zabbix4.0监控Apache配置记录

Last login: Wed Mar 20 09:10:32 2019 from 172.16.5.80
[root@vmhzplinuxserver ~]# cd /home
[root@vmhzplinuxserver home]# yum -y install zlib zlib-devel gcc* expat-devel pcre-devel libxml2-devel openssl-devel
Loaded plugins: fastestmirror
Determining fastest mirrors
* base: centos.ustc.edu.cn
* extras: centos.communilink.net
* updates: centos.communilink.net
base | 3.6 kB 00:00:00
extras | 3.4 kB 00:00:03
updates | 3.4 kB 00:00:03
updates/7/x86_64/primary_db FAILED A
http://centos.communilink.net/7.6.1810/updates/x86_64/repodata/2e9cb97edf0826cee6a329798042b73175266902023d3bb494ce706cc8db6c15-primary.sqlite.bz2: [Errno 12] Timeout on http://centos.communilink.net/7.6.1810/updates/x86_64/repodata/2e9cb97edf0826cee6a329798042b73175266902023d3bb494ce706cc8db6c15-primary.sqlite.bz2: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
(1/2): updates/7/x86_64/primary_db | 3.3 MB 00:00:01
extras/7/x86_64/primary_db FAILED A
http://centos.communilink.net/7.6.1810/extras/x86_64/repodata/43c71026fcdefd8e9770eeb304ad82573ce6c0364172a9e07ef088ead33394e6-primary.sqlite.bz2: [Errno 14] curl#18 - "transfer closed with 150843 bytes remaining to read"
Trying other mirror.
(2/2): extras/7/x86_64/primary_db | 187 kB 00:00:00
Package zlib-1.2.7-18.el7.x86_64 already installed and latest version
Resolving Dependencies
--> Running transaction check
---> Package expat-devel.x86_64 0:2.1.0-10.el7_3 will be installed
---> Package gcc.x86_64 0:4.8.5-36.el7_6.1 will be installed
--> Processing Dependency: libgomp = 4.8.5-36.el7_6.1 for package: gcc-4.8.5-36.el7_6.1.x86_64
--> Processing Dependency: cpp = 4.8.5-36.el7_6.1 for package: gcc-4.8.5-36.el7_6.1.x86_64
--> Processing Dependency: libgcc >= 4.8.5-36.el7_6.1 for package: gcc-4.8.5-36.el7_6.1.x86_64
--> Processing Dependency: glibc-devel >= 2.2.90-12 for package: gcc-4.8.5-36.el7_6.1.x86_64
--> Processing Dependency: libmpfr.so.4()(64bit) for package: gcc-4.8.5-36.el7_6.1.x86_64
--> Processing Dependency: libmpc.so.3()(64bit) for package: gcc-4.8.5-36.el7_6.1.x86_64
---> Package gcc-c++.x86_64 0:4.8.5-36.el7_6.1 will be installed
--> Processing Dependency: libstdc++-devel = 4.8.5-36.el7_6.1 for package: gcc-c++-4.8.5-36.el7_6.1.x86_64
--> Processing Dependency: libstdc++ = 4.8.5-36.el7_6.1 for package: gcc-c++-4.8.5-36.el7_6.1.x86_64
---> Package gcc-gfortran.x86_64 0:4.8.5-36.el7_6.1 will be installed
--> Processing Dependency: libquadmath-devel = 4.8.5-36.el7_6.1 for package: gcc-gfortran-4.8.5-36.el7_6.1.x86_64
--> Processing Dependency: libquadmath = 4.8.5-36.el7_6.1 for package: gcc-gfortran-4.8.5-36.el7_6.1.x86_64
--> Processing Dependency: libgfortran = 4.8.5-36.el7_6.1 for package: gcc-gfortran-4.8.5-36.el7_6.1.x86_64
--> Processing Dependency: libgfortran.so.3()(64bit) for package: gcc-gfortran-4.8.5-36.el7_6.1.x86_64
---> Package gcc-gnat.x86_64 0:4.8.5-36.el7_6.1 will be installed
--> Processing Dependency: libgnat-devel = 4.8.5-36.el7_6.1 for package: gcc-gnat-4.8.5-36.el7_6.1.x86_64
--> Processing Dependency: libgnat = 4.8.5-36.el7_6.1 for package: gcc-gnat-4.8.5-36.el7_6.1.x86_64
---> Package gcc-go.x86_64 0:4.8.5-36.el7_6.1 will be installed
--> Processing Dependency: libgo-devel = 4.8.5-36.el7_6.1 for package: gcc-go-4.8.5-36.el7_6.1.x86_64
--> Processing Dependency: libgo = 4.8.5-36.el7_6.1 for package: gcc-go-4.8.5-36.el7_6.1.x86_64
---> Package gcc-objc.x86_64 0:4.8.5-36.el7_6.1 will be installed
--> Processing Dependency: libobjc = 4.8.5-36.el7_6.1 for package: gcc-objc-4.8.5-36.el7_6.1.x86_64
--> Processing Dependency: libobjc.so.4()(64bit) for package: gcc-objc-4.8.5-36.el7_6.1.x86_64
---> Package gcc-objc++.x86_64 0:4.8.5-36.el7_6.1 will be installed
---> Package gcc-plugin-devel.x86_64 0:4.8.5-36.el7_6.1 will be installed
--> Processing Dependency: mpfr-devel >= 2.2.1 for package: gcc-plugin-devel-4.8.5-36.el7_6.1.x86_64
--> Processing Dependency: libmpc-devel >= 0.8.1 for package: gcc-plugin-devel-4.8.5-36.el7_6.1.x86_64
--> Processing Dependency: gmp-devel >= 4.1.2-8 for package: gcc-plugin-devel-4.8.5-36.el7_6.1.x86_64
---> Package libxml2-devel.x86_64 0:2.9.1-6.el7_2.3 will be installed
--> Processing Dependency: xz-devel for package: libxml2-devel-2.9.1-6.el7_2.3.x86_64
---> Package openssl-devel.x86_64 1:1.0.2k-16.el7_6.1 will be installed
--> Processing Dependency: openssl-libs(x86-64) = 1:1.0.2k-16.el7_6.1 for package: 1:openssl-devel-1.0.2k-16.el7_6.1.x86_64
--> Processing Dependency: krb5-devel(x86-64) for package: 1:openssl-devel-1.0.2k-16.el7_6.1.x86_64
