kubernetes高可用集群安装（二进制安装、v1.20.2版）
1. 前言
之前文章安装 kubernetes 集群，都是使用 kubeadm 安装，然鹅很多公司也采用二进制方式搭建集群。这篇文章主要讲解，如何采用二进制包来搭建完整的高可用集群。相比使用 kubeadm 搭建，二进制搭建要繁琐很多，需要自己配置签名证书，每个组件都需要一步步配置安装。
本文以2021年1月14日官方更新的最新版 v1.20.2 来介绍。
2. 环境准备
2.1 机器规划
| IP地址 | 机器名称 | 机器配置 | 操作系统 | 机器角色 | 安装软件 |
|---|---|---|---|---|---|
| 172.10.1.11 | master1 | 2C4G | CentOS7.6 | master | kube-apiserver、kube-controller-manager、kube-scheduler、etcd |
| 172.10.1.12 | msater2 | 2C4G | CentOS7.6 | master | kube-apiserver、kube-controller-manager、kube-scheduler、etcd |
| 172.10.1.13 | master3 | 2C4G | CentOS7.6 | master | kube-apiserver、kube-controller-manager、kube-scheduler、etcd |
| 172.10.1.14 | node1 | 2C4G | CentOS7.6 | worker | kubelet、kube-proxy |
| 172.10.1.15 | node2 | 2C4G | CentOS7.6 | worker | kubelet、kube-proxy |
| 172.10.1.16 | node2 | 2C4G | CentOS7.6 | worker | kubelet、kube-proxy |
| 172.10.0.20 | / | / | / | 负载均衡VIP | / |
注：此处VIP是采用的云厂商的SLB，你也可以使用haproxy + keepalived的方式实现。
2.2 软件版本
| 软件 | 版本 |
|---|---|
| kube-apiserver、kube-controller-manager、kube-scheduler、kubelet、kube-proxy | v1.20.2 |
| kube-apiserver、kube-controller-manager、kube-scheduler、kubelet、kube-proxy | v1.20.2 |
| etcd | v3.4.13 |
| calico | v3.14 |
| coredns | 1.7.0 |
3. 搭建集群
3.1 机器基本配置
以下配置在6台机器上面操作
3.1.1 修改主机名
修改主机名称：master1、master2、master3、node1、node2、node3
3.1.2 配置hosts文件
修改机器的/etc/hosts文件
cat >> /etc/hosts << EOF
172.10.1.11 master1
172.10.1.12 master2
172.10.1.13 master3
172.10.1.14 node1
172.10.1.15 node2
172.10.1.16 node3
EOF
3.1.3 关闭防火墙和selinux
systemctl stop firewalld
setenforce 0
sed -i 's/^SELINUX=.\*/SELINUX=disabled/' /etc/selinux/config
3.1.4 关闭交换分区
swapoff -a
永久关闭，修改/etc/fstab,注释掉swap一行
3.1.5 时间同步
yum install -y chrony
systemctl start chronyd
systemctl enable chronyd
chronyc sources
3.1.6 修改内核参数
cat > /etc/sysctl.d/k8s.conf << EOF
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
sysctl --system
3.1.7 加载ipvs模块
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack_ipv4
lsmod | grep ip_vs
lsmod | grep nf_conntrack_ipv4
yum install -y ipvsadm
3.2 配置工作目录
每台机器都需要配置证书文件、组件的配置文件、组件的服务启动文件，现专门选择 master1 来统一生成这些文件，然后再分发到其他机器。以下操作在 master1 上进行
[root@master1 ~]# mkdir -p /data/work
注：该目录为配置文件和证书文件生成目录，后面的所有文件生成相关操作均在此目录下进行
[root@master1 ~]# ssh-keygen -t rsa -b 2048
将秘钥分发到另外五台机器，让 master1 可以免密码登录其他机器
3.3 搭建etcd集群
3.3.1 配置etcd工作目录
[root@master1 ~]# mkdir -p /etc/etcd # 配置文件存放目录
[root@master1 ~]# mkdir -p /etc/etcd/ssl # 证书文件存放目录
3.3.2 创建etcd证书
工具下载
[root@master1 work]# cd /data/work/
[root@master1 work]# wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64
[root@master1 work]# wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
[root@master1 work]# wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64
工具配置
[root@master1 work]# chmod +x cfssl*
[root@master1 work]# mv cfssl_linux-amd64 /usr/local/bin/cfssl
[root@master1 work]# mv cfssljson_linux-amd64 /usr/local/bin/cfssljson
[root@master1 work]# mv cfssl-certinfo_linux-amd64 /usr/local/bin/cfssl-certinfo
配置ca请求文件
[root@master1 work]# vim ca-csr.json
{
"CN": "kubernetes",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Hubei",
"L": "Wuhan",
"O": "k8s",
"OU": "system"
}
],
"ca": {
"expiry": "87600h"
}
}
注：
CN：Common Name，kube-apiserver 从证书中提取该字段作为请求的用户名 (User Name)；浏览器使用该字段验证网站是否合法；
O：Organization，kube-apiserver 从证书中提取该字段作为请求用户所属的组 (Group)
创建ca证书
[root@master1 work]# cfssl gencert -initca ca-csr.json | cfssljson -bare ca
配置ca证书策略
[root@master1 work]# vim ca-config.json
{
"signing": {
"default": {
"expiry": "87600h"
},
"profiles": {
"kubernetes": {
"usages": [
"signing",
"key encipherment",
"server auth",
"client auth"
],
"expiry": "87600h"
}
}
}
}
配置etcd请求csr文件
[root@master1 work]# vim etcd-csr.json
{
"CN": "etcd",
"hosts": [
"127.0.0.1",
"172.10.1.11",
"172.10.1.12",
"172.10.1.13"
],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [{
"C": "CN",
"ST": "Hubei",
"L": "Wuhan",
"O": "k8s",
"OU": "system"
}]
}
生成证书
[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes etcd-csr.json | cfssljson -bare etcd
[root@master1 work]# ls etcd*.pem
etcd-key.pem etcd.pem
3.3.3 部署etcd集群
下载etcd软件包
[root@master1 work]# wget https://github.com/etcd-io/etcd/releases/download/v3.4.13/etcd-v3.4.13-linux-amd64.tar.gz
[root@master1 work]# tar -xf etcd-v3.4.13-linux-amd64.tar.gz
[root@master1 work]# cp -p etcd-v3.4.13-linux-amd64/etcd* /usr/local/bin/
[root@master1 work]# rsync -vaz etcd-v3.4.13-linux-amd64/etcd* master2:/usr/local/bin/
