POJ-1125-Stockbroker Grapevine
问题描述
Stockbrokers are known to overreact to rumours. You have been contracted to develop a method of spreading disinformation amongst the stockbrokers to give your employer the tactical edge in the stock market. For maximum effect, you have to spread the rumours in the fastest possible way.
Unfortunately for you, stockbrokers only trust information coming from their "Trusted sources" This means you have to take into account the structure of their contacts when starting a rumour. It takes a certain amount of time for a specific stockbroker to pass the rumour on to each of his colleagues. Your task will be to write a program that tells you which stockbroker to choose as your starting point for the rumour, as well as the time it will take for the rumour to spread throughout the stockbroker community. This duration is measured as the time needed for the last person to receive the information.
Unfortunately for you, stockbrokers only trust information coming from their "Trusted sources" This means you have to take into account the structure of their contacts when starting a rumour. It takes a certain amount of time for a specific stockbroker to pass the rumour on to each of his colleagues. Your task will be to write a program that tells you which stockbroker to choose as your starting point for the rumour, as well as the time it will take for the rumour to spread throughout the stockbroker community. This duration is measured as the time needed for the last person to receive the information.
输入
Your program will input data for different sets of stockbrokers. Each
set starts with a line with the number of stockbrokers. Following this
is a line for each stockbroker which contains the number of people who
they have contact with, who these people are, and the time taken for
them to pass the message to each person. The format of each stockbroker
line is as follows: The line starts with the number of contacts (n),
followed by n pairs of integers, one pair for each contact. Each pair
lists first a number referring to the contact (e.g. a '1' means person
number one in the set), followed by the time in minutes taken to pass a
message to that person. There are no special punctuation symbols or
spacing rules.
Each person is numbered 1 through to the number of stockbrokers. The time taken to pass the message on will be between 1 and 10 minutes (inclusive), and the number of contacts will range between 0 and one less than the number of stockbrokers. The number of stockbrokers will range from 1 to 100. The input is terminated by a set of stockbrokers containing 0 (zero) people.
Each person is numbered 1 through to the number of stockbrokers. The time taken to pass the message on will be between 1 and 10 minutes (inclusive), and the number of contacts will range between 0 and one less than the number of stockbrokers. The number of stockbrokers will range from 1 to 100. The input is terminated by a set of stockbrokers containing 0 (zero) people.
输出
For each set of data, your program must output a single line containing
the person who results in the fastest message transmission, and how
long before the last person will receive any given message after you
give it to this person, measured in integer minutes.
It is possible that your program will receive a network of connections that excludes some persons, i.e. some people may be unreachable. If your program detects such a broken network, simply output the message "disjoint". Note that the time taken to pass the message from person A to person B is not necessarily the same as the time taken to pass it from B to A, if such transmission is possible at all.
It is possible that your program will receive a network of connections that excludes some persons, i.e. some people may be unreachable. If your program detects such a broken network, simply output the message "disjoint". Note that the time taken to pass the message from person A to person B is not necessarily the same as the time taken to pass it from B to A, if such transmission is possible at all.
样例输入
3 2 2 4 3 5 2 1 2 3 6 2 1 2 2 2 5 3 4 4 2 8 5 3 1 5 8 4 1 6 4 10 2 7 5 2 0 2 2 5 1 5 0
样例输出
3 2 3 10
求某点连通全图所需的最小时间
确定这个点,并输出最小时间
用Floyd
1 #include <stdio.h> 2 #include <string.h> 3 #include <algorithm> 4 using namespace std; 5 const int inf=1<<29; 6 const int N=1100; 7 int u,v,m,n; 8 int w[N][N]; 9 int main() 10 { 11 while(scanf("%d",&n)!=EOF&&n) 12 { 13 for(int i=1; i<=n; i++) 14 { 15 for(int j=1; j<=n; j++) 16 { 17 w[i][j]=inf; 18 } 19 } 20 int tmp; 21 for(int i=1; i<=n; i++) 22 { 23 scanf("%d",&m); 24 for(int j=1; j<=m; j++) 25 { 26 scanf("%d%d",&v,&tmp);//要先定义一个变量存权值 27 w[i][v] = tmp;//再把权值付给w[i][v],否则会出错! 28 } 29 } 30 for(int k=1;k<=n;k++) 31 { 32 for(int i=1;i<=n;i++) 33 { 34 for(int j=1;j<=n;j++) 35 { 36 if(k!=i&&k!=j&&w[i][k]!=inf&&w[k][j]!=inf) 37 { 38 w[i][j]=min(w[i][j],w[i][k]+w[k][j]); 39 } 40 } 41 } 42 } 43 int ma,mi=inf,x; 44 for(int i=1;i<=n;i++) 45 { 46 ma=-inf; 47 for(int j=1;j<=n;j++) 48 { 49 if(j==i) 50 continue; 51 if(w[i][j]>ma)//找出每一行间的最大花费时间,因为每个点是可以同时向其他多个点进行连通的 52 { 53 ma=w[i][j]; 54 } 55 } 56 if(ma<mi) 57 { 58 mi=ma;//找出各行之间最小花费时间,即为最小值 59 x=i; 60 } 61 } 62 if(mi==inf)//存在断点,不能够接通 63 printf("disjoint\n"); 64 else 65 printf("%d %d\n",x,mi); 66 } 67 return 0; 68 }