---> Package pcre-devel.x86_64 0:8.32-17.el7 will be installed
---> Package zlib-devel.x86_64 0:1.2.7-18.el7 will be installed
--> Running transaction check
---> Package cpp.x86_64 0:4.8.5-36.el7_6.1 will be installed
---> Package glibc-devel.x86_64 0:2.17-260.el7_6.3 will be installed
--> Processing Dependency: glibc-headers = 2.17-260.el7_6.3 for package: glibc-devel-2.17-260.el7_6.3.x86_64
--> Processing Dependency: glibc = 2.17-260.el7_6.3 for package: glibc-devel-2.17-260.el7_6.3.x86_64
--> Processing Dependency: glibc-headers for package: glibc-devel-2.17-260.el7_6.3.x86_64
---> Package gmp-devel.x86_64 1:6.0.0-15.el7 will be installed
---> Package krb5-devel.x86_64 0:1.15.1-37.el7_6 will be installed
--> Processing Dependency: libkadm5(x86-64) = 1.15.1-37.el7_6 for package: krb5-devel-1.15.1-37.el7_6.x86_64
--> Processing Dependency: krb5-libs(x86-64) = 1.15.1-37.el7_6 for package: krb5-devel-1.15.1-37.el7_6.x86_64
--> Processing Dependency: libverto-devel for package: krb5-devel-1.15.1-37.el7_6.x86_64
--> Processing Dependency: libselinux-devel for package: krb5-devel-1.15.1-37.el7_6.x86_64
--> Processing Dependency: libcom_err-devel for package: krb5-devel-1.15.1-37.el7_6.x86_64
--> Processing Dependency: keyutils-libs-devel for package: krb5-devel-1.15.1-37.el7_6.x86_64
---> Package libgcc.x86_64 0:4.8.5-36.el7 will be updated
---> Package libgcc.x86_64 0:4.8.5-36.el7_6.1 will be an update
---> Package libgfortran.x86_64 0:4.8.5-36.el7_6.1 will be installed
---> Package libgnat.x86_64 0:4.8.5-36.el7_6.1 will be installed
---> Package libgnat-devel.x86_64 0:4.8.5-36.el7_6.1 will be installed
---> Package libgo.x86_64 0:4.8.5-36.el7_6.1 will be installed
---> Package libgo-devel.x86_64 0:4.8.5-36.el7_6.1 will be installed
---> Package libgomp.x86_64 0:4.8.5-36.el7 will be updated
---> Package libgomp.x86_64 0:4.8.5-36.el7_6.1 will be an update
---> Package libmpc.x86_64 0:1.0.1-3.el7 will be installed
---> Package libmpc-devel.x86_64 0:1.0.1-3.el7 will be installed
---> Package libobjc.x86_64 0:4.8.5-36.el7_6.1 will be installed
---> Package libquadmath.x86_64 0:4.8.5-36.el7_6.1 will be installed
---> Package libquadmath-devel.x86_64 0:4.8.5-36.el7_6.1 will be installed
---> Package libstdc++.x86_64 0:4.8.5-36.el7 will be updated
---> Package libstdc++.x86_64 0:4.8.5-36.el7_6.1 will be an update
---> Package libstdc++-devel.x86_64 0:4.8.5-36.el7_6.1 will be installed
---> Package mpfr.x86_64 0:3.1.1-4.el7 will be installed
---> Package mpfr-devel.x86_64 0:3.1.1-4.el7 will be installed
---> Package openssl-libs.x86_64 1:1.0.2k-16.el7 will be updated
--> Processing Dependency: openssl-libs(x86-64) = 1:1.0.2k-16.el7 for package: 1:openssl-1.0.2k-16.el7.x86_64
---> Package openssl-libs.x86_64 1:1.0.2k-16.el7_6.1 will be an update
---> Package xz-devel.x86_64 0:5.2.2-1.el7 will be installed
--> Running transaction check
---> Package glibc.x86_64 0:2.17-260.el7 will be updated
--> Processing Dependency: glibc = 2.17-260.el7 for package: glibc-common-2.17-260.el7.x86_64
---> Package glibc.x86_64 0:2.17-260.el7_6.3 will be an update
---> Package glibc-headers.x86_64 0:2.17-260.el7_6.3 will be installed
--> Processing Dependency: kernel-headers >= 2.2.1 for package: glibc-headers-2.17-260.el7_6.3.x86_64
--> Processing Dependency: kernel-headers for package: glibc-headers-2.17-260.el7_6.3.x86_64
---> Package keyutils-libs-devel.x86_64 0:1.5.8-3.el7 will be installed
---> Package krb5-libs.x86_64 0:1.15.1-34.el7 will be updated
---> Package krb5-libs.x86_64 0:1.15.1-37.el7_6 will be an update
---> Package libcom_err-devel.x86_64 0:1.42.9-13.el7 will be installed
---> Package libkadm5.x86_64 0:1.15.1-37.el7_6 will be installed
---> Package libselinux-devel.x86_64 0:2.5-14.1.el7 will be installed
--> Processing Dependency: libsepol-devel(x86-64) >= 2.5-10 for package: libselinux-devel-2.5-14.1.el7.x86_64
--> Processing Dependency: pkgconfig(libsepol) for package: libselinux-devel-2.5-14.1.el7.x86_64
---> Package libverto-devel.x86_64 0:0.2.5-4.el7 will be installed
---> Package openssl.x86_64 1:1.0.2k-16.el7 will be updated
---> Package openssl.x86_64 1:1.0.2k-16.el7_6.1 will be an update
--> Running transaction check
---> Package glibc-common.x86_64 0:2.17-260.el7 will be updated
---> Package glibc-common.x86_64 0:2.17-260.el7_6.3 will be an update
---> Package kernel-headers.x86_64 0:3.10.0-957.10.1.el7 will be installed
---> Package libsepol-devel.x86_64 0:2.5-10.el7 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

