根据已经commit的数据,进行leader和peon之间的同步
Leader Election基本设计
- 按照rank表示优先级解决冲突问题,为每个monitor预先分配了一个rank
- 只会接受优先级(rank)比自己高、epoch比上次已接受的epoch大的选举请求
当选的leader,不一定有最新的数据
。所以在phase 1中,会根据已经commit的数据,进行leader和peon之间的同步- 用奇数的epoch表示选举状态,偶数表示稳定状态
- 一旦选举成功,会形成一个quorum,在该leader当选期间,
所有提议,必须quorum中全部成员同意
。
Leader Election主要过程和函数
- Elector::init()
初始化处理,从kv读取之前持久化的信息 - Elector::shutdown()
退出处理 - Elector::start()
推选自己(自荐) -
Elector::defer()
接受别人选举,延迟推选自己
-
Elector::handle_propose()
处理别人的自荐消息
- Elector::handle_ack()
处理别人的ack - Elector::victory()
宣布自己当选 - Elector::handle_victory()
处理别人当选消息 - Elector::expire()
选举超时处理 - Elector::reset_timer()
设置选举timer - Elector::cancel_timer()
取消timer - Elector::dispatch()
选举消息的分发函数
代码
初始化
/*Ceph的monitor使用leveldb作为持久化存储,下面的mon->store
就是leveldb操作的封装,由于很多数据共用同一leveldb,所以对
key的空间做了分级,Monitor::MONITOR_NAME可以认为是第一级key*/
void Elector::init()
{
//选举的epoch,递增分配。每次修改都做了持久化,这是从kv db读取。
epoch = mon->store->get(Monitor::MONITOR_NAME, "election_epoch");
if (!epoch)//首次使用
epoch = 1;
}
bump_epoch
/*将自己的epoch修改为参数 e,需要持久化到 kv 存储。*/
void Elector::bump_epoch(epoch_t e)
{
dout(10) << "bump_epoch " << epoch << " to " << e << dendl;
assert(epoch <= e);
epoch = e;
//使用一个事务,写kv存储
MonitorDBStore::TransactionRef t(new MonitorDBStore::Transaction);
t->put(Monitor::MONITOR_NAME, "election_epoch", epoch);
mon->store->apply_transaction(t);//持久化收到的epoch。
//join election会使 monitor 进入 STATE_ELECTING 状态
mon->join_election();
// clear up some state
electing_me = false; //因为别人的epoch比自己大,放弃选自己
acked_me.clear(); //这个acked_m,是选自己才有意义,在此清空。
classic_mons.clear();
}
推选自己为leader的函数(自荐)
//在启动后或者leader超时等场合,会发起自荐
void Elector::start()//推选自己
{
if (!participating) {
return;
}
//清空,表示还没人响应自己
acked_me.clear();
classic_mons.clear();
//从store获取持久化的epoch.
init();
if (epoch % 2 == 0) //epoch是偶数表明是稳定态
bump_epoch(epoch+1); //odd == election cycle 选举都是用的奇数epoch
start_stamp = ceph_clock_now(g_ceph_context);
electing_me = true; //设置为true,前面的bump_epoch可能设置为false了
//填写map的key是自己的rank,表明自己先同意了自己
acked_me[mon->rank] = CEPH_FEATURES_ALL;
leader_acked = -1;//无效值,表明我没有ack别人
//给monmap中每个成员发送消息。可以认为monmap成员是预先配置的,且配置了rank
for (unsigned i=0; i<mon->monmap->size(); ++i) {
if ((int)i == mon->rank) continue;
//消息中带有自己的epoch
Message *m = new MMonElection(MMonElection::OP_PROPOSE, epoch, mon->monmap);
mon->messenger->send_message(m, mon->monmap->get_inst(i));
}
reset_timer();//设置选举用的timer,参见expire()函数
}
响应别人自荐
//defer就是暂时放弃推选自己
void Elector::defer(int who)
{
if (electing_me) {//放弃选自己
acked_me.clear();
classic_mons.clear();
electing_me = false;
}
//表明我支持了"who"当leader. leader_acked不需要持久化,因为任何一个monitor在
//reboot后都会重新发起election。
leader_acked = who;
ack_stamp = ceph_clock_now(g_ceph_context);
//返回OP_ACK消息,即赞成对方当leader
MMonElection *m = new MMonElection(MMonElection::OP_ACK, epoch, mon->monmap);
m->sharing_bl = mon->get_supported_commands_bl();
mon->messenger->send_message(m, mon->monmap->get_inst(who));
// set a timer 对方在一定时间内,应该宣布自己当选才对
reset_timer(1.0); // give the leader some extra time to declare victory
}
timer相关工具函数
设置timer的工具函数