[root@master1 work]# rsync -vaz etcd-v3.4.13-linux-amd64/etcd* master3:/usr/local/bin/
创建配置文件
[root@master1 work]# vim etcd.conf
#[Member]
ETCD_NAME="etcd1"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://172.10.1.11:2380"
ETCD_LISTEN_CLIENT_URLS="https://172.10.1.11:2379,http://127.0.0.1:2379"
#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://172.10.1.11:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://172.10.1.11:2379"
ETCD_INITIAL_CLUSTER="etcd1=https://172.10.1.11:2380,etcd2=https://172.10.1.12:2380,etcd3=https://172.10.1.13:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"
注：
ETCD_NAME：节点名称，集群中唯一
ETCD_DATA_DIR：数据目录
ETCD_LISTEN_PEER_URLS：集群通信监听地址
ETCD_LISTEN_CLIENT_URLS：客户端访问监听地址
ETCD_INITIAL_ADVERTISE_PEER_URLS：集群通告地址
ETCD_ADVERTISE_CLIENT_URLS：客户端通告地址
ETCD_INITIAL_CLUSTER：集群节点地址
ETCD_INITIAL_CLUSTER_TOKEN：集群Token
ETCD_INITIAL_CLUSTER_STATE：加入集群的当前状态，new是新集群，existing表示加入已有集群
创建启动服务文件
方式一：
有配置文件的启动
[root@master1 work]# vim etcd.service
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
[Service]
Type=notify
EnvironmentFile=-/etc/etcd/etcd.conf
WorkingDirectory=/var/lib/etcd/
ExecStart=/usr/local/bin/etcd \
--cert-file=/etc/etcd/ssl/etcd.pem \
--key-file=/etc/etcd/ssl/etcd-key.pem \
--trusted-ca-file=/etc/etcd/ssl/ca.pem \
--peer-cert-file=/etc/etcd/ssl/etcd.pem \
--peer-key-file=/etc/etcd/ssl/etcd-key.pem \
--peer-trusted-ca-file=/etc/etcd/ssl/ca.pem \
--peer-client-cert-auth \
--client-cert-auth
Restart=on-failure
RestartSec=5
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
方式二：
无配置文件的启动方式
[root@master1 work]# vim etcd.service
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
[Service]
Type=notify
WorkingDirectory=/var/lib/etcd/
ExecStart=/usr/local/bin/etcd \
--name=etcd1 \
--data-dir=/var/lib/etcd/default.etcd \
--cert-file=/etc/etcd/ssl/etcd.pem \
--key-file=/etc/etcd/ssl/etcd-key.pem \
--trusted-ca-file=/etc/etcd/ssl/ca.pem \
--peer-cert-file=/etc/etcd/ssl/etcd.pem \
--peer-key-file=/etc/etcd/ssl/etcd-key.pem \
--peer-trusted-ca-file=/etc/etcd/ssl/ca.pem \
--peer-client-cert-auth \
--client-cert-auth \
--listen-peer-urls=https://172.10.1.11:2380 \
--listen-client-urls=https://172.10.1.11:2379,http://127.0.0.1:2379 \
--advertise-client-urls=https://172.10.1.11:2379 \
--initial-advertise-peer-urls=https://172.10.1.11:2380 \
--initial-cluster=etcd1=https://172.10.1.11:2380,etcd2=https://172.10.1.12:2380,etcd3=https://172.10.1.13:2380 \
--initial-cluster-token=etcd-cluster \
--initial-cluster-state=new
Restart=on-failure
RestartSec=5
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
注：本文采用第一种方式
同步相关文件到各个节点
[root@master1 work]# cp ca*.pem /etc/etcd/ssl/
[root@master1 work]# cp etcd*.pem /etc/etcd/ssl/
[root@master1 work]# cp etcd.conf /etc/etcd/
[root@master1 work]# cp etcd.service /usr/lib/systemd/system/
[root@master1 work]# for i in master2 master3;do rsync -vaz etcd.conf $i:/etc/etcd/;done
[root@master1 work]# for i in master2 master3;do rsync -vaz etcd*.pem ca*.pem $i:/etc/etcd/ssl/;done
[root@master1 work]# for i in master2 master3;do rsync -vaz etcd.service $i:/usr/lib/systemd/system/;done
注：master2和master3分别修改配置文件中etcd名字和ip，并创建目录 /var/lib/etcd/default.etcd
启动etcd集群
[root@master1 work]# mkdir -p /var/lib/etcd/default.etcd
[root@master1 work]# systemctl daemon-reload
[root@master1 work]# systemctl enable etcd.service
[root@master1 work]# systemctl start etcd.service
[root@master1 work]# systemctl status etcd
注：第一次启动可能会卡一段时间，因为节点会等待其他节点启动
查看集群状态
[root@master1 work]# ETCDCTL_API=3 /usr/local/bin/etcdctl --write-out=table --cacert=/etc/etcd/ssl/ca.pem --cert=/etc/etcd/ssl/etcd.pem --key=/etc/etcd/ssl/etcd-key.pem --endpoints=https://172.10.1.11:2379,https://172.10.1.12:2379,https://172.10.1.13:2379 endpoint health
3.4 kubernetes组件部署
3.4.1 下载安装包
[root@master1 work]# wget https://dl.k8s.io/v1.20.1/kubernetes-server-linux-amd64.tar.gz
[root@master1 work]# tar -xf kubernetes-server-linux-amd64.tar
[root@master1 work]# cd kubernetes/server/bin/
[root@master1 bin]# cp kube-apiserver kube-controller-manager kube-scheduler kubectl /usr/local/bin/
[root@master1 bin]# rsync -vaz kube-apiserver kube-controller-manager kube-scheduler kubectl master2:/usr/local/bin/
[root@master1 bin]# rsync -vaz kube-apiserver kube-controller-manager kube-scheduler kubectl master3:/usr/local/bin/
[root@master1 bin]# for i in node1 node2 node3;do rsync -vaz kubelet kube-proxy $i:/usr/local/bin/;done
[root@master1 bin]# cd /data/work/
3.4.2 创建工作目录
