Exchange Version and UpdateRollups

Exchange Server 2010

Product name	Build number	Date	KB
Microsoft Exchange Server 2010 RTM	14.0.639.21	11/9/2009
Update Rollup 1 for Exchange Server 2010	14.0.682.1	12/9/2009	KB976573
Update Rollup 2 for Exchange Server 2010	14.0.689.0	3/4/2010	KB979611
Update Rollup 3 for Exchange Server 2010	14.0.694.0	4/9/2010	KB981401
Update Rollup 4 for Exchange Server 2010	14.0.702.1	6/17/2010	KB982639
Update Rollup 5 for Exchange Server 2010	14.0.726.0	12/13/2010	KB2407113

Exchange Server 2010 Service Pack 1

Product name	Build number	Date	KB
Microsoft Exchange Server 2010 SP1	14.1.218.15	8/24/2010
Update Rollup 1 for Exchange Server 2010 SP1	14.1.255.2	10/4/2010	KB2407028
Update Rollup 2 for Exchange Server 2010 SP1	14.1.270.1	12/9/2010	KB2425179
Update Rollup 3 for Exchange Server 2010 SP1	14.1.289.3	3/7/2011	KB2492690
Update Rollup 3-v3 for Exchange Server 2010 SP1	14.1.289.7	4/1/2011	KB2529939
Update Rollup 4 for Exchange Server 2010 SP1	14.1.323.1	6/22/2011	KB2509910
Update Rollup 4-v2 for Exchange Server 2010 SP1	14.1.323.6	7/27/2011	KB2579150
Update Rollup 5 for Exchange Server 2010 SP1	14.1.339.1	8/23/2011	KB2582113
Update Rollup 6 for Exchange Server 2010 SP1	14.1.355.2	10/27/2011	KB2608646
Update Rollup 7 for Exchange Server 2010 SP1	14.1.421.0	8/13/2012	KB2743248
Update Rollup 7-v2 for Exchange Server 2010 SP1	14.1.421.2	10/9/2012	KB2756496
Update Rollup 7-v3 for Exchange Server 2010 SP1	14.1.421.3	11/12/2012	KB2778158
Update Rollup 8 for Exchange Server 2010 SP1	14.1.438.0	12/10/2012	KB2787763

Exchange Server 2010 Service Pack 2

Product name	Build number	Date	KB
Microsoft Exchange Server 2010 SP2	14.2.247.5	12/4/2011
Update Rollup 1 for Exchange Server 2010 SP2	14.2.283.3	2/13/2012	KB2645995
Update Rollup 2 for Exchange Server 2010 SP2	14.2.298.4	4/16/2012	KB2661854
Update Rollup 3 for Exchange Server 2010 SP2	14.2.309.2	5/29/2012	KB2685289
Update Rollup 4 for Exchange Server 2010 SP2	14.2.318.2	8/13/2012	KB2706690
Update Rollup 4-v2 for Exchange Server 2010 SP2	14.2.318.4	10/9/2012	KB2756485
Update Rollup 5 for Exchange Server 2010 SP2	14.2.328.5	11/13/2012	KB2719800
Update Rollup 5-v2 for Exchange Server 2010 SP2	14.2.328.10	12/10/2012	KB2785908
Update Rollup 6 for Exchange Server 2010 SP2	14.2.342.3	2/11/2013	KB2746164
Update Rollup 7 for Exchange Server 2010 SP2	14.2.375.0	8/13/2013	KB2874216
Update Rollup 8 for Exchange Server 2010 SP2	14.2.390.3	12/10/2013	KB2903903