=================================================================================
Package Arch Version Repository Size
=================================================================================
Installing:
expat-devel x86_64 2.1.0-10.el7_3 base 57 k
gcc x86_64 4.8.5-36.el7_6.1 updates 16 M
gcc-c++ x86_64 4.8.5-36.el7_6.1 updates 7.2 M
gcc-gfortran x86_64 4.8.5-36.el7_6.1 updates 6.7 M
gcc-gnat x86_64 4.8.5-36.el7_6.1 updates 13 M
gcc-go x86_64 4.8.5-36.el7_6.1 updates 5.9 M
gcc-objc x86_64 4.8.5-36.el7_6.1 updates 5.7 M
gcc-objc++ x86_64 4.8.5-36.el7_6.1 updates 6.1 M
gcc-plugin-devel x86_64 4.8.5-36.el7_6.1 updates 827 k
libxml2-devel x86_64 2.9.1-6.el7_2.3 base 1.0 M
openssl-devel x86_64 1:1.0.2k-16.el7_6.1 updates 1.5 M
pcre-devel x86_64 8.32-17.el7 base 480 k
zlib-devel x86_64 1.2.7-18.el7 base 50 k
Installing for dependencies:
cpp x86_64 4.8.5-36.el7_6.1 updates 5.9 M
glibc-devel x86_64 2.17-260.el7_6.3 updates 1.1 M
glibc-headers x86_64 2.17-260.el7_6.3 updates 683 k
gmp-devel x86_64 1:6.0.0-15.el7 base 181 k
kernel-headers x86_64 3.10.0-957.10.1.el7 updates 8.0 M
keyutils-libs-devel x86_64 1.5.8-3.el7 base 37 k
krb5-devel x86_64 1.15.1-37.el7_6 updates 271 k
libcom_err-devel x86_64 1.42.9-13.el7 base 31 k
libgfortran x86_64 4.8.5-36.el7_6.1 updates 300 k
libgnat x86_64 4.8.5-36.el7_6.1 updates 966 k
libgnat-devel x86_64 4.8.5-36.el7_6.1 updates 2.7 M
libgo x86_64 4.8.5-36.el7_6.1 updates 2.2 M
libgo-devel x86_64 4.8.5-36.el7_6.1 updates 230 k
libkadm5 x86_64 1.15.1-37.el7_6 updates 178 k
libmpc x86_64 1.0.1-3.el7 base 51 k
libmpc-devel x86_64 1.0.1-3.el7 base 32 k
libobjc x86_64 4.8.5-36.el7_6.1 updates 79 k
libquadmath x86_64 4.8.5-36.el7_6.1 updates 189 k
libquadmath-devel x86_64 4.8.5-36.el7_6.1 updates 52 k
libselinux-devel x86_64 2.5-14.1.el7 base 187 k
libsepol-devel x86_64 2.5-10.el7 base 77 k
libstdc++-devel x86_64 4.8.5-36.el7_6.1 updates 1.5 M
libverto-devel x86_64 0.2.5-4.el7 base 12 k
mpfr x86_64 3.1.1-4.el7 base 203 k
mpfr-devel x86_64 3.1.1-4.el7 base 68 k
xz-devel x86_64 5.2.2-1.el7 base 46 k
Updating for dependencies:
glibc x86_64 2.17-260.el7_6.3 updates 3.7 M
glibc-common x86_64 2.17-260.el7_6.3 updates 12 M
krb5-libs x86_64 1.15.1-37.el7_6 updates 803 k
libgcc x86_64 4.8.5-36.el7_6.1 updates 102 k
libgomp x86_64 4.8.5-36.el7_6.1 updates 157 k
libstdc++ x86_64 4.8.5-36.el7_6.1 updates 305 k
openssl x86_64 1:1.0.2k-16.el7_6.1 updates 493 k
openssl-libs x86_64 1:1.0.2k-16.el7_6.1 updates 1.2 M