[root@master1 work]# mkdir -p /etc/kubernetes/ # kubernetes组件配置文件存放目录
[root@master1 work]# mkdir -p /etc/kubernetes/ssl # kubernetes组件证书文件存放目录
[root@master1 work]# mkdir /var/log/kubernetes # kubernetes组件日志文件存放目录
3.4.3 部署api-server
创建csr请求文件
[root@master1 work]# vim kube-apiserver-csr.json
{
"CN": "kubernetes",
"hosts": [
"127.0.0.1",
"172.10.1.11",
"172.10.1.12",
"172.10.1.13",
"172.10.1.14",
"172.10.1.15",
"172.10.1.16",
"172.10.0.20",
"10.255.0.1",
"kubernetes",
"kubernetes.default",
"kubernetes.default.svc",
"kubernetes.default.svc.cluster",
"kubernetes.default.svc.cluster.local"
],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Hubei",
"L": "Wuhan",
"O": "k8s",
"OU": "system"
}
]
}
注：
如果 hosts 字段不为空则需要指定授权使用该证书的 IP 或域名列表。
由于该证书后续被 kubernetes master 集群使用，需要将master节点的IP都填上，同时还需要填写 service 网络的首个IP。(一般是 kube-apiserver 指定的 service-cluster-ip-range 网段的第一个IP，如 10.254.0.1)
生成证书和token文件
[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-apiserver-csr.json | cfssljson -bare kube-apiserver
[root@master1 work]# cat > token.csv << EOF
$(head -c 16 /dev/urandom | od -An -t x | tr -d ' '),kubelet-bootstrap,10001,"system:kubelet-bootstrap"
EOF
创建配置文件
[root@master1 work]# vim kube-apiserver.conf
KUBE_APISERVER_OPTS="--enable-admission-plugins=NamespaceLifecycle,NodeRestriction,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota \
--anonymous-auth=false \
--bind-address=172.10.1.11 \
--secure-port=6443 \
--advertise-address=172.10.1.11 \
--insecure-port=0 \
--authorization-mode=Node,RBAC \
--runtime-config=api/all=true \
--enable-bootstrap-token-auth \
--service-cluster-ip-range=10.255.0.0/16 \
--token-auth-file=/etc/kubernetes/token.csv \
--service-node-port-range=30000-50000 \
--tls-cert-file=/etc/kubernetes/ssl/kube-apiserver.pem \
--tls-private-key-file=/etc/kubernetes/ssl/kube-apiserver-key.pem \
--client-ca-file=/etc/kubernetes/ssl/ca.pem \
--kubelet-client-certificate=/etc/kubernetes/ssl/kube-apiserver.pem \
--kubelet-client-key=/etc/kubernetes/ssl/kube-apiserver-key.pem \
--service-account-key-file=/etc/kubernetes/ssl/ca-key.pem \
--service-account-signing-key-file=/etc/kubernetes/ssl/ca-key.pem \ # 1.20以上版本必须有此参数
--service-account-issuer=https://kubernetes.default.svc.cluster.local \ # 1.20以上版本必须有此参数
--etcd-cafile=/etc/etcd/ssl/ca.pem \
--etcd-certfile=/etc/etcd/ssl/etcd.pem \
--etcd-keyfile=/etc/etcd/ssl/etcd-key.pem \
--etcd-servers=https://172.10.1.11:2379,https://172.10.1.12:2379,https://172.10.1.13:2379 \
--enable-swagger-ui=true \
--allow-privileged=true \
--apiserver-count=3 \
--audit-log-maxage=30 \
--audit-log-maxbackup=3 \
--audit-log-maxsize=100 \
--audit-log-path=/var/log/kube-apiserver-audit.log \
--event-ttl=1h \
--alsologtostderr=true \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--v=4"
注：
--logtostderr：启用日志
--v：日志等级
--log-dir：日志目录
--etcd-servers：etcd集群地址
--bind-address：监听地址
--secure-port：https安全端口
--advertise-address：集群通告地址
--allow-privileged：启用授权
--service-cluster-ip-range：Service虚拟IP地址段
--enable-admission-plugins：准入控制模块
--authorization-mode：认证授权，启用RBAC授权和节点自管理
--enable-bootstrap-token-auth：启用TLS bootstrap机制
--token-auth-file：bootstrap token文件
--service-node-port-range：Service nodeport类型默认分配端口范围
--kubelet-client-xxx：apiserver访问kubelet客户端证书
--tls-xxx-file：apiserver https证书
--etcd-xxxfile：连接Etcd集群证书
--audit-log-xxx：审计日志
创建服务启动文件
[root@master1 work]# vim kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=etcd.service
Wants=etcd.service
[Service]
EnvironmentFile=-/etc/kubernetes/kube-apiserver.conf
ExecStart=/usr/local/bin/kube-apiserver $KUBE_APISERVER_OPTS
Restart=on-failure
RestartSec=5
Type=notify
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
同步相关文件到各个节点
[root@master1 work]# cp ca*.pem /etc/kubernetes/ssl/
[root@master1 work]# cp kube-apiserver*.pem /etc/kubernetes/ssl/
[root@master1 work]# cp token.csv /etc/kubernetes/
[root@master1 work]# cp kube-apiserver.conf /etc/kubernetes/
[root@master1 work]# cp kube-apiserver.service /usr/lib/systemd/system/
[root@master1 work]# rsync -vaz token.csv master2:/etc/kubernetes/
[root@master1 work]# rsync -vaz token.csv master3:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-apiserver*.pem master2:/etc/kubernetes/ssl/ # 主要rsync同步文件，只能创建最后一级目录，如果ssl目录不存在会自动创建，但是上一级目录kubernetes必须存在
