--------+   +--------+
 9       |level[1]|--------------->|level[1]|-->|level[1]|-->NULL
10       |2       |                |1       |   |0       |
11       +--------+   +--------+   +--------+   +--------+
12       |level[0]|-->|level[0]|-->|level[0]|-->|level[0]|-->NULL
13       |1       |   |1       |   |1       |   |0       |
14       +--------+   +--------+   +--------+   +--------+
15 NULL<-|backward|   |backward|<--|backward|<--|backward|
16       +--------+   +--------+   +--------+   +--------+
17       |0       |   |2       |   |3       |   |5       |
18       +--------+   +--------+   +--------+   +--------+
19       |NULL    |   |b       |   |c       |   |e       |
20   +-->+--------+   +--------+   +--------+   +--------+<--+
21   |                                                       |
22   |   +--------+                                          |
23   +---|header  |                                          |
24       +--------+                                          |
25       |tail    |------------------------------------------+
26       +--------+
27       |length=3|
28       +--------+
29       |level=2 |
30       +--------+
31 /*

最后插入d：

update与rank数组：

 1 /*
 2 update         rank
 3 +--------+     +--------+
 4 |NULL    |     |0       |
 5 +--------+     +--------+
 6 |NULL    |     |0       |
 7 +--------+     +--------+
 8 |c       |     |2       |
 9 +--------+     +--------+
10 |c       |     |2       |
11 +--------+     +--------+
12 */

插入d：

 1 /*
 2       +--------+
 3       |level[3]|-->NULL
 4       |0       |
 5       +--------+
 6       |level[2]|-->NULL
 7       |0       |
 8       +--------+                +--------+                +--------+
 9       |level[1]|--------------->|level[1]|--------------->|level[1]|-->NULL
10       |2       |                |2       |                |0       |
11       +--------+   +--------+   +--------+   +--------+   +--------+
12       |level[0]|-->|level[0]|-->|level[0]|-->|level[0]|-->|level[0]|-->NULL
13       |1       |   |1       |   |1       |   |1       |   |0       |
14       +--------+   +--------+   +--------+   +--------+   +--------+
15 NULL<-|backward|   |backward|<--|backward|<--|backward|<--|backward|
16       +--------+   +--------+   +--------+   +--------+   +--------+
17       |0       |   |2       |   |3       |   |4       |   |5       |
18       +--------+   +--------+   +--------+   +--------+   +--------+
19       |NULL    |   |b       |   |c       |   |d       |   |e       |
20   +-->+--------+   +--------+   +--------+   +--------+   +--------+<--+
21   |                                                                    |
22   |   +--------+                                                       |
23   +---|header  |                                                       |
24       +--------+                                                       |
25       |tail    |-------------------------------------------------------+
26       +--------+
27       |length=4|
28       +--------+
29       |level=2 |
30       +--------+
31 /*

如果此时要新插入节点a，score为4.5，则update与rank数组分别为：

 1 /*
 2 update         rank
 3 +--------+     +--------+
 4 |NULL    |     |0       |
 5 +--------+     +--------+
 6 |NULL    |     |0       |
 7 +--------+     +--------+
 8 |c       |     |2       |
 9 +--------+     +--------+
10 |d       |     |3       |
11 +--------+     +--------+
12 */

四、删除节点

在已经查找到位置，与已知update数组时的删除方法：

 1 void zslDeleteNode(zskiplist *zsl, zskiplistNode *x, zskiplistNode **update) {
 2     int i;
 3     for (i = 0; i < zsl->level; i++) {
 4         if (update[i]->level[i].forward == x) {
 5             update[i]->level[i].span += x->level[i].span - 1;
 6             update[i]->level[i].forward = x->level[i].forward;
 7         } else {
 8             update[i]->level[i].span -= 1;
 9         }
10     }
11     if (x->level[0].forward) {
12         x->level[0].forward->backward = x->backward;
13     } else {
14         zsl->tail = x->backward;
15     }
16     while(zsl->level > 1 && zsl->header->level[zsl->level-1].forward == NULL)
17         zsl->level--;
18     zsl->length--;
19 }