Transaction Summary
=================================================================================
Install 13 Packages (+26 Dependent packages)
Upgrade ( 8 Dependent packages)

Total download size: 108 M
Downloading packages:
Delta RPM : kernel-headers-3.10.0-957.10.1.el7.x86_64.rpm | 8.0 MB 00:00:14
---------------------------------------------------------------------------------
Total 3.1 MB/s | 108 MB 00:35
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Updating : libgcc-4.8.5-36.el7_6.1.x86_64 1/55
Updating : glibc-2.17-260.el7_6.3.x86_64 2/55
Updating : glibc-common-2.17-260.el7_6.3.x86_64 3/55
Installing : mpfr-3.1.1-4.el7.x86_64 4/55
Installing : libmpc-1.0.1-3.el7.x86_64 5/55
Updating : krb5-libs-1.15.1-37.el7_6.x86_64 6/55
Updating : 1:openssl-libs-1.0.2k-16.el7_6.1.x86_64 7/55
Installing : libquadmath-4.8.5-36.el7_6.1.x86_64 8/55
Installing : 1:gmp-devel-6.0.0-15.el7.x86_64 9/55
Installing : mpfr-devel-3.1.1-4.el7.x86_64 10/55
Updating : libstdc++-4.8.5-36.el7_6.1.x86_64 11/55
Installing : libgo-4.8.5-36.el7_6.1.x86_64 12/55
Installing : zlib-devel-1.2.7-18.el7.x86_64 13/55
Installing : libgo-devel-4.8.5-36.el7_6.1.x86_64 14/55
Installing : libstdc++-devel-4.8.5-36.el7_6.1.x86_64 15/55
Installing : libmpc-devel-1.0.1-3.el7.x86_64 16/55
Installing : libgfortran-4.8.5-36.el7_6.1.x86_64 17/55
Installing : libkadm5-1.15.1-37.el7_6.x86_64 18/55
Installing : cpp-4.8.5-36.el7_6.1.x86_64 19/55
Updating : libgomp-4.8.5-36.el7_6.1.x86_64 20/55
Installing : libobjc-4.8.5-36.el7_6.1.x86_64 21/55
Installing : libgnat-4.8.5-36.el7_6.1.x86_64 22/55
Installing : libverto-devel-0.2.5-4.el7.x86_64 23/55
Installing : libgnat-devel-4.8.5-36.el7_6.1.x86_64 24/55
Installing : libsepol-devel-2.5-10.el7.x86_64 25/55
Installing : xz-devel-5.2.2-1.el7.x86_64 26/55
Installing : keyutils-libs-devel-1.5.8-3.el7.x86_64 27/55
Installing : kernel-headers-3.10.0-957.10.1.el7.x86_64 28/55
Installing : glibc-headers-2.17-260.el7_6.3.x86_64 29/55
Installing : glibc-devel-2.17-260.el7_6.3.x86_64 30/55
Installing : gcc-4.8.5-36.el7_6.1.x86_64 31/55
Installing : gcc-objc-4.8.5-36.el7_6.1.x86_64 32/55
Installing : libquadmath-devel-4.8.5-36.el7_6.1.x86_64 33/55
Installing : gcc-c++-4.8.5-36.el7_6.1.x86_64 34/55
Installing : pcre-devel-8.32-17.el7.x86_64 35/55
Installing : libselinux-devel-2.5-14.1.el7.x86_64 36/55
Installing : libcom_err-devel-1.42.9-13.el7.x86_64 37/55
Installing : krb5-devel-1.15.1-37.el7_6.x86_64 38/55
Installing : 1:openssl-devel-1.0.2k-16.el7_6.1.x86_64 39/55
Installing : gcc-objc++-4.8.5-36.el7_6.1.x86_64 40/55
Installing : gcc-gfortran-4.8.5-36.el7_6.1.x86_64 41/55
Installing : gcc-gnat-4.8.5-36.el7_6.1.x86_64 42/55
Installing : gcc-plugin-devel-4.8.5-36.el7_6.1.x86_64 43/55
Installing : gcc-go-4.8.5-36.el7_6.1.x86_64 44/55
Installing : libxml2-devel-2.9.1-6.el7_2.3.x86_64 45/55
Updating : 1:openssl-1.0.2k-16.el7_6.1.x86_64 46/55
Installing : expat-devel-2.1.0-10.el7_3.x86_64 47/55
Cleanup : 1:openssl-1.0.2k-16.el7.x86_64 48/55
Cleanup : krb5-libs-1.15.1-34.el7.x86_64 49/55
Cleanup : 1:openssl-libs-1.0.2k-16.el7.x86_64 50/55
Cleanup : libstdc++-4.8.5-36.el7.x86_64 51/55
Cleanup : libgomp-4.8.5-36.el7.x86_64 52/55
Cleanup : glibc-2.17-260.el7.x86_64 53/55
Cleanup : glibc-common-2.17-260.el7.x86_64 54/55
Cleanup : libgcc-4.8.5-36.el7.x86_64 55/55
Verifying : gcc-objc-4.8.5-36.el7_6.1.x86_64 1/55
Verifying : glibc-common-2.17-260.el7_6.3.x86_64 2/55
Verifying : gcc-gfortran-4.8.5-36.el7_6.1.x86_64 3/55
Verifying : libcom_err-devel-1.42.9-13.el7.x86_64 4/55
Verifying : 1:gmp-devel-6.0.0-15.el7.x86_64 5/55
Verifying : 1:openssl-1.0.2k-16.el7_6.1.x86_64 6/55
Verifying : libgomp-4.8.5-36.el7_6.1.x86_64 7/55
Verifying : pcre-devel-8.32-17.el7.x86_64 8/55
Verifying : libstdc++-devel-4.8.5-36.el7_6.1.x86_64 9/55
Verifying : cpp-4.8.5-36.el7_6.1.x86_64 10/55
Verifying : krb5-devel-1.15.1-37.el7_6.x86_64 11/55
Verifying : expat-devel-2.1.0-10.el7_3.x86_64 12/55
Verifying : libxml2-devel-2.9.1-6.el7_2.3.x86_64 13/55
Verifying : kernel-headers-3.10.0-957.10.1.el7.x86_64 14/55
Verifying : libquadmath-devel-4.8.5-36.el7_6.1.x86_64 15/55
Verifying : libquadmath-4.8.5-36.el7_6.1.x86_64 16/55
Verifying : glibc-2.17-260.el7_6.3.x86_64 17/55
Verifying : zlib-devel-1.2.7-18.el7.x86_64 18/55
Verifying : mpfr-devel-3.1.1-4.el7.x86_64 19/55
Verifying : keyutils-libs-devel-1.5.8-3.el7.x86_64 20/55
Verifying : gcc-gnat-4.8.5-36.el7_6.1.x86_64 21/55
Verifying : gcc-objc++-4.8.5-36.el7_6.1.x86_64 22/55
Verifying : glibc-headers-2.17-260.el7_6.3.x86_64 23/55
Verifying : glibc-devel-2.17-260.el7_6.3.x86_64 24/55
Verifying : gcc-plugin-devel-4.8.5-36.el7_6.1.x86_64 25/55
Verifying : libstdc++-4.8.5-36.el7_6.1.x86_64 26/55
Verifying : libgfortran-4.8.5-36.el7_6.1.x86_64 27/55
Verifying : libmpc-devel-1.0.1-3.el7.x86_64 28/55
Verifying : xz-devel-5.2.2-1.el7.x86_64 29/55
Verifying : libgo-4.8.5-36.el7_6.1.x86_64 30/55
Verifying : libobjc-4.8.5-36.el7_6.1.x86_64 31/55
Verifying : libmpc-1.0.1-3.el7.x86_64 32/55
Verifying : libgcc-4.8.5-36.el7_6.1.x86_64 33/55
Verifying : libsepol-devel-2.5-10.el7.x86_64 34/55
Verifying : 1:openssl-devel-1.0.2k-16.el7_6.1.x86_64 35/55
Verifying : krb5-libs-1.15.1-37.el7_6.x86_64 36/55
Verifying : libgnat-devel-4.8.5-36.el7_6.1.x86_64 37/55
Verifying : gcc-4.8.5-36.el7_6.1.x86_64 38/55
Verifying : libverto-devel-0.2.5-4.el7.x86_64 39/55
Verifying : libgnat-4.8.5-36.el7_6.1.x86_64 40/55
Verifying : libkadm5-1.15.1-37.el7_6.x86_64 41/55
Verifying : mpfr-3.1.1-4.el7.x86_64 42/55
Verifying : gcc-go-4.8.5-36.el7_6.1.x86_64 43/55
Verifying : gcc-c++-4.8.5-36.el7_6.1.x86_64 44/55
Verifying : libselinux-devel-2.5-14.1.el7.x86_64 45/55
Verifying : 1:openssl-libs-1.0.2k-16.el7_6.1.x86_64 46/55
Verifying : libgo-devel-4.8.5-36.el7_6.1.x86_64 47/55
Verifying : libgcc-4.8.5-36.el7.x86_64 48/55
Verifying : 1:openssl-libs-1.0.2k-16.el7.x86_64 49/55
Verifying : glibc-2.17-260.el7.x86_64 50/55
Verifying : 1:openssl-1.0.2k-16.el7.x86_64 51/55
Verifying : glibc-common-2.17-260.el7.x86_64 52/55
Verifying : libgomp-4.8.5-36.el7.x86_64 53/55
Verifying : krb5-libs-1.15.1-34.el7.x86_64 54/55
Verifying : libstdc++-4.8.5-36.el7.x86_64 55/55

Installed:
expat-devel.x86_64 0:2.1.0-10.el7_3
gcc.x86_64 0:4.8.5-36.el7_6.1
gcc-c++.x86_64 0:4.8.5-36.el7_6.1
gcc-gfortran.x86_64 0:4.8.5-36.el7_6.1
gcc-gnat.x86_64 0:4.8.5-36.el7_6.1
gcc-go.x86_64 0:4.8.5-36.el7_6.1
gcc-objc.x86_64 0:4.8.5-36.el7_6.1
gcc-objc++.x86_64 0:4.8.5-36.el7_6.1
gcc-plugin-devel.x86_64 0:4.8.5-36.el7_6.1
libxml2-devel.x86_64 0:2.9.1-6.el7_2.3
openssl-devel.x86_64 1:1.0.2k-16.el7_6.1
pcre-devel.x86_64 0:8.32-17.el7
zlib-devel.x86_64 0:1.2.7-18.el7

