ROS-melodic安装Kinect V2步骤和测试及问题解决
要想Kinect V2在ROS上运行。
需要libfreenect2 和 iai_kinect2两个驱动
再用摄像头前，要确保你安装opencv ,我用的版本是opencv-3.4.3
安装教程网上比较多，这里就不啰嗦了
一．首先安装libfreenect2
１．安装依赖
sudo apt-get install build-essential cmake pkg-config libturbojpeg libjpeg-turbo8-dev mesa-common-dev freeglut3-dev libxrandr-dev libxi-dev
sudo apt-get install libglfw3-dev
sudo apt-get install libopenni2-dev
sudo apt-get install libusb-dev
sudo apt-get install libturbojpeg0-dev
２．开始安装
下载源码
git clone https://github.com/OpenKinect/libfreenect2.git
安装
cd libfreenect2
mkdir build
cd build
cmake ..
make
sudo make install
设定udev路径
#设定udev rules:(填好自己libfreenect2的路径)
sudo cp libfreenect2/platform/linux/udev/90-kinect2.rules /etc/udev/rules.d/
３．测试
#运行build目录下的例子
./bin/Protonect
二.安装iai_kinect2驱动
１，首先进入ROS的工作空间下载源码
cd ~/catkin_ws/src/
git clone https://github.com/code-iai/iai_kinect2.git
cd iai_kinect2
rosdep install -r --from-paths .
在这一步rosdep install -r --from-paths .会报错
解决方法
rosdep install --from-paths ~/catkin_ws/src/iai_kinect2 --ignore-src -r
然后开始编译
cd ~/catkin_ws
catkin_make -DCMAKE_BUILD_TYPE="Release" #编译
#如果没有添加永久环境变量，则每次都需要source以下
source ~/catkin_ws/devel/setup.bash
#添加ros永久环境变量
echo "source ~/catkin_ws/devel/setup.sh" >> ~/.bashrc
我在编译时候出现了问题，如下
/home/zztsj/catkin_ws/src/iai_kinect2/kinect2_bridge/src/kinect2_bridge.cpp: In member function ‘void Kinect2Bridge::initCompression(int32_t, int32_t, bool)’:
/home/zztsj/catkin_ws/src/iai_kinect2/kinect2_bridge/src/kinect2_bridge.cpp:465:28: error: ‘CV_IMWRITE_JPEG_QUALITY’ was not declared in this scope
compressionParams[0] = CV_IMWRITE_JPEG_QUALITY;
^~~~~~~~~~~~~~~~~~~~~~~
/home/zztsj/catkin_ws/src/iai_kinect2/kinect2_bridge/src/kinect2_bridge.cpp:465:28: note: suggested alternative: ‘CV_WRITE_SEQ_ELEM’
compressionParams[0] = CV_IMWRITE_JPEG_QUALITY;
^~~~~~~~~~~~~~~~~~~~~~~
CV_WRITE_SEQ_ELEM
/home/zztsj/catkin_ws/src/iai_kinect2/kinect2_bridge/src/kinect2_bridge.cpp:467:28: error: ‘CV_IMWRITE_PNG_COMPRESSION’ was not declared in this scope
compressionParams[2] = CV_IMWRITE_PNG_COMPRESSION;
^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/zztsj/catkin_ws/src/iai_kinect2/kinect2_bridge/src/kinect2_bridge.cpp:469:28: error: ‘CV_IMWRITE_PNG_STRATEGY’ was not declared in this scope
compressionParams[4] = CV_IMWRITE_PNG_STRATEGY;
^~~~~~~~~~~~~~~~~~~~~~~
/home/zztsj/catkin_ws/src/iai_kinect2/kinect2_bridge/src/kinect2_bridge.cpp:470:28: error: ‘CV_IMWRITE_PNG_STRATEGY_RLE’ was not declared in this scope
compressionParams[5] = CV_IMWRITE_PNG_STRATEGY_RLE;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/zztsj/catkin_ws/src/iai_kinect2/kinect2_bridge/src/kinect2_bridge.cpp: In member function ‘void Kinect2Bridge::initCompression(int32_t, int32_t, bool)’:
/home/zztsj/catkin_ws/src/iai_kinect2/kinect2_bridge/src/kinect2_bridge.cpp:465:28: error: ‘CV_IMWRITE_JPEG_QUALITY’ was not declared in this scope
compressionParams[0] = CV_IMWRITE_JPEG_QUALITY;
^~~~~~~~~~~~~~~~~~~~~~~
/home/zztsj/catkin_ws/src/iai_kinect2/kinect2_bridge/src/kinect2_bridge.cpp:465:28: note: suggested alternative: ‘CV_WRITE_SEQ_ELEM’
compressionParams[0] = CV_IMWRITE_JPEG_QUALITY;
^~~~~~~~~~~~~~~~~~~~~~~
CV_WRITE_SEQ_ELEM
/home/zztsj/catkin_ws/src/iai_kinect2/kinect2_bridge/src/kinect2_bridge.cpp:467:28: error: ‘CV_IMWRITE_PNG_COMPRESSION’ was not declared in this scope
compressionParams[2] = CV_IMWRITE_PNG_COMPRESSION;
^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/zztsj/catkin_ws/src/iai_kinect2/kinect2_bridge/src/kinect2_bridge.cpp:469:28: error: ‘CV_IMWRITE_PNG_STRATEGY’ was not declared in this scope
compressionParams[4] = CV_IMWRITE_PNG_STRATEGY;
^~~~~~~~~~~~~~~~~~~~~~~
/home/zztsj/catkin_ws/src/iai_kinect2/kinect2_bridge/src/kinect2_bridge.cpp:470:28: error: ‘CV_IMWRITE_PNG_STRATEGY_RLE’ was not declared in this scope
compressionParams[5] = CV_IMWRITE_PNG_STRATEGY_RLE;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
查阅资料好像是版本不对应的问题，用oopencv2可以成功，用opencv3的话需要指定安装路径，我的是默认安装的，就出现了一系列没有定义的问题
我的解决方法，没有安装过opencv3，而是改了一种定义方式
将CV_IMWRITE_JPEG_QUALITY;
改为cv::IMWRITE_JPEG_QUALITY;
剩下的改法相同，改完就编译好了，
２．测试
roslaunch kinect2_bridge kinect2_bridge.launch #运行kinect2自带的launch
rosrun kinect2_viewer kinect2_viewer #查看运行结果。
到此，驱动就安装完成了。
