Python PEP8代码规范常见问题及解决方法
之前一直用 Python IDLE 写代码，最近换成 PyCharm 写代码总是会出现波浪号，这才了解到 Python 的 PEP8 代码规范，所以将常见的 PEP8 代码规范问题和解决方法记录一下，学习一下，遇到了再持续更新，养成良好的习惯，编写规范的代码！
-
PEP 8: no newline at end of file
解决方法：代码末尾需要另起一行，光标移到最后回车即可 -
PEP 8: indentation is not a multiple of four
解决方法：缩进不是4的倍数，检查缩进 -
PEP 8: over-indented
解决方法：过度缩进，检查缩进 -
PEP 8: missing whitespace after’,’
解决方法：逗号后面少了空格，添加空格即可，类似还有分号或者冒号后面少了空格 -
PEP 8: multiple imports on one line
解决方法：不要在一句 import 中引用多个库，举例：import socket, urllib.error最好写成：import socketimport urllib.error -
PEP 8: blank line at end of line
解决方法：代码末尾行多了空格，删除空格即可 -
PEP 8: at least two spaces before inline comment
解决方法：代码与注释之间至少要有两个空格 -
PEP 8: block comment should start with ‘#’
解决方法：注释要以#加一个空格开始 -
PEP 8: inline comment should start with ‘#’
解决方法：注释要以#加一个空格开始 -
PEP 8: module level import not at top of file
解决方法：import不在文件的最上面，可能之前还有其它代码 -
PEP 8: expected 2 blank lines，found 0
解决方法：需要两条空白行，添加两个空白行即可 -
PEP 8: function name should be lowercase
解决方法：函数名改成小写即可 -
PEP 8: missing whitespace around operator
解决方法：操作符（’=’、’>’、’<'等）前后缺少空格，加上即可 -
PEP 8: unexpected spaces around keyword / parameter equals
解决方法：关键字/参数等号周围出现意外空格，去掉空格即可 -
PEP 8: multiple statements on one line (colon)
解决方法：多行语句写到一行了，比如：if x == 2: print('OK')要分成两行写 -
PEP 8: line too long (82 > 79 characters)
解决方法：超过了每行的最大长度限制79 -
PEP 8: Simplify chained comparison
可简化连锁比较（例如：if a >= 0 and a <= 9:可以简写为：if 0 <= a <= 9:）
如果想要选择性忽略PEP8代码风格的警告信息可以使用以下方法：（养成良好的习惯，编写规范的代码！不推荐忽略！）
①将鼠标移到出现警告信息的地方，按 alt+Enter，选择忽略（Ignore）这个错误即可：
②依次选择 File - Settings - Editor - Inspections，在 Python下找到 PEP8 coding style violation 选项，在右下角的 Ignore errors 里点击加号可以添加需要忽略的警告信息ID（ID信息见后面附录），例如想要忽略indentation contains mixed spaces and tabs这个警告，只需要添加其ID：E101 即可
附录：全部警告信息以及对应的ID，官方地址：https://pep8.readthedocs.io/en/latest/intro.html#error-codes
| code | sample message |
|---|---|
| E1 | Indentation |
| E101 | indentation contains mixed spaces and tabs |
| E111 | indentation is not a multiple of four |
| E112 | expected an indented block |
| E113 | unexpected indentation |
| E114 | indentation is not a multiple of four (comment) |
| E115 | expected an indented block (comment) |
| E116 | unexpected indentation (comment) |
| E117 | over-indented |
| E121 (*^) | continuation line under-indented for hanging indent |
| E122 (^) | continuation line missing indentation or outdented |
| E123 (*) | closing bracket does not match indentation of opening bracket’s line |
| E124 (^) | closing bracket does not match visual indentation |
| E125 (^) | continuation line with same indent as next logical line |
| E126 (*^) | continuation line over-indented for hanging indent |
| E127 (^) | continuation line over-indented for visual indent |
| E128 (^) | continuation line under-indented for visual indent |
| E129 (^) | visually indented line with same indent as next logical line |
| E131 (^) | continuation line unaligned for hanging indent |
| E133 (*) | closing bracket is missing indentation |
| E2 | Whitespace |
| E201 | whitespace after ‘(‘ |
| E202 | whitespace before ‘)’ |
| E203 | whitespace before ‘:’ |
| E211 | whitespace before ‘(‘ |
| E221 | multiple spaces before operator |