Dependency Installed:
cpp.x86_64 0:4.8.5-36.el7_6.1
glibc-devel.x86_64 0:2.17-260.el7_6.3
glibc-headers.x86_64 0:2.17-260.el7_6.3
gmp-devel.x86_64 1:6.0.0-15.el7
kernel-headers.x86_64 0:3.10.0-957.10.1.el7
keyutils-libs-devel.x86_64 0:1.5.8-3.el7
krb5-devel.x86_64 0:1.15.1-37.el7_6
libcom_err-devel.x86_64 0:1.42.9-13.el7
libgfortran.x86_64 0:4.8.5-36.el7_6.1
libgnat.x86_64 0:4.8.5-36.el7_6.1
libgnat-devel.x86_64 0:4.8.5-36.el7_6.1
libgo.x86_64 0:4.8.5-36.el7_6.1
libgo-devel.x86_64 0:4.8.5-36.el7_6.1
libkadm5.x86_64 0:1.15.1-37.el7_6
libmpc.x86_64 0:1.0.1-3.el7
libmpc-devel.x86_64 0:1.0.1-3.el7
libobjc.x86_64 0:4.8.5-36.el7_6.1
libquadmath.x86_64 0:4.8.5-36.el7_6.1
libquadmath-devel.x86_64 0:4.8.5-36.el7_6.1
libselinux-devel.x86_64 0:2.5-14.1.el7
libsepol-devel.x86_64 0:2.5-10.el7
libstdc++-devel.x86_64 0:4.8.5-36.el7_6.1
libverto-devel.x86_64 0:0.2.5-4.el7
mpfr.x86_64 0:3.1.1-4.el7
mpfr-devel.x86_64 0:3.1.1-4.el7
xz-devel.x86_64 0:5.2.2-1.el7

Dependency Updated:
glibc.x86_64 0:2.17-260.el7_6.3 glibc-common.x86_64 0:2.17-260.el7_6.3
krb5-libs.x86_64 0:1.15.1-37.el7_6 libgcc.x86_64 0:4.8.5-36.el7_6.1
libgomp.x86_64 0:4.8.5-36.el7_6.1 libstdc++.x86_64 0:4.8.5-36.el7_6.1
openssl.x86_64 1:1.0.2k-16.el7_6.1 openssl-libs.x86_64 1:1.0.2k-16.el7_6.1

Complete!
[root@vmhzplinuxserver home]# rpm -qa| grep httpd
[root@vmhzplinuxserver home]# yum install -y httpd
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: centos.ustc.edu.cn
* extras: centos.communilink.net
* updates: centos.communilink.net
Resolving Dependencies
--> Running transaction check
---> Package httpd.x86_64 0:2.4.6-88.el7.centos will be installed
--> Processing Dependency: httpd-tools = 2.4.6-88.el7.centos for package: httpd-2.4.6-88.el7.centos.x86_64
--> Processing Dependency: /etc/mime.types for package: httpd-2.4.6-88.el7.centos.x86_64
--> Processing Dependency: libaprutil-1.so.0()(64bit) for package: httpd-2.4.6-88.el7.centos.x86_64
--> Processing Dependency: libapr-1.so.0()(64bit) for package: httpd-2.4.6-88.el7.centos.x86_64
--> Running transaction check
---> Package apr.x86_64 0:1.4.8-3.el7_4.1 will be installed
---> Package apr-util.x86_64 0:1.5.2-6.el7 will be installed
---> Package httpd-tools.x86_64 0:2.4.6-88.el7.centos will be installed
---> Package mailcap.noarch 0:2.1.41-2.el7 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

=================================================================================
Package Arch Version Repository Size
=================================================================================
Installing:
httpd x86_64 2.4.6-88.el7.centos base 2.7 M
Installing for dependencies:
apr x86_64 1.4.8-3.el7_4.1 base 103 k
apr-util x86_64 1.5.2-6.el7 base 92 k
httpd-tools x86_64 2.4.6-88.el7.centos base 90 k
mailcap noarch 2.1.41-2.el7 base 31 k

Transaction Summary
=================================================================================
Install 1 Package (+4 Dependent packages)

Total download size: 3.0 M
Installed size: 10 M
Downloading packages:
(1/5): apr-1.4.8-3.el7_4.1.x86_64.rpm | 103 kB 00:00:00
(2/5): apr-util-1.5.2-6.el7.x86_64.rpm | 92 kB 00:00:00
(3/5): httpd-tools-2.4.6-88.el7.centos.x86_64.rpm | 90 kB 00:00:00
(4/5): mailcap-2.1.41-2.el7.noarch.rpm | 31 kB 00:00:00
(5/5): httpd-2.4.6-88.el7.centos.x86_64.rpm | 2.7 MB 00:00:01
---------------------------------------------------------------------------------
Total 1.5 MB/s | 3.0 MB 00:02
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : apr-1.4.8-3.el7_4.1.x86_64 1/5
Installing : apr-util-1.5.2-6.el7.x86_64 2/5
Installing : httpd-tools-2.4.6-88.el7.centos.x86_64 3/5
Installing : mailcap-2.1.41-2.el7.noarch 4/5
Installing : httpd-2.4.6-88.el7.centos.x86_64 5/5
Verifying : httpd-tools-2.4.6-88.el7.centos.x86_64 1/5
Verifying : apr-1.4.8-3.el7_4.1.x86_64 2/5
Verifying : mailcap-2.1.41-2.el7.noarch 3/5
Verifying : httpd-2.4.6-88.el7.centos.x86_64 4/5
Verifying : apr-util-1.5.2-6.el7.x86_64 5/5

Installed:
httpd.x86_64 0:2.4.6-88.el7.centos

Dependency Installed:
apr.x86_64 0:1.4.8-3.el7_4.1 apr-util.x86_64 0:1.5.2-6.el7
httpd-tools.x86_64 0:2.4.6-88.el7.centos mailcap.noarch 0:2.1.41-2.el7

Complete!
[root@vmhzplinuxserver home]# cd /etc/httpd
[root@vmhzplinuxserver httpd]# ls
conf conf.d conf.modules.d logs modules run
[root@vmhzplinuxserver httpd]# cd conf
[root@vmhzplinuxserver conf]# ls
httpd.conf magic
[root@vmhzplinuxserver conf]# cp httpd.conf httpd.conf.bak
[root@vmhzplinuxserver conf]# ls
httpd.conf httpd.conf.bak magic
[root@vmhzplinuxserver conf]# systemctl enable httpd
Created symlink from /etc/systemd/system/multi-user.target.wants/httpd.service to /usr/lib/systemd/system/httpd.service.
[root@vmhzplinuxserver conf]# systemctl start httpd
[root@vmhzplinuxserver conf]# systemctl status httpd
● httpd.service - The Apache HTTP Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled; vendor preset: disabled)
Active: active (running) since Wed 2019-03-20 09:47:58 CST; 8s ago
Docs: man:httpd(8)
man:apachectl(8)
Main PID: 15697 (httpd)
Status: "Processing requests..."
CGroup: /system.slice/httpd.service
├─15697 /usr/sbin/httpd -DFOREGROUND
├─15698 /usr/sbin/httpd -DFOREGROUND
├─15699 /usr/sbin/httpd -DFOREGROUND
├─15700 /usr/sbin/httpd -DFOREGROUND
├─15701 /usr/sbin/httpd -DFOREGROUND
└─15702 /usr/sbin/httpd -DFOREGROUND