void Elector::reset_timer(double plus)
{
// set the timer
cancel_timer();
expire_event = new C_ElectionExpire(this);
mon->timer.add_event_after(g_conf->mon_lease + plus,
expire_event);
}
取消timer的工具函数
void Elector::cancel_timer()
{
if (expire_event) {
mon->timer.cancel_event(expire_event);
expire_event = 0;
}
}
超时处理
void Elector::expire()
{
// 如果是自荐,只要超过半数同意,就认为成功
if (electing_me &&
acked_me.size() > (unsigned)(mon->monmap->size() / 2)) {
//注意,expire判断的是 > monmap->size()/2,而handle_ack里面是等待全部ack。
// i win
victory();
} else {//没有推选自己
// whoever i deferred to didn't declare victory quickly enough.
if (mon->has_ever_joined)
start();//之前我加入过quorum,直接重新发动选举。因为monmap中会包含我。
else
mon->bootstrap();//否则,走bootstrap
}
}
成功当选leader处理
void Elector::victory()
{
leader_acked = -1;
electing_me = false;
uint64_t features = CEPH_FEATURES_ALL;
set<int> quorum;
for (map<int, uint64_t>::iterator p = acked_me.begin(); p != acked_me.end();
++p) {//如果是从expire()调用的victory(),则不是monmap的记录的所有node,
//但是肯定是超过半数。
quorum.insert(p->first);//ack过我的,全部进入quorum。
features &= p->second;
}
// decide what command set we're supporting
bool use_classic_commands = !classic_mons.empty();
// keep a copy to share with the monitor; we clear classic_mons in bump_epoch
set<int> copy_classic_mons = classic_mons;
cancel_timer();
assert(epoch % 2 == 1); // 选举期间用的奇数epoch
bump_epoch(epoch+1); // 选举完成,epoch变成偶数
// decide my supported commands for peons to advertise
const bufferlist *cmds_bl = NULL;
const MonCommand *cmds;
int cmdsize;
if (use_classic_commands) {
mon->get_classic_monitor_commands(&cmds, &cmdsize);
cmds_bl = &mon->get_classic_commands_bl();
} else {
mon->get_locally_supported_monitor_commands(&cmds, &cmdsize);
cmds_bl = &mon->get_supported_commands_bl();
}
//通知大家自己当选
for (set<int>::iterator p = quorum.begin();
p != quorum.end();
++p) {
if (*p == mon->rank) continue;
MMonElection *m = new MMonElection(MMonElection::OP_VICTORY, epoch, mon->monmap);
m->quorum = quorum;
m->quorum_features = features;
m->sharing_bl = *cmds_bl;
mon->messenger->send_message(m, mon->monmap->get_inst(*p));
}
//调用monitor的函数,它会发起paxos的propose
mon->win_election(epoch, quorum, features, cmds, cmdsize, ©_classic_mons);
}
处理别人的自荐消息
根据情况决定是否支持,或者决定该推荐自己
void Elector::handle_propose(MonOpRequestRef op)
{
MMonElection *m = static_cast<MMonElection*>(op->get_req());
dout(5) << "handle_propose from " << m->get_source() << dendl;
int from = m->get_source().num();//获取对方的rank
assert(m->epoch % 2 == 1); // election
uint64_t required_features = mon->get_required_features();
if ((required_features ^ m->get_connection()->get_features()) &
required_features) {//要求对方的feature,覆盖required_features
nak_old_peer(op);
return;
} else if (m->epoch > epoch) {//对方epoch比我大,放弃选自己,追随它。
bump_epoch(m->epoch);
} else if (m->epoch < epoch) {//对方epoch太小,否决
// got an "old" propose,
//发送消息的peer可能是刚刚加进来的,以前不在quorum里面。所以epoch比较小
if (epoch % 2 == 0 && // in a non-election cycle
mon->quorum.count(from) == 0) { // from someone outside the quorum
// a mon just started up, call a new election so they can rejoin!
