linux应用之mysql数据库指定版本的yum安装（centos）

A Quick Guide to Using the MySQL Yum Repository

Abstract

The MySQL Yum repository provides RPM packages for installing the MySQL server, client, and other components on Linux platforms. The packages also upgrade and replace any third-party MySQL packages installed from the Linux distros' native software repositories, if replacements for them are available from MySQL.

The MySQL Yum repository supports the following Linux platforms :

  • EL5-, EL6-, and EL7-based platforms (for example, the corresponding versions of Red Hat Enterprise Linux, Oracle Linux, and CentOS)

  • Fedora 23 and 24

This is a quick guide to using the MySQL Yum repository. For more information, see Further Readings.

For legal information, see the Legal Notices.

For help with using MySQL, please visit either the MySQL Forums or MySQL Mailing Lists, where you can discuss your issues with other MySQL users.

For additional documentation on MySQL products, including translations of the documentation into other languages, and downloadable versions in variety of formats, including HTML and PDF formats, see the MySQL Documentation Library.

Document generated on: 2016-11-18 (revision: 49896)

Table of Contents     

Steps for a Fresh Installation of MySQL

Note

The following instructions assume that MySQL is not already installed on your system using a third-party-distributed RPM package; if that is not the case, follow the instructions given in Replacing a Native Third-Party Distribution of MySQL.

  1. Adding the MySQL Yum Repository

    First, add the MySQL Yum repository to your system's repository list. Follow these steps:

    1. Go to the download page for MySQL Yum repository at http://dev.mysql.com/downloads/repo/yum/.

    2. Select and download the release package for your platform.

    3. Install the downloaded release package with the following command, replacing platform-and-version-specific-package-name with the name of the downloaded package:

      shell> sudo rpm -Uvh platform-and-version-specific-package-name.rpm

       

      For example, for version n of the package for EL6-based systems, the command is:

      shell> sudo rpm -Uvh mysql57-community-release-el6-n.noarch.rpm

       

     

    Note

    Once the release package is installed on your system, any system-wide update by the yum updatecommand (or dnf upgrade for dnf-enabled systems) will automatically upgrade MySQL packages on your system and also replace any native third-party packages, if Yum finds replacements for them in the MySQL Yum repository. See Upgrading MySQL with the MySQL Yum Repository and Replacing a Native Third-Party Distribution of MySQL for details.

  2. Selecting a Release Series

    When using the MySQL Yum repository, the latest GA release of MySQL is selected for installation by default. If this is what you want, you can skip to the next step, Installing MySQL with Yum.

    Within the MySQL Yum repository (http://repo.mysql.com/yum/), different release series of the MySQL Community Server are hosted in different subrepositories. The subrepository for the latest GA series (currently MySQL 5.7) is enabled by default, and the subrepositories for all other series (for example, the MySQL 5.6 series) are disabled by default. Use this command to see all the subrepositories in the MySQL Yum repository, and see which of them are enabled or disabled (for dnf-enabled systems, replaceyum in the command with dnf):

    shell> yum repolist all | grep mysql

     

    To install the latest release from the latest GA series, no configuration is needed. To install the latest release from a specific series other than the latest GA series, disable the subrepository for the latest GA series and enable the subrepository for the specific series before running the installation command. You can do that by editing manually the /etc/yum.repos.d/mysql-community.repofile. This is a typical entry for a release series' subrepository in the file:

    [mysql57-community]
name=MySQL 5.7 Community Server
baseurl=http://repo.mysql.com/yum/mysql-5.7-community/el/6/$basearch/
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-mysql

    Find the entry for the subrepository you want to configure, and edit the enabled option. Specify enabled=0 to disable a subrepository, or enabled=1 to enable a subrepository. For example, to install MySQl 5.6, make sure you have enabled=0 for the above subrepository entry for MySQL 5.7, and have enabled=1 for the entry for the 5.6 series:

    # Enable to use MySQL 5.6
[mysql56-community]
name=MySQL 5.6 Community Server
baseurl=http://repo.mysql.com/yum/mysql-5.6-community/el/6/$basearch/
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-mysql

    You should only enable subrepository for one release series at any time. When subrepositories for more than one release series are enabled, the latest series will be used by Yum.