Mar 20 09:47:57 vmhzplinuxserver systemd[1]: Starting The Apache HTTP Server...
Mar 20 09:47:57 vmhzplinuxserver httpd[15697]: AH00558: httpd: Could not reli...e
Mar 20 09:47:58 vmhzplinuxserver systemd[1]: Started The Apache HTTP Server.
Hint: Some lines were ellipsized, use -l to show in full.
[root@vmhzplinuxserver conf]# ls
httpd.conf httpd.conf.bak magic
[root@vmhzplinuxserver conf]# vim httpd.conf
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so 'log/access_log'
# with ServerRoot set to '/www' will be interpreted by the
# server as '/www/log/access_log', where as '/log/access_log' will be
# interpreted as '/log/access_log'.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "/etc/httpd"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
Include conf.modules.d/*.conf

#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User apache
Group apache

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin root@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80

#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
#
<Directory />
AllowOverride none
Require all denied
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/var/www/html"

#
# Relax access to content within /var/www.
#
<Directory "/var/www">
AllowOverride None
# Allow open access:
Require all granted
</Directory>

# Further relax access to the default document root:
<Directory "/var/www/html">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None

#
# Controls who can get stuff from this server.
#
Require all granted
</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ".ht*">
Require all denied
</Files>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error_log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common

<IfModule logio_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
#CustomLog "logs/access_log" common

#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
CustomLog "logs/access_log" combined
</IfModule>

<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"

</IfModule>

#
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/var/www/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>

<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig /etc/mime.types

#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz

#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi

# For type maps (negotiated resources):
#AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
</IfModule>

#
# Specify a default charset for all content served; this enables
# interpretation of all content as UTF-8 by default. To use the
# default browser choice (ISO-8859-1), or to allow the META tags
# in HTML content to override this choice, comment out this
# directive:
#
AddDefaultCharset UTF-8

<IfModule mime_magic_module>
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
MIMEMagicFile conf/magic
</IfModule>

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults if commented: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
EnableSendfile on

# Supplemental configuration
#
# Load config files in the "/etc/httpd/conf.d" directory, if any.
IncludeOptional conf.d/*.conf
IncludeOptional conf.d/*.conf

"httpd.conf" 360L, 11876C written
[root@vmhzplinuxserver conf]# cat httpd.conf
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so 'log/access_log'
# with ServerRoot set to '/www' will be interpreted by the
# server as '/www/log/access_log', where as '/log/access_log' will be
# interpreted as '/log/access_log'.

#
# Relax access to content within /var/www.
#
<Directory "/var/www">
AllowOverride None
# Allow open access:
Require all granted
</Directory>

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None

#
# Controls who can get stuff from this server.
#
Require all granted
</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ".ht*">
Require all denied
</Files>

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common

<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>

#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
CustomLog "logs/access_log" combined
</IfModule>

#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.

</IfModule>

<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig /etc/mime.types

# For type maps (negotiated resources):
#AddHandler type-map var

# Supplemental configuration
#
# Load config files in the "/etc/httpd/conf.d" directory, if any.
IncludeOptional conf.d/*.conf

ExtendedStatus On
<location /server-status>
SetHandler server-status
Order Allow,Deny
Allow from all
</location>
[root@vmhzplinuxserver conf]# systemctl restart httpd
[root@vmhzplinuxserver conf]# systemctl status httpd
● httpd.service - The Apache HTTP Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled; vendor preset: disabled)
Active: active (running) since Wed 2019-03-20 09:49:50 CST; 8s ago
Docs: man:httpd(8)
man:apachectl(8)
Process: 15735 ExecStop=/bin/kill -WINCH ${MAINPID} (code=exited, status=0/SUCCESS)
Main PID: 15739 (httpd)
Status: "Processing requests..."
CGroup: /system.slice/httpd.service
├─15739 /usr/sbin/httpd -DFOREGROUND
├─15740 /usr/sbin/httpd -DFOREGROUND
├─15741 /usr/sbin/httpd -DFOREGROUND
├─15742 /usr/sbin/httpd -DFOREGROUND
├─15743 /usr/sbin/httpd -DFOREGROUND
└─15744 /usr/sbin/httpd -DFOREGROUND

Mar 20 09:49:50 vmhzplinuxserver systemd[1]: Starting The Apache HTTP Server...
Mar 20 09:49:50 vmhzplinuxserver httpd[15739]: AH00558: httpd: Could not reli...e
Mar 20 09:49:50 vmhzplinuxserver systemd[1]: Started The Apache HTTP Server.
Hint: Some lines were ellipsized, use -l to show in full.
[root@vmhzplinuxserver conf]# httpd -v
Server version: Apache/2.4.6 (CentOS)
Server built: Nov 5 2018 01:47:09
[root@vmhzplinuxserver conf]# yum install zabbix-get.x86_64
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: centos.ustc.edu.cn
* extras: centos.communilink.net
* updates: centos.communilink.net
No package zabbix-get.x86_64 available.
Error: Nothing to do
[root@vmhzplinuxserver conf]# rpm -ivh http://repo.zabbix.com/zabbix/3.2/rhel/7/x86_64/zabbix-release-3.2-1.el7.noarch.rpm
Retrieving http://repo.zabbix.com/zabbix/3.2/rhel/7/x86_64/zabbix-release-3.2-1.el7.noarch.rpm
warning: /var/tmp/rpm-tmp.1zcZGC: Header V4 RSA/SHA512 Signature, key ID a14fe591: NOKEY
Preparing... ################################# [100%]
Updating / installing...
1:zabbix-release-3.2-1.el7 ################################# [100%]
[root@vmhzplinuxserver conf]# yum install zabbix-get.x86_64
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: centos.ustc.edu.cn
* extras: centos.communilink.net
* updates: centos.communilink.net
zabbix | 2.9 kB 00:00:00
zabbix-non-supported | 951 B 00:00:00
zabbix/x86_64/primary_db | 87 kB 00:00:00
zabbix-non-supported/x86_64/primary | 1.6 kB 00:00:00
zabbix-non-supported 4/4
Resolving Dependencies
--> Running transaction check
---> Package zabbix-get.x86_64 0:3.2.11-1.el7 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

Transaction Summary
=================================================================================
Install 1 Package