[root@master1 work]# rsync -vaz kube-apiserver*.pem master3:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz ca*.pem master2:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz ca*.pem master3:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz kube-apiserver.conf master2:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-apiserver.conf master3:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-apiserver.service master2:/usr/lib/systemd/system/
[root@master1 work]# rsync -vaz kube-apiserver.service master3:/usr/lib/systemd/system/
注：master2和master3配置文件的IP地址修改为实际的本机IP
启动服务
[root@master1 work]# systemctl daemon-reload
[root@master1 work]# systemctl enable kube-apiserver
[root@master1 work]# systemctl start kube-apiserver
[root@master1 work]# systemctl status kube-apiserver
测试
[root@master1 work]# curl --insecure https://172.10.1.11:6443/
有返回说明启动正常
3.4.4 部署kubectl
创建csr请求文件
[root@master1 work]# vim admin-csr.json
{
"CN": "admin",
"hosts": [],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Hubei",
"L": "Wuhan",
"O": "system:masters",
"OU": "system"
}
]
}
说明：
后续 kube-apiserver 使用 RBAC 对客户端(如 kubelet、kube-proxy、Pod)请求进行授权；
kube-apiserver 预定义了一些 RBAC 使用的 RoleBindings，如 cluster-admin 将 Group system:masters 与 Role cluster-admin 绑定，该 Role 授予了调用kube-apiserver 的所有 API的权限；
O指定该证书的 Group 为 system:masters，kubelet 使用该证书访问 kube-apiserver 时 ，由于证书被 CA 签名，所以认证通过，同时由于证书用户组为经过预授权的 system:masters，所以被授予访问所有 API 的权限；
注：
这个admin 证书，是将来生成管理员用的kube config 配置文件用的，现在我们一般建议使用RBAC 来对kubernetes 进行角色权限控制， kubernetes 将证书中的CN 字段 作为User， O 字段作为 Group；
"O": "system:masters", 必须是system:masters，否则后面kubectl create clusterrolebinding报错。
生成证书
[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes admin-csr.json | cfssljson -bare admin
[root@master1 work]# cp admin*.pem /etc/kubernetes/ssl/
创建kubeconfig配置文件
kubeconfig 为 kubectl 的配置文件，包含访问 apiserver 的所有信息，如 apiserver 地址、CA 证书和自身使用的证书
设置集群参数
[root@master1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://172.10.0.20:6443 --kubeconfig=kube.config
设置客户端认证参数
[root@master1 work]# kubectl config set-credentials admin --client-certificate=admin.pem --client-key=admin-key.pem --embed-certs=true --kubeconfig=kube.config
设置上下文参数
[root@master1 work]# kubectl config set-context kubernetes --cluster=kubernetes --user=admin --kubeconfig=kube.config
设置默认上下文
[root@master1 work]# kubectl config use-context kubernetes --kubeconfig=kube.config
[root@master1 work]# mkdir ~/.kube
[root@master1 work]# cp kube.config ~/.kube/config
授权kubernetes证书访问kubelet api权限
[root@master1 work]# kubectl create clusterrolebinding kube-apiserver:kubelet-apis --clusterrole=system:kubelet-api-admin --user kubernetes
查看集群组件状态
上面步骤完成后，kubectl就可以与kube-apiserver通信了
[root@master1 work]# kubectl cluster-info
[root@master1 work]# kubectl get componentstatuses
[root@master1 work]# kubectl get all --all-namespaces
同步kubectl配置文件到其他节点
[root@master1 work]# rsync -vaz /root/.kube/config master2:/root/.kube/
[root@master1 work]# rsync -vaz /root/.kube/config master3:/root/.kube/
配置kubectl子命令补全
[root@master1 work]# yum install -y bash-completion
[root@master1 work]# source /usr/share/bash-completion/bash_completion
[root@master1 work]# source <(kubectl completion bash)
[root@master1 work]# kubectl completion bash > ~/.kube/completion.bash.inc
[root@master1 work]# source '/root/.kube/completion.bash.inc'
[root@master1 work]# source $HOME/.bash_profile
3.4.5 部署kube-controller-manager
创建csr请求文件
[root@master1 work]# vim kube-controller-manager-csr.json
{
"CN": "system:kube-controller-manager",
"key": {
"algo": "rsa",
"size": 2048
},
"hosts": [
"127.0.0.1",
"172.10.1.11",
"172.10.1.12",
"172.10.1.13"
],
"names": [
{
"C": "CN",
"ST": "Hubei",
"L": "Wuhan",
"O": "system:kube-controller-manager",
"OU": "system"
}
]
}
注：
hosts 列表包含所有 kube-controller-manager 节点 IP；
CN 为 system:kube-controller-manager、O 为 system:kube-controller-manager，kubernetes 内置的 ClusterRoleBindings system:kube-controller-manager 赋予 kube-controller-manager 工作所需的权限
生成证书
[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-controller-manager-csr.json | cfssljson -bare kube-controller-manager
[root@master1 work]# ls kube-controller-manager*.pem
创建kube-controller-manager的kubeconfig
设置集群参数
[root@master1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://172.10.0.20:6443 --kubeconfig=kube-controller-manager.kubeconfig
设置客户端认证参数
[root@master1 work]# kubectl config set-credentials system:kube-controller-manager --client-certificate=kube-controller-manager.pem --client-key=kube-controller-manager-key.pem --embed-certs=true --kubeconfig=kube-controller-manager.kubeconfig
设置上下文参数