//为什么我要start_election? 因为其epoch太旧,不可能当选。
mon->start_election();
} else {//认为收到了旧消息,忽略
dout(5) << " ignoring old propose" << dendl;
return;
}
}
//我比发送方的rank高。如果我没有响应过其他比我rank高的,就推选自己
if (mon->rank < from) {
// i would win over them.
if (leader_acked >= 0) { // we already acked someone
assert(leader_acked < from); // and they still win, of course 否则不可能ack它
} else {//如果没有acked过,比我优先级低的在推选自己,那么我应该选自己才对。
// wait, i should win!
if (!electing_me) {
mon->start_election();
}
}
} else {//发送方rank比我高
// they would win over me
//之前我没有赞成谁,或者之前那个优先级没现在这个高,则赞成现在这个
if (leader_acked < 0 || // haven't acked anyone yet, or
leader_acked > from || // they would win over who you did ack, or
leader_acked == from) { // this is the guy we're already deferring to
defer(from);//这个函数内部会发送 OP_ACK,支持发送方
} else {//我之前响应过别人,坚持之前的选择
// ignore them!
dout(5) << "no, we already acked " << leader_acked << dendl;
}
}
}
收到 ack之后的处理
//收到别人响应后的处理
void Elector::handle_ack(MonOpRequestRef op)
{
op->mark_event("elector:handle_ack");
MMonElection *m = static_cast<MMonElection*>(op->get_req());
dout(5) << "handle_ack from " << m->get_source() << dendl;
int from = m->get_source().num();
assert(m->epoch % 2 == 1); // election状态,必须是奇数
//下面dout解释了出现这个现象的原因,即我在自己重启,out了。
if (m->epoch > epoch) {
dout(5) << "woah, that's a newer epoch, i must have rebooted.
bumping and re-starting!" << dendl;
bump_epoch(m->epoch);//必须用新的epoch才能引起有效选举,否则被忽略了
start();
return;
}
assert(m->epoch == epoch);
uint64_t required_features = mon->get_required_features();
if ((required_features ^ m->get_connection()->get_features()) &
required_features) {
dout(5) << " ignoring ack from mon" << from
<< " without required features" << dendl;
return;
}
//如果正在推选自己
if (electing_me) {
// thanks
//acked_me是个map
acked_me[from] = m->get_connection()->get_features();
if (!m->sharing_bl.length())
classic_mons.insert(from);
dout(5) << " so far i have " << acked_me << dendl;
//所有人都赞成我
if (acked_me.size() == mon->monmap->size()) {
// if yes, shortcut to election finish
victory();
}
} else {//以前我曾经推选过自己,但是现在我已经投别人了
// ignore, i'm deferring already.
assert(leader_acked >= 0);
}
}
在别人当选后的处理
//收到别人宣告选举胜利的消息后的处理
void Elector::handle_victory(MonOpRequestRef op)
{
op->mark_event("elector:handle_victory");
MMonElection *m = static_cast<MMonElection*>(op->get_req());
int from = m->get_source().num();
assert(from < mon->rank);
assert(m->epoch % 2 == 0);
leader_acked = -1;
//之前我一定选举了它,所以epoch必须match,否则有问题。
// i should have seen this election if i'm getting the victory.
if (m->epoch != epoch + 1) {
//在victory()中,已经加1,所以是偶数,且比peon看到的大1
dout(5) << "woah, that's a funny epoch, i must have rebooted.