Total download size: 241 k
Installed size: 972 k
Is this ok [y/d/N]: y
Downloading packages:
warning: /var/cache/yum/x86_64/7/zabbix/packages/zabbix-get-3.2.11-1.el7.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID a14fe591: NOKEY
Public key for zabbix-get-3.2.11-1.el7.x86_64.rpm is not installed
zabbix-get-3.2.11-1.el7.x86_64.rpm | 241 kB 00:00:00
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-ZABBIX-A14FE591
Importing GPG key 0xA14FE591:
Userid : "Zabbix LLC <packager@zabbix.com>"
Fingerprint: a184 8f53 52d0 22b9 471d 83d0 082a b56b a14f e591
Package : zabbix-release-3.2-1.el7.noarch (installed)
From : /etc/pki/rpm-gpg/RPM-GPG-KEY-ZABBIX-A14FE591
Is this ok [y/N]: y
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Warning: RPMDB altered outside of yum.
Installing : zabbix-get-3.2.11-1.el7.x86_64 1/1
Verifying : zabbix-get-3.2.11-1.el7.x86_64 1/1

Installed:
zabbix-get.x86_64 0:3.2.11-1.el7

Complete!
[root@vmhzplinuxserver conf]# zabbix_get -V
zabbix_get (Zabbix) 3.2.11
Revision 76339 27 December 2017, compilation time: Dec 27 2017 15:13:43

Copyright (C) 2017 Zabbix SIA
License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it according to
the license. There is NO WARRANTY, to the extent permitted by law.
[root@vmhzplinuxserver conf]# pwd
/etc/httpd/conf
[root@vmhzplinuxserver conf]# cd /home
[root@vmhzplinuxserver home]# ls
[root@vmhzplinuxserver home]# wget https://github.com/lorf/zapache/archive/master.zip
--2019-03-20 09:53:13-- https://github.com/lorf/zapache/archive/master.zip
Resolving github.com (github.com)... 13.250.177.223, 13.229.188.59, 52.74.223.119
Connecting to github.com (github.com)|13.250.177.223|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://codeload.github.com/lorf/zapache/zip/master [following]
--2019-03-20 09:53:14-- https://codeload.github.com/lorf/zapache/zip/master
Resolving codeload.github.com (codeload.github.com)... 13.250.162.133, 54.251.140.56, 13.229.189.0
Connecting to codeload.github.com (codeload.github.com)|13.250.162.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [application/zip]
Saving to: ‘master.zip’

[ <=> ] 8,626 --.-K/s in 0.05s

2019-03-20 09:53:15 (162 KB/s) - ‘master.zip’ saved [8626]

[root@vmhzplinuxserver home]# ll
total 12
-rw-r--r-- 1 root root 8626 Mar 20 09:53 master.zip
[root@vmhzplinuxserver home]# yum install unzip
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: centos.ustc.edu.cn
* extras: centos.communilink.net
* updates: centos.communilink.net
Resolving Dependencies
--> Running transaction check
---> Package unzip.x86_64 0:6.0-19.el7 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

Transaction Summary
=================================================================================
Install 1 Package

Total download size: 170 k
Installed size: 365 k
Is this ok [y/d/N]: y
Downloading packages:
unzip-6.0-19.el7.x86_64.rpm | 170 kB 00:00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : unzip-6.0-19.el7.x86_64 1/1
Verifying : unzip-6.0-19.el7.x86_64 1/1

Installed:
unzip.x86_64 0:6.0-19.el7

Complete!
[root@vmhzplinuxserver home]# yum install zip
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: centos.ustc.edu.cn
* extras: centos.communilink.net
* updates: centos.communilink.net
Resolving Dependencies
--> Running transaction check
---> Package zip.x86_64 0:3.0-11.el7 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

Transaction Summary
=================================================================================
Install 1 Package

Total download size: 260 k
Installed size: 796 k
Is this ok [y/d/N]: y
Downloading packages:
zip-3.0-11.el7.x86_64.rpm | 260 kB 00:00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : zip-3.0-11.el7.x86_64 1/1
Verifying : zip-3.0-11.el7.x86_64 1/1

Installed:
zip.x86_64 0:3.0-11.el7

Complete!
[root@vmhzplinuxserver home]# ll
total 12
-rw-r--r-- 1 root root 8626 Mar 20 09:53 master.zip
[root@vmhzplinuxserver home]# unzip master.zip
Archive: master.zip
24a764b2e224f9b8d0a6bc94dcadd7568b2fe650
creating: zapache-master/
inflating: zapache-master/README.md
inflating: zapache-master/httpd-server-status.conf.sample
inflating: zapache-master/userparameter_zapache.conf.sample
inflating: zapache-master/zapache
inflating: zapache-master/zapache-template-active.xml
inflating: zapache-master/zapache-template.xml
[root@vmhzplinuxserver home]# ls
master.zip zapache-master
[root@vmhzplinuxserver home]# cd zapache-master
[root@vmhzplinuxserver zapache-master]# ls
httpd-server-status.conf.sample zapache
README.md zapache-template-active.xml
userparameter_zapache.conf.sample zapache-template.xml
[root@vmhzplinuxserver zapache-master]# ll
total 124
-rw-r--r-- 1 root root 676 Apr 22 2016 httpd-server-status.conf.sample
-rw-r--r-- 1 root root 1780 Apr 22 2016 README.md
-rw-r--r-- 1 root root 224 Apr 22 2016 userparameter_zapache.conf.sample
-rwxr-xr-x 1 root root 6110 Apr 22 2016 zapache
-rw-r--r-- 1 root root 52258 Apr 22 2016 zapache-template-active.xml
-rw-r--r-- 1 root root 52024 Apr 22 2016 zapache-template.xml
[root@vmhzplinuxserver zapache-master]# cat httpd-server-status.conf.sample
#
# This is a sample Apache config file to setup status page.
# Put it in /etc/httpd/conf.d/ or otherwise integrate with Apache conf.
#