    Verify that the correct subrepositories have been enabled and disabled by running the following command and checking its output (for dnf-enabled systems, replace yum in the command with dnf):

    shell> yum repolist enabled | grep mysql

     

  3. Installing MySQL

    Install MySQL by the following command (for dnf-enabled systems, replace yum in the command with dnf):

    shell> sudo yum install mysql-community-server

    This installs the package for the MySQL server, as well as other required packages.

  4. Starting the MySQL Server

    Start the MySQL server with the following command:

    shell> sudo service mysqld start

     

    You can check the status of the MySQL server with the following command:

    shell> sudo service mysqld status

     

    For MySQL 5.7 only: At the initial start up of the server, the following happens, given that the data directory of the server is empty:

    • The server is initialized.

    • An SSL certificate and key files are generated in the data directory.

    • The validate_password plugin is installed and enabled.

    • A superuser account 'root'@'localhost' is created. A password for the superuser is set and stored in the error log file. To reveal it, use the following command:

      shell> sudo grep 'temporary password' /var/log/mysqld.log

      Change the root password as soon as possible by logging in with the generated, temporary password and set a custom password for the superuser account:

      shell> mysql -uroot -p 

      mysql> ALTER USER 'root'@'localhost' IDENTIFIED BY 'MyNewPass4!';
    Note

    MySQL's validate_password plugin is installed by default. This will require that passwords contain at least one upper case letter, one lower case letter, one digit, and one special character, and that the total password length is at least 8 characters.

  5. Securing the MySQL Installation (for MySQL 5.6 only)

    The program mysql_secure_installation allows you to perform important operations like setting the root password, removing anonymous users, and so on. Always run it to secure your MySQL 5.6 installation:

    shell> mysql_secure_installation

     

    It is important to remember the root password you set. See mysql_secure_installation — Improve MySQL Installation Securityfor details.

    Do not run mysql_secure_installation after an installation of MySQL 5.7, as the function of the programe has already been performed by the Yum repository installation.

Note

For EL7-based platforms: See Compatibility Information for EL7-based platforms.

Installing Additional MySQL Products and Components

You can use Yum to install and manage individual components of MySQL. Some of these components are hosted in subrepositories of the MySQL Yum repository. Use the following command to list the packages for all the MySQL components available for your platform from all subrepositories in the MySQL Yum repository (for dnf-enabled systems, replace yum in the command with dnf):

shell> yum --disablerepo=\* --enablerepo='mysql*-community*' list available

Install any packages of your choice with the following command, replacing package-name with name of the package (for dnf-enabled systems, replace yum in the command with dnf):

shell> sudo yum install package-name

For example, to install MySQL Workbench on Fedora 24:

shell> sudo dnf install mysql-workbench-community

 

Upgrading MySQL with the MySQL Yum Repository

Note

  • Before performing any update to MySQL, follow carefully the instructions in Upgrading MySQL. Among other instructions discussed there, it is especially important to back up your database before the update.

Use the MySQL Yum repository to perform an in-place update (that is, replacing the old version and then running the new version off the old data files) for your MySQL installation by following these steps (they assume you have installed MySQL with the MySQL Yum repository or with an RPM package directly downloaded from MySQL Developer Zone's MySQL Download page; if that is not the case, following the instructions in Replacing a Native Third-Party Distribution of MySQL instead):

  1. Selecting a Target Series

    By default, the MySQL Yum repository updates MySQL to the latest version in the release series you have chosen during installation (see Selecting a Release Series for details), which means, for example, a 5.6.x installation will NOT be updated to a 5.7.x release automatically. To update to another release series, you need to first disable the subrepository for the series that has been selected (by default, or by yourself) and enable the subrepository for your target series. To do that, see the general instructions given in Selecting a Release Series for editing the subrepository entries in the/etc/yum.repos.d/mysql-community.repo file. For upgrading from MySQL 5.6 to 5.7, perform the reverse of the steps illustrated in Selecting a Release Series, disabling the subrepository for the MySQL 5.6 series and enabling that for the MySQL 5.7 series.