Exchange Server 2010 Service Pack 3

Product name	Build number	Date	KB
Microsoft Exchange Server 2010 SP3	14.3.123.4	2/12/2013	KB2808208
Update Rollup 1 for Exchange Server 2010 SP3	14.3.146.0	5/29/2013	KB2803727
Update Rollup 2 for Exchange Server 2010 SP3	14.3.158.1	8/13/2013	KB2866475
Update Rollup 3 for Exchange Server 2010 SP3	14.3.169.1	11/25/2013	KB2891587
Update Rollup 4 for Exchange Server 2010 SP3	14.3.174.1	12/10/2013	KB2905616
Update Rollup 5 for Exchange Server 2010 SP3	14.3.181.6	2/25/2014	KB2917508
Update Rollup 6 for Exchange Server 2010 SP3	14.3.195.1	5/23/2014	KB2936871
Update Rollup 7 for Exchange Server 2010 SP3	14.3.210.2	8/26/2014	KB2961522
Update Rollup 8-v2 for Exchange Server 2010 SP3	14.3.224.2	12/12/2014	KB2986475
Update Rollup 9 for Exchange Server 2010 SP3	14.3.235.1	3/17/2015	KB3030085
Update Rollup 10 for Exchange Server 2010 SP3	14.3.248.2	6/16/2015	KB3049853
Update Rollup 11 for Exchange Server 2010 SP3	14.3.266.1	9/11/2015	KB3078674
Update Rollup 12 for Exchange Server 2010 SP3	14.3.279.2	12/10/2015	KB3096066
Update Rollup 13 for Exchange Server 2010 SP3	14.3.294.0	3/14/2016	KB3141339
Update Rollup 14 for Exchange Server 2010 SP3	14.3.301.0	6/15/2016	KB3151097
Update Rollup 15 for Exchange Server 2010 SP3	14.3.319.2	9/13/2016	KB3184728

Exchange Server 2013

Product name	Build number	Date	KB
Microsoft Exchange Server 2013 RTM	15.0.516.32	12/03/2012
Exchange Server 2013 Cumulative Update 1 (CU1)	15.0.620.29	04/02/2013	KB2816900
Exchange Server 2013 Cumulative Update 2 (CU2)	15.0.712.24	07/09/2013	KB2859928
Exchange Server 2013 Cumulative Update 3 (CU3)	15.0.775.38	11/25/2013	KB2892464
Exchange Server 2013 Service Pack 1 (SP1 aka CU4)	15.0.847.32	02/25/2014	KB2926248
Exchange Server 2013 Cumulative Update 5 (CU5)	15.0.913.22	05/27/2014	KB2936880
Exchange Server 2013 Cumulative Update 6 (CU6)	15.0.995.29	08/26/2014	KB2961810
Exchange Server 2013 Cumulative Update 7 (CU7)	15.0.1044.25	12/09/2014	KB2986485
Exchange Server 2013 Cumulative Update 8 (CU8)	15.0.1076.9	03/17/2015	KB3030080
Exchange Server 2013 Cumulative Update 9 (CU9)	15.0.1104.5	06/16/2015	KB3049849
Exchange Server 2013 Cumulative Update 10 (CU10)	15.0.1130.7	09/14/2015	KB3078678
Exchange Server 2013 Cumulative Update 11 (CU11)	15.0.1156.6	12/10/2015	KB3099522
Exchange Server 2013 Cumulative Update 12 (CU12)	15.0.1178.4	3/14/2016	KB3108023
Exchange Server 2013 Cumulative Update 13 (CU13)	15.0.1210.3	6/20/2016	KB3135743
Exchange Server 2013 Cumulative Update 14 (CU14)	15.0.1236.3	9/20/2016	KB3177670
Exchange Server 2013 Cumulative Update 15 (CU15)	15.0.1263.5	12/13/2016	KB3197044
Exchange Server 2013 Cumulative Update 16 (CU16)	15.0.1293.2	3/21/2017	KB4012112
Exchange Server 2013 Cumulative Update 17 (CU17)	15.0.1320.4	6/27/2017	KB4012114

Exchange Server 2016

Product name	Build number	Date	KB
Exchange Server 2016 Preview	15.1.225.16	6/22/2015
Exchange Server 2016 RTM	15.1.225.42	10/01/2015
Exchange Server 2016 Cumulative Update 1 (CU1)	15.1.396.30	3/14/2016	KB3134844
Exchange Server 2016 Cumulative Update 2 (CU2)	15.1.466.34	6/20/2016	KB3135742
Exchange Server 2016 Cumulative Update 3 (CU3)	15.1.544.27	9/20/2016	KB3152589
Exchange Server 2016 Cumulative Update 4 (CU4)	15.1.669.32	12/13/2016	KB3177106
Exchange Server 2016 Cumulative Update 5 (CU5)	15.1.845.34	3/21/2017	KB4012106
Exchange Server 2016 Cumulative Update 6 (CU6)	15.1.1034.26	6/27/2017	KB4012108

Build number can be checked using Get-ExchangeServer cmdlet

Get-ExchangeServer | Select Name, AdminDisplayVersion

Build number can be checked from ExSetup.exe file version information also

Get-Command Exsetup.exe | ForEach{$_.FileVersionInfo}

The below command will be give detailed information about name, domain, edition, fqdn, server roles installed, site & admin display name.