删除本节点之后，对应路径相应得做处理。

从跳表中删除指定节点的操作：

 1 int zslDelete(zskiplist *zsl, double score, sds ele, zskiplistNode **node) {
 2     zskiplistNode *update[ZSKIPLIST_MAXLEVEL], *x;
 3     int i;
 4 
 5     //先用score与ele查找，生成update数组
 6     x = zsl->header;
 7     for (i = zsl->level-1; i >= 0; i--) {
 8         while (x->level[i].forward &&
 9                 (x->level[i].forward->score < score ||
10                     (x->level[i].forward->score == score &&
11                      sdscmp(x->level[i].forward->ele,ele) < 0)))
12         {
13             x = x->level[i].forward;
14         }
15         update[i] = x;
16     }
17 
18     //跳表允许同score，防止误删，做一下ele校验
19     if (x && score == x->score && sdscmp(x->ele,ele) == 0) {
20         zslDeleteNode(zsl, x, update);
21         if (!node)
22             zslFreeNode(x);
23         else
24             *node = x;
25         return 1;
26     }
27     return 0;
28 }

如以下跳表：

 1 /*
 2       +--------+
 3       |level[3]|-->NULL
 4       |0       |
 5       +--------+
 6       |level[2]|-->NULL
 7       |0       |
 8       +--------+                +--------+                +--------+
 9       |level[1]|--------------->|level[1]|--------------->|level[1]|-->NULL
10       |2       |                |2       |                |0       |
11       +--------+   +--------+   +--------+   +--------+   +--------+
12       |level[0]|-->|level[0]|-->|level[0]|-->|level[0]|-->|level[0]|-->NULL
13       |1       |   |1       |   |1       |   |1       |   |0       |
14       +--------+   +--------+   +--------+   +--------+   +--------+
15 NULL<-|backward|   |backward|<--|backward|<--|backward|<--|backward|
16       +--------+   +--------+   +--------+   +--------+   +--------+
17       |0       |   |2       |   |3       |   |4       |   |5       |
18       +--------+   +--------+   +--------+   +--------+   +--------+
19       |NULL    |   |b       |   |c       |   |d       |   |e       |
20   +-->+--------+   +--------+   +--------+   +--------+   +--------+<--+
21   |                                                                    |
22   |   +--------+                                                       |
23   +---|header  |                                                       |
24       +--------+                                                       |
25       |tail    |-------------------------------------------------------+
26       +--------+
27       |length=4|
28       +--------+
29       |level=2 |
30       +--------+
31 /*

要删除节点d，生成的update数组为：

 1 /*
 2 update       
 3 +--------+   
 4 |NULL    |   
 5 +--------+   
 6 |NULL    |   
 7 +--------+   
 8 |c       |   
 9 +--------+   
10 |c       |   
11 +--------+   
12 */

由于d的level为1，故在level[0]层，使用从单向链表中删除节点的操作，把d移出，再给高于level[0]的update数组中所有成员的span自减，节点少了，跨度要跟着降低。

删除d之后的跳表：

 1 /*
 2       +--------+
 3       |level[3]|-->NULL
 4       |0       |
 5       +--------+
 6       |level[2]|-->NULL
 7       |0       |
 8       +--------+                +--------+   +--------+
 9       |level[1]|--------------->|level[1]|-->|level[1]|-->NULL
10       |2       |                |1       |   |0       |
11       +--------+   +--------+   +--------+   +--------+
12       |level[0]|-->|level[0]|-->|level[0]|-->|level[0]|-->NULL
13       |1       |   |1       |   |1       |   |0       |
14       +--------+   +--------+   +--------+   +--------+
15 NULL<-|backward|   |backward|<--|backward|<--|backward|
16       +--------+   +--------+   +--------+   +--------+
17       |0       |   |2       |   |3       |   |5       |
18       +--------+   +--------+   +--------+   +--------+
19       |NULL    |   |b       |   |c       |   |e       |
20   +-->+--------+   +--------+   +--------+   +--------+<--+
21   |                                                       |
22   |   +--------+                                          |
23   +---|header  |                                          |
24       +--------+                                          |
25       |tail    |------------------------------------------+
26       +--------+
27       |length=3|
28       +--------+
29       |level=2 |
30       +--------+
31 /*

五、销毁

 1 void zslFreeNode(zskiplistNode *node) {
 2     sdsfree(node->ele);
 3     zfree(node);
 4 }
 5 
 6 void zslFree(zskiplist *zsl) {
 7     zskiplistNode *node = zsl->header->level[0].forward, *next;
 8 
 9     zfree(zsl->header);
10     while(node) {
11         next = node->level[0].forward;
12         zslFreeNode(node);
13         node = next;
14     }
15     zfree(zsl);
16 }

销毁操作本身只是在level[0]层遍历所有节点，依次销毁。

redis 5.0.7 下载链接

http://download.redis.io/releases/redis-5.0.7.tar.gz

源码阅读顺序参考：

https://github.com/huangz1990/blog/blob/master/diary/2014/how-to-read-redis-source-code.rst

posted on 2020-11-24 15:21 treesky 阅读(185) 评论(0) 编辑收藏举报