    As a general rule, to upgrade from one release series to another, go to the next series rather than skipping a series. For example, if you are currently running MySQL 5.5 and wish to upgrade to 5.7, upgrade to MySQL 5.6 first before upgrading to 5.7.

    Important

     

  2. Upgrading MySQL

    Upgrade MySQL and its components by the following command, for platforms that are not dnf-enabled:

    shell> sudo yum update mysql-server

    For dnf-enabled systems:

    shell> sudo dnf --refresh upgrade mysql-server

     

    Alternatively, you can update MySQL by telling Yum to update everything on your system, which might take considerably more time; for platforms that are not dnf-enabled:

    shell> sudo yum update

    For dnf-enabled systems:

    shell> sudo dnf upgrade

     

  3. Restarting MySQL

    The MySQL server always restarts after an update by Yum. Once the server restarts, run mysql_upgrade to check and possibly resolve any incompatibilities between the old data and the upgraded software. mysql_upgrade also performs other functions; see mysql_upgrade — Check and Upgrade MySQL Tables for details.

 

You can also update only a specific component. Use the following command to list all the installed packages for the MySQL components (for dnf-enabled systems, replace yum in the command with dnf):

shell> sudo yum list installed | grep "^mysql"

After identifying the package name of the component of your choice, for platforms that are not dnf-enabled, update the package with the following command, replacing package-name with the name of the package:

shell> sudo yum update package-name

For dnf-enabled systems:

shell> sudo dnf upgrade package-name

 

Replacing a Native Third-Party Distribution of MySQL

To replace third-party distributions of MySQL that were installed from the supported Linux platforms' native software repositories with the latest GA release (from the MySQL 5.7 series currently) from the MySQL Yum repository, follow these steps:

  1. Backing Up Your Database

    To avoid loss of data, always back up your database before trying to replace your MySQL installation using the MySQL Yum repository. See Backup and Recovery on how to back up your database.

  2. Adding the MySQL Yum Repository

    Add the MySQL Yum repository to your system's repository list by following the instructions given in Adding the MySQL Yum Repository.

  3. Replacing the Native Third-Party Distribution by a Yum Update or a DNF Upgrade

    By design, the MySQL Yum repository will replace your native, third-party MySQL with the latest GA release (from the MySQL 5.7 series currently) from the MySQL Yum repository when you perform a yum update command (or dnf upgrade for dnf-enabled systems) on the system, or a yum update mysql-server (or dnf upgrade mysql-server for dnf-enabled systems).

After updating MySQL using the Yum repository, applications compiled with older versions of the shared client libraries should continue to work. However, if you want to recompile applications and dynamically link them with the updated libraries, see Upgrading the Shared Client Libraries for some special considerations.

Notes

Further Readings

More information on the MySQL Yum repository can be found at the following sections in the MySQL server's reference manual:

 

Legal Notices

Copyright © 1997, 2016, Oracle and/or its affiliates. All rights reserved.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle.

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website athttp://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle Support

Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visithttp://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.

This documentation is NOT distributed under a GPL license. Use of this documentation is subject to the following terms:

You may create a printed copy of this documentation solely for your own personal use. Conversion to other formats is allowed as long as the actual content is not altered or edited in any way. You shall not publish or distribute this documentation in any form or on any media, except if you distribute the documentation in a manner similar to how Oracle disseminates it (that is, electronically for download on a Web site with the software) or on a CD-ROM or similar medium, provided however that the documentation is disseminated together with the software on the same medium. Any other use, such as any dissemination of printed copies or use of this documentation, in whole or in part, in another publication, requires the prior written consent from an authorized representative of Oracle. Oracle and/or its affiliates reserve any and all rights to this documentation not expressly granted above.

posted on 2016-11-19 21:02  madtank  阅读(1715)  评论(0)  编辑  收藏  举报

导航