| E222 | multiple spaces after operator |
| E223 | tab before operator |
| E224 | tab after operator |
| E225 | missing whitespace around operator |
| E226 (*) | missing whitespace around arithmetic operator |
| E227 | missing whitespace around bitwise or shift operator |
| E228 | missing whitespace around modulo operator |
| E231 | missing whitespace after ‘,’, ‘;’, or ‘:’ |
| E241 (*) | multiple spaces after ‘,’ |
| E242 (*) | tab after ‘,’ |
| E251 | unexpected spaces around keyword / parameter equals |
| E261 | at least two spaces before inline comment |
| E262 | inline comment should start with ‘# ‘ |
| E265 | block comment should start with ‘# ‘ |
| E266 | too many leading ‘#’ for block comment |
| E271 | multiple spaces after keyword |
| E272 | multiple spaces before keyword |
| E273 | tab after keyword |
| E274 | tab before keyword |
| E275 | missing whitespace after keyword |
| E3 | Blank line |
| E301 | expected 1 blank line, found 0 |
| E302 | expected 2 blank lines, found 0 |
| E303 | too many blank lines (3) |
| E304 | blank lines found after function decorator |
| E305 | expected 2 blank lines after end of function or class |
| E306 | expected 1 blank line before a nested definition |
| E4 | Import |
| E401 | multiple imports on one line |
| E402 | module level import not at top of file |
| E5 | Line length |
| E501 (^) | line too long (82 > 79 characters) |
| E502 | the backslash is redundant between brackets |
| E7 | Statement |
| E701 | multiple statements on one line (colon) |
| E702 | multiple statements on one line (semicolon) |
| E703 | statement ends with a semicolon |
| E704 (*) | multiple statements on one line (def) |
| E711 (^) | comparison to None should be ‘if cond is None:’ |
| E712 (^) | comparison to True should be ‘if cond is True:’ or ‘if cond:’ |
| E713 | test for membership should be ‘not in’ |
| E714 | test for object identity should be ‘is not’ |
| E721 (^) | do not compare types, use ‘isinstance()’ |
| E722 | do not use bare except, specify exception instead |
| E731 | do not assign a lambda expression, use a def |
| E741 | do not use variables named ‘l’, ‘O’, or ‘I’ |
| E742 | do not define classes named ‘l’, ‘O’, or ‘I’ |
| E743 | do not define functions named ‘l’, ‘O’, or ‘I’ |
| E9 | Runtime |
| E901 | SyntaxError or IndentationError |
| E902 | IOError |
| W1 | Indentation warning |
| W191 | indentation contains tabs |
| W2 | Whitespace warning |
| W291 | trailing whitespace |
| W292 | no newline at end of file |
| W293 | blank line contains whitespace |
| W3 | Blank line warning |
| W391 | blank line at end of file |
| W5 | Line break warning |
| W503 (*) | line break before binary operator |
| W504 (*) | line break after binary operator |
| W505 (*^) | doc line too long (82 > 79 characters) |
| W6 | Deprecation warning |
| W601 | .has_key() is deprecated, use ‘in’ |
| W602 | deprecated form of raising exception |
| W603 | ‘<>’ is deprecated, use ‘!=’ |
| W604 | backticks are deprecated, use ‘repr()’ |
| W605 | invalid escape sequence ‘x’ |
| W606 | ‘async’ and ‘await’ are reserved keywords starting with Python 3.7 |
原文地址：
https://blog.csdn.net/qq_36759224/article/details/89304878