#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
ExtendedStatus On

#
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
# Change the ".example.com" to match your domain to enable.
#
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost
</Location>
[root@vmhzplinuxserver zapache-master]# cp userparameter_zapache.conf.sample /etc/zabbix/zabbix_agentd.d/
[root@vmhzplinuxserver zapache-master]# cd /etc/zabbix/zabbix_agentd.d/
[root@vmhzplinuxserver zabbix_agentd.d]# ls
userparameter_mysql.conf userparameter_zapache.conf.sample
[root@vmhzplinuxserver zabbix_agentd.d]# ll
total 8
-rw-r--r--. 1 root root 1531 Oct 1 16:41 userparameter_mysql.conf
-rw-r--r-- 1 root root 224 Mar 20 09:54 userparameter_zapache.conf.sample
[root@vmhzplinuxserver zabbix_agentd.d]# mv userparameter_zapache.conf.sample userparameter_zapache.conf
[root@vmhzplinuxserver zabbix_agentd.d]# ll
total 8
-rw-r--r--. 1 root root 1531 Oct 1 16:41 userparameter_mysql.conf
-rw-r--r-- 1 root root 224 Mar 20 09:54 userparameter_zapache.conf
[root@vmhzplinuxserver zabbix_agentd.d]# cat userparameter_zapache.conf
#
# This is a sample zabbix_agentd config file.
# Put it to /etc/zabbix_agentd.conf.d or otherwise integrate into agent config.
# Edit to your needs.
#
UserParameter=zapache[*],/var/lib/zabbixsrv/externalscripts/zapache \$1
[root@vmhzplinuxserver zabbix_agentd.d]# vim userparameter_zapache.conf
#
# This is a sample zabbix_agentd config file.
# Put it to /etc/zabbix_agentd.conf.d or otherwise integrate into agent config.
# Edit to your needs.
#
UserParameter=zapache[*],/var/lib/zabbixsrv/externalscripts/zapache \$1
~
"userparameter_zapache.conf" 6L, 210C written
[root@vmhzplinuxserver zabbix_agentd.d]# cat userparameter_zapache.conf
#
# This is a sample zabbix_agentd config file.
# Put it to /etc/zabbix_agentd.conf.d or otherwise integrate into agent config.
# Edit to your needs.
#
UserParameter=zapache[*],/etc/zabbix/scripts/zapache \$1
[root@vmhzplinuxserver zabbix_agentd.d]# cd ..
[root@vmhzplinuxserver zabbix]# ls
zabbix_agentd.conf zabbix_agentd.d
[root@vmhzplinuxserver zabbix]# mkdir scripts
[root@vmhzplinuxserver zabbix]# ll
total 12
drwxr-xr-x 2 root root 6 Mar 20 09:56 scripts
-rw-r--r-- 1 root root 10752 Mar 20 09:25 zabbix_agentd.conf
drwxr-xr-x. 2 root root 70 Mar 20 09:55 zabbix_agentd.d
[root@vmhzplinuxserver zabbix]# ls
scripts zabbix_agentd.conf zabbix_agentd.d
[root@vmhzplinuxserver zabbix]# cd /home
[root@vmhzplinuxserver home]# cd zapache-master
[root@vmhzplinuxserver zapache-master]# ls
httpd-server-status.conf.sample zapache
README.md zapache-template-active.xml
userparameter_zapache.conf.sample zapache-template.xml
[root@vmhzplinuxserver zapache-master]# cp zapache /etc/zabbix/scripts/zapache
[root@vmhzplinuxserver zapache-master]# cd /etc/zabbix/scripts
[root@vmhzplinuxserver scripts]# ll
total 8
-rwxr-xr-x 1 root root 6110 Mar 20 09:56 zapache
[root@vmhzplinuxserver scripts]# chown root.zabbix /etc/zabbix/scripts/zapache
[root@vmhzplinuxserver scripts]# ll
total 8
-rwxr-xr-x 1 root zabbix 6110 Mar 20 09:56 zapache
[root@vmhzplinuxserver scripts]# systemctl restart zabbix-agent
[root@vmhzplinuxserver scripts]# systemctl restart zabbix-agent
[root@vmhzplinuxserver scripts]# cd /tmp
[root@vmhzplinuxserver tmp]# chmod a+rwx -R /tmp
[root@vmhzplinuxserver tmp]# systemctl restart zabbix-agent
[root@vmhzplinuxserver tmp]# systemctl status zabbix-agent
● zabbix-agent.service - Zabbix Agent
Loaded: loaded (/usr/lib/systemd/system/zabbix-agent.service; enabled; vendor preset: disabled)
Active: active (running) since Wed 2019-03-20 09:58:19 CST; 5s ago
Process: 15929 ExecStop=/bin/kill -SIGTERM $MAINPID (code=exited, status=0/SUCCESS)
Process: 15933 ExecStart=/usr/sbin/zabbix_agentd -c $CONFFILE (code=exited, status=0/SUCCESS)
Main PID: 15935 (zabbix_agentd)
CGroup: /system.slice/zabbix-agent.service
├─15935 /usr/sbin/zabbix_agentd -c /etc/zabbix/zabbix_agentd.conf
├─15936 /usr/sbin/zabbix_agentd: collector [idle 1 sec]
├─15937 /usr/sbin/zabbix_agentd: listener #1 [waiting for connectio...
├─15938 /usr/sbin/zabbix_agentd: listener #2 [waiting for connectio...
├─15939 /usr/sbin/zabbix_agentd: listener #3 [waiting for connectio...
└─15940 /usr/sbin/zabbix_agentd: active checks #1 [idle 1 sec]

Mar 20 09:58:19 vmhzplinuxserver systemd[1]: Stopped Zabbix Agent.
Mar 20 09:58:19 vmhzplinuxserver systemd[1]: Starting Zabbix Agent...
Mar 20 09:58:19 vmhzplinuxserver systemd[1]: PID file /run/zabbix/zabbix_agen....
Mar 20 09:58:19 vmhzplinuxserver systemd[1]: Started Zabbix Agent.
Hint: Some lines were ellipsized, use -l to show in full.
[root@vmhzplinuxserver tmp]# cd /var/log/zabbix
[root@vmhzplinuxserver zabbix]# ls
zabbix_agentd.log zabbix_agentd.log-20190210.gz zabbix_agentd.log-20190217
[root@vmhzplinuxserver zabbix]# tailf zabbix_agentd.log
15935:20190320:095819.240 IPv6 support: YES
15935:20190320:095819.240 TLS support: YES
15935:20190320:095819.240 **************************
15935:20190320:095819.240 using configuration file: /etc/zabbix/zabbix_agentd.conf
15935:20190320:095819.240 agent #0 started [main process]
15936:20190320:095819.241 agent #1 started [collector]
15937:20190320:095819.241 agent #2 started [listener #1]
15940:20190320:095819.242 agent #5 started [active checks #1]
15938:20190320:095819.243 agent #3 started [listener #2]
15939:20190320:095819.243 agent #4 started [listener #3]
^C
[root@vmhzplinuxserver zabbix]# curl http://localhost/server-status?auto
Total Accesses: 38
Total kBytes: 71
Uptime: 564
ReqPerSec: .0673759
BytesPerSec: 128.908
BytesPerReq: 1913.26
BusyWorkers: 1
IdleWorkers: 7
Scoreboard: ____W___........................................................................................................................................................................................................................................................

posted on 2019-03-20 10:12 tiantom 阅读(873) 评论(0) 编辑收藏举报

刷新页面返回顶部

tiantom

zabbix4.0监控Apache配置记录

导航

公告