Get-ExchangeServer | fl name, domain, edition, fqdn, serverrole, site, admindisplayversion

To check ExSetup.exe file version information on all Exchange servers remotely, use below command.

Get-ExchangeServer | Sort-Object Name | ForEach{ Invoke-Command -ComputerName $_.Name -ScriptBlock { Get-Command ExSetup.exe | ForEach{$_.FileVersionInfo } } } | Format-Table -Auto

In Exchange 2013 and Exchange 2016 you can also check build numbers in Exchange Admin Center (EAC).
In EAC click on "servers" category on the left side and then click on "servers" pane.

Exchange Server and Update Rollups Build Numbers

Exchange Server 2013 and 2016 Build Numbers (with Cumulative Updates)

Exchange两种服务器版本：标准版和企业版。

企业版可支持每台服务器处理 100 个数据库；

标准版被限制在每台服务器处理 5 个数据库。

這些都是由【產品金鑰所定義的】授權版本。

當您輸入【有效的授權產品金鑰】時，便會【建立伺服器的支援版本】。

產品金鑰只能【用於相同版本金鑰的交換和升級，不能用於降級】。

您可以使用有效的產品金鑰

從 Exchange Server 2010 評估版 (試用版) 升級為 Standard Edition 或 Enterprise Edition。
從 Standard Edition 升級為 Enterprise Edition。
再授權一次伺服器。不需要重新安裝或重新設定任何項目，即可進行這些動作。在您輸入產品金鑰並重新啟動 Microsoft Exchange Information Store 服務之後，將會反映出對應於該產品金鑰的版本。
無法使用產品金鑰從 Enterprise Edition 降級為 Standard Edition，也不能用它們還原成試用版。