[root@master1 work]# kubectl config set-context system:kube-controller-manager --cluster=kubernetes --user=system:kube-controller-manager --kubeconfig=kube-controller-manager.kubeconfig
设置默认上下文
[root@master1 work]# kubectl config use-context system:kube-controller-manager --kubeconfig=kube-controller-manager.kubeconfig
创建配置文件
[root@master1 work]# vim kube-controller-manager.conf
KUBE_CONTROLLER_MANAGER_OPTS="--port=0 \
--secure-port=10252 \
--bind-address=127.0.0.1 \
--kubeconfig=/etc/kubernetes/kube-controller-manager.kubeconfig \
--service-cluster-ip-range=10.255.0.0/16 \
--cluster-name=kubernetes \
--cluster-signing-cert-file=/etc/kubernetes/ssl/ca.pem \
--cluster-signing-key-file=/etc/kubernetes/ssl/ca-key.pem \
--allocate-node-cidrs=true \
--cluster-cidr=10.0.0.0/16 \
--experimental-cluster-signing-duration=87600h \
--root-ca-file=/etc/kubernetes/ssl/ca.pem \
--service-account-private-key-file=/etc/kubernetes/ssl/ca-key.pem \
--leader-elect=true \
--feature-gates=RotateKubeletServerCertificate=true \
--controllers=*,bootstrapsigner,tokencleaner \
--horizontal-pod-autoscaler-use-rest-clients=true \
--horizontal-pod-autoscaler-sync-period=10s \
--tls-cert-file=/etc/kubernetes/ssl/kube-controller-manager.pem \
--tls-private-key-file=/etc/kubernetes/ssl/kube-controller-manager-key.pem \
--use-service-account-credentials=true \
--alsologtostderr=true \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--v=2"
创建启动文件
[root@master1 work]# vim kube-controller-manager.service
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes
[Service]
EnvironmentFile=-/etc/kubernetes/kube-controller-manager.conf
ExecStart=/usr/local/bin/kube-controller-manager $KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure
RestartSec=5
[Install]
WantedBy=multi-user.target
同步相关文件到各个节点
[root@master1 work]# cp kube-controller-manager*.pem /etc/kubernetes/ssl/
[root@master1 work]# cp kube-controller-manager.kubeconfig /etc/kubernetes/
[root@master1 work]# cp kube-controller-manager.conf /etc/kubernetes/
[root@master1 work]# cp kube-controller-manager.service /usr/lib/systemd/system/
[root@master1 work]# rsync -vaz kube-controller-manager*.pem master2:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz kube-controller-manager*.pem master3:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz kube-controller-manager.kubeconfig kube-controller-manager.conf master2:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-controller-manager.kubeconfig kube-controller-manager.conf master3:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-controller-manager.service master2:/usr/lib/systemd/system/
[root@master1 work]# rsync -vaz kube-controller-manager.service master3:/usr/lib/systemd/system/
启动服务
[root@master1 work]# systemctl daemon-reload
[root@master1 work]# systemctl enable kube-controller-manager
[root@master1 work]# systemctl start kube-controller-manager
[root@master1 work]# systemctl status kube-controller-manager
3.4.6 部署kube-scheduler
创建csr请求文件
[root@master1 work]# vim kube-scheduler-csr.json
{
"CN": "system:kube-scheduler",
"hosts": [
"127.0.0.1",
"172.10.1.11",
"172.10.1.12",
"172.10.1.13"
],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Hubei",
"L": "Wuhan",
"O": "system:kube-scheduler",
"OU": "system"
}
]
}
注：
hosts 列表包含所有 kube-scheduler 节点 IP；
CN 为 system:kube-scheduler、O 为 system:kube-scheduler，kubernetes 内置的 ClusterRoleBindings system:kube-scheduler 将赋予 kube-scheduler 工作所需的权限。
生成证书
[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-scheduler-csr.json | cfssljson -bare kube-scheduler
[root@master1 work]# ls kube-scheduler*.pem
创建kube-scheduler的kubeconfig
设置集群参数
[root@master1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://172.10.0.20:6443 --kubeconfig=kube-scheduler.kubeconfig
设置客户端认证参数
[root@master1 work]# kubectl config set-credentials system:kube-scheduler --client-certificate=kube-scheduler.pem --client-key=kube-scheduler-key.pem --embed-certs=true --kubeconfig=kube-scheduler.kubeconfig
设置上下文参数
[root@master1 work]# kubectl config set-context system:kube-scheduler --cluster=kubernetes --user=system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig
设置默认上下文
[root@master1 work]# kubectl config use-context system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig
创建配置文件
[root@master1 work]# vim kube-scheduler.conf
KUBE_SCHEDULER_OPTS="--address=127.0.0.1 \
--kubeconfig=/etc/kubernetes/kube-scheduler.kubeconfig \
--leader-elect=true \