bumping and re-starting!" << dendl;
bump_epoch(m->epoch);
start();
return;
}
bump_epoch(m->epoch);//我也变成偶数epoch
// they win
mon->lose_election(epoch, m->quorum, from, m->quorum_features);
// cancel my timer
cancel_timer();//选举timer没用了
// stash leader's commands
if (m->sharing_bl.length()) {
MonCommand *new_cmds;
int cmdsize;
bufferlist::iterator bi = m->sharing_bl.begin();
MonCommand::decode_array(&new_cmds, &cmdsize, bi);
mon->set_leader_supported_commands(new_cmds, cmdsize);
} else { // they are a legacy monitor; use known legacy command set
const MonCommand *new_cmds;
int cmdsize;
mon->get_classic_monitor_commands(&new_cmds, &cmdsize);
mon->set_leader_supported_commands(new_cmds, cmdsize);
}
}
消息分发函数
消息的dispatch,里面有些关于monmap的处理。
/*monmap,是集群当前配置的所有monitor的集合。
*monmap在bootstrp过程中会在montior间同步,这里没仔细讨论。
*monmap中的各个monitor,只有参与选举投票的,才会进入quorum。*/
void Elector::dispatch(MonOpRequestRef op)
{
op->mark_event("elector:dispatch");
assert(op->is_type_election());
switch (op->get_req()->get_type()) {
case MSG_MON_ELECTION://elector只收election这个类别的消息
{
if (!participating) {
return;
}
if (op->get_req()->get_source().num() >= mon->monmap->size()) {
dout(5) << " ignoring bogus election message with bad mon rank "
<< op->get_req()->get_source() << dendl;
return;
}
MMonElection *em = static_cast<MMonElection*>(op->get_req());
// assume an old message encoding would have matched
if (em->fsid != mon->monmap->fsid) {
dout(0) << " ignoring election msg fsid "
<< em->fsid << " != " << mon->monmap->fsid << dendl;
return;
}
//选举是根据monmap干活的。monmap在bootstrap阶段大家已经同步了。
if (!mon->monmap->contains(em->get_source_addr())) {
dout(1) << "discarding election message: " << em->get_source_addr()
<< " not in my monmap " << *mon->monmap << dendl;
return;
}
MonMap *peermap = new MonMap;
peermap->decode(em->monmap_bl);
//比较二者的monmap的epoch,即二者看到的monitor配置应该相同。
if (peermap->epoch > mon->monmap->epoch) {
dout(0) << em->get_source_inst() << " has newer monmap epoch " << peermap->epoch
<< " > my epoch " << mon->monmap->epoch
<< ", taking it"
<< dendl;
mon->monmap->decode(em->monmap_bl);
MonitorDBStore::TransactionRef t(new MonitorDBStore::Transaction);
//更新了自己的monmap,并且写盘。实际上信任了对方的monmap。
t->put("monmap", mon->monmap->epoch, em->monmap_bl);
t->put("monmap", "last_committed", mon->monmap->epoch);
mon->store->apply_transaction(t);
//mon->monmon()->paxos->stash_latest(mon->monmap->epoch, em->monmap_bl);
cancel_timer();
mon->bootstrap();//重新做一次自举。自举后会重新选举
delete peermap;
return;
}
if (peermap->epoch < mon->monmap->epoch) {
//这种情况下,会用我的map去同步对方的。
dout(0) << em->get_source_inst() << " has older monmap epoch " << peermap->epoch
<< " < my epoch " << mon->monmap->epoch
<< dendl;
}
delete peermap;
switch (em->op) {
case MMonElection::OP_PROPOSE:
handle_propose(op);
return;
}
if (em->epoch < epoch) www.rcsx.org {//为什么又比较这个epoch?
dout(5) << "old epoch, dropping" << dendl;
break;
}
switch (em->op) {
case MMonElection::OP_ACK:
handle_ack(op);
return;
case MMonElection::OP_VICTORY:
handle_victory(op);
return;
case MMonElection::OP_NAK:
handle_nak(op);
return;
default:
assert(0);
}
}
break;
default:
assert(0);
}
}
//admin command处理,触发选举
void Elector::start_participating()
{
if (!participating) {
participating = true;
call_election();
}
}