要進行這種類型的降級，只能解除安裝 Exchange 2010、重新安裝 Exchange 2010，並輸入正確的產品金鑰。

Get-ExchangeUpdateRollups

代码参考至：http://www.bhargavs.com/。

  1 #############################################################################
  2 # Get-ExchangeUpdateRollups.ps1
  3 # Gets the Exchange Server 2007, Exchange 2010 and Exchange 2013 Update Rollups
  4 # installed writes output to CSV file in same folder where script is called from
  5 #
  6 # Exchange 2013 CU Build Numbers - http://social.technet.microsoft.com/wiki/contents/articles/15776.exchange-server-2013-and-cumulative-updates-cus-build-numbers.aspx
  7 # Exchange Server Update Rollups and Build Numbers - http://social.technet.microsoft.com/wiki/contents/articles/240.exchange-server-and-update-rollups-build-numbers.aspx
  8 #
  9 # This script won't report RUs for Exchange Server 2013 since it uses Cummulative Updates (CU).
 10 # More details on Exchange Team Blog: Servicing Exchange 2013
 11 # http://blogs.technet.com/b/exchange/archive/2013/02/08/servicing-exchange-2013.aspx
 12 #
 13 # Created by 
 14 # Bhargav Shukla
 15 # http://www.bhargavs.com
 16 # 
 17 # DISCLAIMER
 18 # ==========
 19 # THIS CODE IS MADE AVAILABLE AS IS, WITHOUT WARRANTY OF ANY KIND. THE ENTIRE 
 20 # RISK OF THE USE OR THE RESULTS FROM THE USE OF THIS CODE REMAINS WITH THE USER.
 21 #############################################################################
 22 
 23 # Store header in variable
 24 $headerLine = 
 25 @"
 26 Exchange 2013 CU Build Numbers - http://social.technet.microsoft.com/wiki/contents/articles/15776.exchange-server-2013-and-cumulative-updates-cus-build-numbers.aspx
 27 Exchange Server Update Rollups and Build Numbers - http://social.technet.microsoft.com/wiki/contents/articles/240.exchange-server-and-update-rollups-build-numbers.aspx
 28 
 29 Server Name,Rollup Update Description,Installed Date,ExSetup File Version
 30 "@
 31 
 32 # Write header to file
 33 $headerLine | Out-File .\results.csv -Encoding ASCII -Append
 34 
 35 function getRU([string]$Server)
 36 {
 37 # Set server to connect to
 38     $Server = $Server.ToUpper()
 39 
 40 # Check if server is running Exchange 2007, Exchange 2010 or Exchange 2013
 41 
 42     $ExchVer = (Get-ExchangeServer $Server | ForEach {$_.AdminDisplayVersion})
 43 
 44 # Set appropriate base path to read Registry
 45 # Exit function if server is not running Exchange 2007, Exchange 2010 or Exchange 2013
 46     if ($ExchVer -match "Version 15")
 47     {
 48         $REG_KEY = "SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Installer\\UserData\\S-1-5-18\\Products\\AE1D439464EB1B8488741FFA028E291C\\Patches"
 49         $Reg_ExSetup = "SOFTWARE\\Microsoft\\ExchangeServer\\v15\\Setup"
 50     }
 51     elseif ($ExchVer -match "Version 14")
 52     {
 53         $REG_KEY = "SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Installer\\UserData\\S-1-5-18\\Products\\AE1D439464EB1B8488741FFA028E291C\\Patches"
 54         $Reg_ExSetup = "SOFTWARE\\Microsoft\\ExchangeServer\\v14\\Setup"
 55     }
 56     elseif    ($ExchVer -match "Version 8")
 57     {
 58         $REG_KEY = "SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Installer\\UserData\\S-1-5-18\\Products\\461C2B4266EDEF444B864AD6D9E5B613\\Patches"
 59         $Reg_ExSetup = "SOFTWARE\\Microsoft\\Exchange\\Setup"
 60     }
 61     else
 62     {
 63         return
 64     }
 65 
 66 # Read Rollup Update information from servers
 67 # Set Registry constants
 68     $VALUE1 = "DisplayName"
 69     $VALUE2 = "Installed"
 70     $VALUE3 = "MsiInstallPath"
 71 
 72 # Open remote registry
 73     $reg = [Microsoft.Win32.RegistryKey]::OpenRemoteBaseKey('LocalMachine', $Server)
 74 
 75 # Set regKey for MsiInstallPath
 76     $regKey= $reg.OpenSubKey($REG_ExSetup)
 77 
 78 # Get Install Path from Registry and replace : with $
 79     $installPath = ($regkey.getvalue($VALUE3) | foreach {$_ -replace (":","`$")})
 80 
 81 # Set ExSetup.exe path
 82     $binFile = "Bin\ExSetup.exe"
 83 
 84 # Get ExSetup.exe file version
 85     $exSetupVer = ((Get-Command "\\$Server\$installPath$binFile").FileVersionInfo | ForEach {$_.FileVersion})
 86 
 87 # Create an array of patch subkeys
 88     $regKey= $reg.OpenSubKey($REG_KEY).GetSubKeyNames() | ForEach {"$Reg_Key\\$_"}
 89 
 90 # Walk through patch subkeys and store Rollup Update Description and Installed Date in array variables
 91     $dispName = [array] ($regkey | %{$reg.OpenSubKey($_).getvalue($VALUE1)})
 92     $instDate = [array] ($regkey | %{$reg.OpenSubKey($_).getvalue($VALUE2)})
 93 
 94 # Loop Through array variables and output to a file
 95     $countmembers = 0
 96 
 97     if ($regkey -ne $null)
 98     {
 99         while ($countmembers -lt $dispName.Count)
100         {
101         $server+","+$dispName[$countmembers]+","+$instDate[$countmembers].substring(0,4)+"/"+$instDate[$countmembers].substring(4,2)+"/"+$instDate[$countmembers].substring(6,2)+","+$exsetupver | Out-File .\results.csv -Encoding ASCII -Append
102         $countmembers++
103         }
104     }
105     else
106     {
107         $server+",No Rollup Updates are installed,,"+$exsetupver | Out-File .\results.csv -Encoding ASCII -Append
108     }
109 }
110 
111 # Get Exchange 2007/2010 servers and write Rollup Updates to results file
112 $Servers = (Get-ExchangeServer -Identity WENDY* | Where-Object {($_.AdminDisplayVersion -match "Version 8" -OR $_.AdminDisplayVersion -match "Version 14" -OR $_.AdminDisplayVersion -match "Version 15") -AND $_.ServerRole -ne "ProvisionedServer" -and $_.ServerRole -ne "Edge"} | ForEach {$_.Name})
113 $Servers | ForEach {getRU $_}
114 Write-Output "Results are stored in $(Get-Location)\results.csv"

View Code

posted @ 2017-06-21 14:33 寻香径阅读(356) 评论(0) 编辑收藏举报

刷新页面返回顶部

The Scented Path

书山有路勤为径，学海无涯苦作舟~

Exchange Version and UpdateRollups

公告