--alsologtostderr=true \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--v=2"
创建服务启动文件
[root@master1 work]# vim kube-scheduler.service
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes
[Service]
EnvironmentFile=-/etc/kubernetes/kube-scheduler.conf
ExecStart=/usr/local/bin/kube-scheduler $KUBE_SCHEDULER_OPTS
Restart=on-failure
RestartSec=5
[Install]
WantedBy=multi-user.target
同步相关文件到各个节点
[root@master1 work]# cp kube-scheduler*.pem /etc/kubernetes/ssl/
[root@master1 work]# cp kube-scheduler.kubeconfig /etc/kubernetes/
[root@master1 work]# cp kube-scheduler.conf /etc/kubernetes/
[root@master1 work]# cp kube-scheduler.service /usr/lib/systemd/system/
[root@master1 work]# rsync -vaz kube-scheduler*.pem master2:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz kube-scheduler*.pem master3:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz kube-scheduler.kubeconfig kube-scheduler.conf master2:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-scheduler.kubeconfig kube-scheduler.conf master3:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-scheduler.service master2:/usr/lib/systemd/system/
[root@master1 work]# rsync -vaz kube-scheduler.service master3:/usr/lib/systemd/system/
启动服务
[root@master1 work]# systemctl daemon-reload
[root@master1 work]# systemctl enable kube-scheduler
[root@master1 work]# systemctl start kube-scheduler
[root@master1 work]# systemctl status kube-scheduler
3.4.7 部署docker
在三个work节点上安装
安装docker
[root@node1 ~]# wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo -O /etc/yum.repos.d/docker-ce.repo
[root@node1 ~]# yum install -y docker-ce
[root@node1 ~]# systemctl enable docker
[root@node1 ~]# systemctl start docker
[root@node1 ~]# docker --version
修改docker源和驱动
[root@node1 ~]# cat > /etc/docker/daemon.json << EOF
{
"exec-opts": ["native.cgroupdriver=systemd"],
"registry-mirrors": [
"https://1nj0zren.mirror.aliyuncs.com",
"https://kfwkfulq.mirror.aliyuncs.com",
"https://2lqq34jg.mirror.aliyuncs.com",
"https://pee6w651.mirror.aliyuncs.com",
"http://hub-mirror.c.163.com",
"https://docker.mirrors.ustc.edu.cn",
"http://f1361db2.m.daocloud.io",
"https://registry.docker-cn.com"
]
}
EOF
[root@node1 ~]# systemctl restart docker
[root@node1 ~]# docker info | grep "Cgroup Driver"
下载依赖镜像
[root@node1 ~]# docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.2
[root@node1 ~]# docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.2 k8s.gcr.io/pause:3.2
[root@node1 ~]# docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.2
[root@node1 ~]# docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:1.7.0
[root@node1 ~]# docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:1.7.0 k8s.gcr.io/coredns:1.7.0
[root@node1 ~]# docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:1.7.0
3.4.8 部署kubelet
以下操作在master1上操作
创建kubelet-bootstrap.kubeconfig
[root@master1 work]# BOOTSTRAP_TOKEN=$(awk -F "," '{print $1}' /etc/kubernetes/token.csv)
设置集群参数
[root@master1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://172.10.0.20:6443 --kubeconfig=kubelet-bootstrap.kubeconfig
设置客户端认证参数
[root@master1 work]# kubectl config set-credentials kubelet-bootstrap --token=${BOOTSTRAP_TOKEN} --kubeconfig=kubelet-bootstrap.kubeconfig
设置上下文参数
[root@master1 work]# kubectl config set-context default --cluster=kubernetes --user=kubelet-bootstrap --kubeconfig=kubelet-bootstrap.kubeconfig
设置默认上下文
[root@master1 work]# kubectl config use-context default --kubeconfig=kubelet-bootstrap.kubeconfig
创建角色绑定
[root@master1 work]# kubectl create clusterrolebinding kubelet-bootstrap --clusterrole=system:node-bootstrapper --user=kubelet-bootstrap
创建配置文件
[root@master1 work]# vim kubelet.json
{
"kind": "KubeletConfiguration",
"apiVersion": "kubelet.config.k8s.io/v1beta1",
"authentication": {
"x509": {
"clientCAFile": "/etc/kubernetes/ssl/ca.pem"
},
"webhook": {
"enabled": true,
"cacheTTL": "2m0s"
},
"anonymous": {
"enabled": false
}
},
"authorization": {
"mode": "Webhook",
"webhook": {
"cacheAuthorizedTTL": "5m0s",
"cacheUnauthorizedTTL": "30s"
}
},
"address": "172.10.1.14",
"port": 10250,
"readOnlyPort": 10255,
"cgroupDriver": "cgroupfs", # 如果docker的驱动为systemd，处修改为systemd。此处设置很重要，否则后面node节点无法加入到集群
"hairpinMode": "promiscuous-bridge",
"serializeImagePulls": false,
"featureGates": {
"RotateKubeletClientCertificate": true,
"RotateKubeletServerCertificate": true
},
"clusterDomain": "cluster.local.",
"clusterDNS": ["10.255.0.2"]
}
创建启动文件
[root@master1 work]# vim kubelet.service
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/kubernetes/kubernetes
After=docker.service
Requires=docker.service
[Service]
WorkingDirectory=/var/lib/kubelet
ExecStart=/usr/local/bin/kubelet \
--bootstrap-kubeconfig=/etc/kubernetes/kubelet-bootstrap.kubeconfig \
--cert-dir=/etc/kubernetes/ssl \
--kubeconfig=/etc/kubernetes/kubelet.kubeconfig \
--config=/etc/kubernetes/kubelet.json \
--network-plugin=cni \
--pod-infra-container-image=k8s.gcr.io/pause:3.2 \
--alsologtostderr=true \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--v=2
Restart=on-failure
RestartSec=5
[Install]
WantedBy=multi-user.target
注：
–hostname-override：显示名称，集群中唯一
–network-plugin：启用CNI
–kubeconfig：空路径，会自动生成，后面用于连接apiserver
–bootstrap-kubeconfig：首次启动向apiserver申请证书
–config：配置参数文件
–cert-dir：kubelet证书生成目录
–pod-infra-container-image：管理Pod网络容器的镜像
同步相关文件到各个节点
[root@master1 work]# cp kubelet-bootstrap.kubeconfig /etc/kubernetes/
[root@master1 work]# cp kubelet.json /etc/kubernetes/
[root@master1 work]# cp kubelet.service /usr/lib/systemd/system/
以上步骤，如果master节点不安装kubelet，则不用执行
[root@master1 work]# for i in node1 node2 node3;do rsync -vaz kubelet-bootstrap.kubeconfig kubelet.json $i:/etc/kubernetes/;done
[root@master1 work]# for i in node1 node2 node3;do rsync -vaz ca.pem $i:/etc/kubernetes/ssl/;done
[root@master1 work]# for i in node1 node2 node3;do rsync -vaz kubelet.service $i:/usr/lib/systemd/system/;done
注：kubelete.json配置文件address改为各个节点的ip地址
启动服务
各个work节点上操作
[root@node1 ~]# mkdir /var/lib/kubelet
[root@node1 ~]# mkdir /var/log/kubernetes
[root@node1 ~]# systemctl daemon-reload
[root@node1 ~]# systemctl enable kubelet
[root@node1 ~]# systemctl start kubelet
[root@node1 ~]# systemctl status kubelet
确认kubelet服务启动成功后，接着到master上Approve一下bootstrap请求。执行如下命令可以看到三个worker节点分别发送了三个 CSR 请求：
[root@master1 work]# kubectl get csr
[root@master1 work]# kubectl certificate approve node-csr-HlX3cExsZohWsu8Dd6Rp_ztFejmMdpzvti_qgxo4SAQ
[root@master1 work]# kubectl certificate approve node-csr-oykYfnH_coRF2PLJH4fOHlGznOZUBPDg5BPZXDo2wgk
[root@master1 work]# kubectl certificate approve node-csr-ytRB2fikhL6dykcekGg4BdD87o-zw9WPU44SZ1nFT50
[root@master1 work]# kubectl get csr
[root@master1 work]# kubectl get nodes
3.4.9 部署kube-proxy
创建csr请求文件
[root@master1 work]# vim kube-proxy-csr.json
{
"CN": "system:kube-proxy",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Hubei",
"L": "Wuhan",
"O": "k8s",
"OU": "system"
}
]
}
生成证书
[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy
[root@master1 work]# ls kube-proxy*.pem
创建kubeconfig文件
[root@master1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://172.10.0.20:6443 --kubeconfig=kube-proxy.kubeconfig
[root@master1 work]# kubectl config set-credentials kube-proxy --client-certificate=kube-proxy.pem --client-key=kube-proxy-key.pem --embed-certs=true --kubeconfig=kube-proxy.kubeconfig
[root@master1 work]# kubectl config set-context default --cluster=kubernetes --user=kube-proxy --kubeconfig=kube-proxy.kubeconfig
[root@master1 work]# kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig
创建kube-proxy配置文件
[root@master1 work]# vim kube-proxy.yaml
apiVersion: kubeproxy.config.k8s.io/v1alpha1
bindAddress: 172.10.1.14
clientConnection:
kubeconfig: /etc/kubernetes/kube-proxy.kubeconfig
clusterCIDR: 192.168.0.0/16 # 此处网段必须与网络组件网段保持一致，否则部署网络组件时会报错
healthzBindAddress: 172.10.1.14:10256
kind: KubeProxyConfiguration
metricsBindAddress: 172.10.1.14:10249
mode: "ipvs"
创建服务启动文件
[root@master1 work]# vim kube-proxy.service
[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
WorkingDirectory=/var/lib/kube-proxy
ExecStart=/usr/local/bin/kube-proxy \
--config=/etc/kubernetes/kube-proxy.yaml \
--alsologtostderr=true \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--v=2
Restart=on-failure
RestartSec=5
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
同步文件到各个节点
[root@master1 work]# cp kube-proxy*.pem /etc/kubernetes/ssl/
[root@master1 work]# cp kube-proxy.kubeconfig kube-proxy.yaml /etc/kubernetes/
[root@master1 work]# cp kube-proxy.service /usr/lib/systemd/system/
master节点不安装kube-proxy，则以上步骤不用执行
[root@master1 work]# for i in node1 node2 node3;do rsync -vaz kube-proxy.kubeconfig kube-proxy.yaml $i:/etc/kubernetes/;done
[root@master1 work]# for i in node1 node2 node3;do rsync -vaz kube-proxy.service $i:/usr/lib/systemd/system/;done
注：配置文件kube-proxy.yaml中address修改为各节点的实际IP
启动服务
[root@node1 ~]# mkdir -p /var/lib/kube-proxy
[root@node1 ~]# systemctl daemon-reload
[root@node1 ~]# systemctl enable kube-proxy
[root@node1 ~]# systemctl restart kube-proxy
[root@node1 ~]# systemctl status kube-proxy
3.4.10 配置网络组件
[root@master1 work]# wget https://docs.projectcalico.org/v3.14/manifests/calico.yaml
[root@master1 work]# kubectl apply -f calico.yaml
此时再来查看各个节点，均为Ready状态
[root@master1 work]# kubectl get pods -A
[root@master1 work]# kubectl get nodes
3.4.11 部署coredns
下载coredns yaml文件：https://raw.githubusercontent.com/coredns/deployment/master/kubernetes/coredns.yaml.sed
修改yaml文件:
kubernetes cluster.local in-addr.arpa ip6.arpa
forward . /etc/resolv.conf
clusterIP为：10.255.0.2（kubelet配置文件中的clusterDNS）
[root@master1 work]# cat coredns.yaml
apiVersion: v1
kind: ServiceAccount
metadata:
name: coredns
namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
labels:
kubernetes.io/bootstrapping: rbac-defaults
name: system:coredns
rules:
- apiGroups:
- ""
resources:
- endpoints
- services
- pods
- namespaces
verbs:
- list
- watch
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
annotations:
rbac.authorization.kubernetes.io/autoupdate: "true"
labels:
kubernetes.io/bootstrapping: rbac-defaults
name: system:coredns
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: system:coredns
subjects:
- kind: ServiceAccount
name: coredns
namespace: kube-system
---
apiVersion: v1
kind: ConfigMap
metadata:
name: coredns
namespace: kube-system
data:
Corefile: |
.:53 {
errors
health {
lameduck 5s
}
ready
kubernetes cluster.local in-addr.arpa ip6.arpa {
fallthrough in-addr.arpa ip6.arpa
}
prometheus :9153
forward . /etc/resolv.conf {
max_concurrent 1000
}
cache 30
loop
reload
loadbalance
}
---
apiVersion: apps/v1
kind: Deployment
metadata:
name: coredns
namespace: kube-system
labels:
k8s-app: kube-dns
kubernetes.io/name: "CoreDNS"
spec:
# replicas: not specified here:
# 1. Default is 1.
# 2. Will be tuned in real time if DNS horizontal auto-scaling is turned on.
strategy:
type: RollingUpdate
rollingUpdate:
maxUnavailable: 1
selector:
matchLabels:
k8s-app: kube-dns
template:
metadata:
labels:
k8s-app: kube-dns
spec:
priorityClassName: system-cluster-critical
serviceAccountName: coredns
tolerations:
- key: "CriticalAddonsOnly"
operator: "Exists"
nodeSelector:
kubernetes.io/os: linux
affinity:
podAntiAffinity:
preferredDuringSchedulingIgnoredDuringExecution:
- weight: 100
podAffinityTerm:
labelSelector:
matchExpressions:
- key: k8s-app
operator: In
values: ["kube-dns"]
topologyKey: kubernetes.io/hostname
containers:
- name: coredns
image: coredns/coredns:1.8.0
imagePullPolicy: IfNotPresent
resources:
limits:
memory: 170Mi
requests:
cpu: 100m
memory: 70Mi
args: [ "-conf", "/etc/coredns/Corefile" ]
volumeMounts:
- name: config-volume
mountPath: /etc/coredns
readOnly: true
ports:
- containerPort: 53
name: dns
protocol: UDP
- containerPort: 53
name: dns-tcp
protocol: TCP
- containerPort: 9153
name: metrics
protocol: TCP
securityContext:
allowPrivilegeEscalation: false
capabilities:
add:
- NET_BIND_SERVICE
drop:
- all
readOnlyRootFilesystem: true
livenessProbe:
httpGet:
path: /health
port: 8080
scheme: HTTP
initialDelaySeconds: 60
timeoutSeconds: 5
successThreshold: 1
failureThreshold: 5
readinessProbe:
httpGet:
path: /ready
port: 8181
scheme: HTTP
dnsPolicy: Default
volumes:
- name: config-volume
configMap:
name: coredns
items:
- key: Corefile
path: Corefile
---
apiVersion: v1
kind: Service
metadata:
name: kube-dns
namespace: kube-system
annotations:
prometheus.io/port: "9153"
prometheus.io/scrape: "true"
labels:
k8s-app: kube-dns
kubernetes.io/cluster-service: "true"
kubernetes.io/name: "CoreDNS"
spec:
selector:
k8s-app: kube-dns
clusterIP: 10.255.0.2
ports:
- name: dns
port: 53
protocol: UDP
- name: dns-tcp
port: 53
protocol: TCP
- name: metrics
port: 9153
protocol: TCP
[root@master1 work]# kubectl apply -f coredns.yaml
3.5 验证
3.5.1 部署nginx
[root@master1 ~]# vim nginx.yaml
---
apiVersion: v1
kind: ReplicationController
metadata:
name: nginx-controller
spec:
replicas: 2
selector:
name: nginx
template:
metadata:
labels:
name: nginx
spec:
containers:
- name: nginx
image: nginx:1.19.6
ports:
- containerPort: 80
---
apiVersion: v1
kind: Service
metadata:
name: nginx-service-nodeport
spec:
ports:
- port: 80
targetPort: 80
nodePort: 30001
protocol: TCP
type: NodePort
selector:
name: nginx
[root@master1 ~]# kubectl apply -f nginx.yaml
[root@master1 ~]# kubectl get svc
[root@master1 ~]# kubectl get pods
3.5.2 验证
ping验证nginx service
访问nginx
