kubeadm方式搭建k8s 1.20版本
前期环境说明
主机预设系统环境
本测试环境由master01、node01、node02、node03这四台主机组成，它们分别有2个核心CPU，4G内存，各主机预设系统环境如下：
1、修改主机名、时间同步
2、通过DNS完成各节点的主机名解析，测试环境主机数量较少时也可使用hosts文件进行解析
3、关闭各节点iptables、firewalld服务并确保它们被禁止随系统引导过程启动
4、各节点禁止所有的swap设备
5、若要使用ipvs模型的proxy，各节点还需要载入ipvs相关的模块
主机名解析
所有节点执行
[root@master01 ~]# vim /etc/hosts
173.172.16.186.111 master.ik8s.com master01
172.16.186.112 node01.ik8s.com node01
172.16.186.113 node02.ik8s.com node02
172.16.186.114 node03.ik8s.com node03
[root@master01 ~]#
时间同步
以2台为例，其他都这样设置
hostnamectl set-hostname master01
hostnamectl set-hostname node01
[root@master01 ~]# vim /etc/chrony.conf
#server 0.centos.pool.ntp.org iburst
#server 1.centos.pool.ntp.org iburst
#server 2.centos.pool.ntp.org iburst
#server 3.centos.pool.ntp.org iburst
server ntp.aliyun.com iburst
[root@master01 ~]# systemctl restart chronyd
[root@node01 ~]# vim /etc/chrony.conf
#server 0.centos.pool.ntp.org iburst
#server 1.centos.pool.ntp.org iburst
#server 2.centos.pool.ntp.org iburst
#server 3.centos.pool.ntp.org iburst
server master01 iburst
[root@node01 ~]# systemctl restart chronyd
关闭iptables或firewall、selinux
所有节点执行
# 默认OS没安装iptables
systemctl stop firewalld && systemctl disable firewalld
sed -i "s/^\(SELINUX=\).*/\1disabled/" /etc/selinux/config
setenforce 0
swapoff -a
vim /etc/fstab
#/dev/mapper/centos-swap swap swap defaults 0 0 #注释该行
启用ipvs内核模块
所有节点执行
vim /etc/sysconfig/modules/ipvs.modules
#!/bin/bash
ipvs_mods_dir="/usr/lib/modules/$(uname -r)/kernel/net/netfilter/ipvs"
for i in $(ls $ipvs_mods_dir | grep -o "^[^.]*");do
/sbin/modinfo -F filename $i &>/dev/null
if [ $? -eq 0 ];then
/sbin/modprobe $i
fi
done
chmod +x /etc/sysconfig/modules/ipvs.modules
bash /etc/sysconfig/modules/ipvs.modules
安装程序包
安装docker
所有节点执行
yum仓库配置
mkdir /etc/docker
cat>> /etc/docker/daemon.json<<EOF
{
"exec-opts": ["native.cgroupdriver=systemd"],
"registry-mirrors" : [
"https://registry.docker-cn.com",
"https://docker.mirrors.ustc.edu.cn",
"http://hub-mirror.c.163.com",
"https://cr.console.aliyun.com/",
"https://0trl8ny5.mirror.aliyuncs.com"
]
}
EOF
yum -y install yum-utils
yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
yum makecache fast
# yum list docker-ce --showduplicates | sort -r #查看所有docker版本
yum -y install docker-ce-19.03.9 docker-ce-cli-19.03.9 containerd.io
# docker自1.13版起会自动设置iptables的FOREARRD默认策略为DROP，这可能会影响k8s集群依赖的报文转发功能，因此需要在docker服务器启动后(或后)重新将FORWARD链的默认策略设置为ACCEPT，这里在启动前设置
vim /usr/lib/systemd/system/docker.service
[Service]
Environment="NO_PROXY=127.0.0.0/8,172.16.0.0/24" #不代理这2个网络
ExecStart=/usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock
ExecStartPost=/usr/sbin/iptables -P FORWARD ACCEPT
注：意为在docker启动后执行ExecStartPost将FORWARD改成ACCEPT状态
systemctl daemon-reload
systemctl start docker && systemctl enable docker
检查核对
docker info | grep "No Proxy"
iptables -vnL | grep "Chain FORWARD"
cat > /etc/sysctl.d/k8s.conf << EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
sysctl -p /etc/sysctl.d/k8s.conf
安装k8s
# k8s源要在所有节点上安装配置
vim /etc/yum.repos.d/k8s.repo
[k8s]
name=k8s repo
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
enabled=1
yum repolist
yum list all | grep "^kube"
# master上安装
[root@master01 ~]# yum -y install kubeadm-1.20.8 kubelet-1.20.8 kubectl-1.20.8
[root@master01 ~]# systemctl start kubelet && systemctl enable kubelet
[root@master01 ~]# for i in kubelet kubeadm kubectl;do rpm -ql $i;done
============= 按需执行项 ==============
vim /etc/sysconfig/kubelet
KUBELET_EXTRA_ARGS="--fail-swap-on=false"
注：意为如swaq是启用状态，在初始化集群时是要要报错，本文档已关闭了swap所以这里不做修改
# 初始化集群前参数说明
[root@master01 ~]# kubeadm --help
Available Commands:
certs Commands related to handling kubernetes certificates
completion 该参数对shell自动补全
config 管理保存在集群 ConfigMap 中的 kubeadm 集群的配置，下面会有单独的说明
init 只有在master节点上初始化集群时才使用该参数
join 只有在要将node节点加入到集群中时才在node节点上使用该参数
reset 无论是master还是node节点想把之前初始化的功能、组件等通通还原/重置时才使用该参数
token 该参数是管理bootstrap令牌的
upgrade 该参数是将您的集群平稳升级到较新版本
config参数说明
[root@master01 ~]# kubeadm config print -h | egrep '(init|join)-default'
init-defaults Print default init configuration, that can be used for 'kubeadm init'
join-defaults Print default join configuration, that can be used for 'kubeadm join'
# 使用kubeadm初始化一个集群时会会加载哪些配置，使用config参数可打印出，如下
[root@master01 ~]# kubeadm config print init-defaults
apiVersion: kubeadm.k8s.io/v1beta2
bootstrapTokens:
- groups:
- system:bootstrappers:kubeadm:default-node-token
token: abcdef.0123456789abcdef
ttl: 24h0m0s
usages:
- signing
- authentication
kind: InitConfiguration
localAPIEndpoint:
advertiseAddress: 1.2.3.4
bindPort: 6443
nodeRegistration:
criSocket: /var/run/dockershim.sock
name: node
taints: null
---
apiServer:
timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta2
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controllerManager: {}
dns:
type: CoreDNS
etcd:
local:
dataDir: /var/lib/etcd
imageRepository: k8s.gcr.io
kind: ClusterConfiguration
kubernetesVersion: 1.21.0
networking:
dnsDomain: cluster.local
serviceSubnet: 10.96.0.0/12
scheduler: {}
flannel默认网络：10.244.0.0/16
calico默认网络：192.168.0.0/16
======================================
初始化集群
方式1：
使用传递参数的方式，使用kubeadm init --help查看所需参数并指定，如下示例
[root@master01 ~]# kubeadm init --kubernetes-version=v1.21.0 --pod-network-cidr=10.244.0.0/16 --service-cidr=10.96.0.0/12 --ignore-preflight-errors=Swap
方式2：
使用yml文件定义好所有的选项，而后使用kubeadm init --config 来加载配置文件
这里使用第一种方式
rpm -q kubeadm
kubeadm-1.21.2-0.x86_64
正式初始化集群前先单独把镜像pull下来，先列出要pull的镜像有哪些
[root@master01 ~]# kubeadm config images list #这些是当前的版本
k8s.gcr.io/kube-apiserver:v1.21.2
k8s.gcr.io/kube-controller-manager:v1.21.2
k8s.gcr.io/kube-scheduler:v1.21.2
k8s.gcr.io/kube-proxy:v1.21.2
k8s.gcr.io/pause:3.4.1
k8s.gcr.io/etcd:3.4.13-0
k8s.gcr.io/coredns/coredns:v1.8.0
然后编写脚本在所有节点上进行pull镜像
vim image_pull.sh
#!/bin/bash
# 从新的地址下载所需镜像
images=(
kube-apiserver:v1.20.8
kube-controller-manager:v1.20.8
kube-scheduler:v1.20.8
kube-proxy:v1.20.8
pause:3.2
etcd:3.4.3-0
coredns:1.7.0)
for i in ${images[@]};do
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/$i
docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/$i k8s.gcr.io/$i
docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/$i
done
# 在所有节点上执行脚本
sh -x image_pull.sh
# 如需测试跑下集群则需加上--dry-run参数即可，注意，测试时不会真正安装
kubeadm init --dry-run \
# 初始化集群只在master节点上执行
[root@master01 ~]# kubeadm init \
--image-repository registry.aliyuncs.com/google_containers \
--kubernetes-version="1.20.8" \
--pod-network-cidr="10.244.0.0/16" \
--apiserver-advertise-address 172.16.186.111 \
--control-plane-endpoint 172.16.186.111 \
--token-ttl 0
Your Kubernetes control-plane has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
Alternatively, if you are the root user, you can run:
export KUBECONFIG=/etc/kubernetes/admin.conf
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
You can now join any number of control-plane nodes by copying certificate authorities
and service account keys on each node and then running the following as root:
kubeadm join 172.16.186.111:6443 --token 27kdvx.icgzqrvfavq2dwf7 \
--discovery-token-ca-cert-hash sha256:9d7af2bc1136db927590535f3ae4ba2fba5873682c68365e67d4d2ec6e113f9f \
--control-plane
Then you can join any number of worker nodes by running the following on each as root:
kubeadm join 172.16.186.111:6443 --token 27kdvx.icgzqrvfavq2dwf7 \
--discovery-token-ca-cert-hash sha256:9d7af2bc1136db927590535f3ae4ba2fba5873682c68365e67d4d2ec6e113f9f
[root@master01 ~]# mkdir -p $HOME/.kube
[root@master01 ~]# cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@master01 ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
master01 NotReady control-plane,master 14m v1.20.8
注：状态为NotReady状态，是因为没有网络插件
部署网络清单插件(flannel)
注：因为raw.github.com时常访问错误，所以提前要做设置
打开https://www.ipaddress.com 输入 raw.githubusercontent.com，将解析出来的IP地址加入到本机的/etc/hosts中
[root@master01 ~]# vim /etc/hosts
185.199.108.133 raw.githubusercontent.com
185.199.109.133 raw.githubusercontent.com
185.199.110.133 raw.githubusercontent.com
185.199.111.133 raw.githubusercontent.com
# https://github.com/flannel-io/flannel
[root@master01 ~]# kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
podsecuritypolicy.policy/psp.flannel.unprivileged created
clusterrole.rbac.authorization.k8s.io/flannel created
clusterrolebinding.rbac.authorization.k8s.io/flannel created
serviceaccount/flannel created
configmap/kube-flannel-cfg created
daemonset.apps/kube-flannel-ds created
[root@master01 ~]# kubectl get pod -n kube-system
NAME READY STATUS RESTARTS AGE
coredns-7f89b7bc75-rsh6q 1/1 Running 0 20m
coredns-7f89b7bc75-vmdh7 1/1 Running 0 20m
etcd-master01 1/1 Running 0 21m
kube-apiserver-master01 1/1 Running 0 21m
kube-controller-manager-master01 1/1 Running 0 21m
kube-flannel-ds-xknps 1/1 Running 0 116s
kube-proxy-kckxb 1/1 Running 0 20m
kube-scheduler-master01 1/1 Running 0 21m
[root@master01 ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
master01 Ready control-plane,master 21m v1.20.8
注：状态已变为Ready
8080端口是早期k8s上明文的http协议，后期的k8s已不再使用8080端口
6443端口是apiserver上的https协议
apiserver对用户认证是向认证的，而且必须是apiserver自身信任的CA颁发的证书才能获得apiserver的认可，这个CA是在部署k8s时自动生成的，是/etc/kubernetes/pki/ca.crt这个私有CA的CA证书，而/etc/kubernetes/admin.conf中就有一个apiserver自身信任的CA颁发的证书，所以想在集群中任意节点上执行k8s命令，则必须在把这个证书文件放到指定位置
查看证书：
[root@master01 ~]# kubectl config view
apiVersion: v1
clusters:
- cluster:
certificate-authority-data: DATA+OMITTED #ca证书(已隐藏起来)
server: https://172.16.186.111:6443
name: kubernetes
contexts:
- context:
cluster: kubernetes
user: kubernetes-admin
name: kubernetes-admin@kubernetes
current-context: kubernetes-admin@kubernetes
kind: Config
preferences: {}
users:
- name: kubernetes-admin
user:
client-certificate-data: REDACTED #连接ca时客户端证书(已隐藏起来)
client-key-data: REDACTED #客户端私钥(已隐藏起来)
在k8s上资源可分为2个级别：
(1)集群级别，node是集群级别的资源
(2)整个集群又可划分为多个名称空间
查看默认生成的名称空间
[root@master01 ~]# kubectl get ns
NAME STATUS AGE
default Active 83m
kube-node-lease Active 83m
kube-public Active 83m
kube-system Active 83m
其中系统级的pod都运行在kube-system这个名称空间下
未明确指定名称空间的都使用的是default，
kube-public是公共的，任何人都可以访问
查看kube-system名称空间下的pod
[root@master01 ~]# kubectl get pod -n kube-system
NAME READY STATUS RESTARTS AGE
coredns-7f89b7bc75-rsh6q 1/1 Running 0 87m
coredns-7f89b7bc75-vmdh7 1/1 Running 0 87m
...
kube-proxy-kckxb 1/1 Running 0 87m
kube-scheduler-master01 1/1 Running 0 87m
或者
[root@master01 ~]# kubectl get pod -n kube-system -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
coredns-7f89b7bc75-rsh6q 1/1 Running 0 88m 10.244.0.2 master01 <none> <none>
coredns-7f89b7bc75-vmdh7 1/1 Running 0 88m 10.244.0.3 master01 <none> <none>
...
kube-proxy-kckxb 1/1 Running 0 88m 172.16.186.111 master01 <none> <none>
kube-scheduler-master01 1/1 Running 0 88m 172.16.186.111 master01 <none> <none>
注意：有些pod的是10的地址，有些pod是172的地址，172的地址这个pod共享了宿主机的网络名称空间
master节点到此安装完成
配置其他所有node节点
yum -y install kubeadm-1.20.8 kubelet-1.20.8
systemctl start kubelet.service && systemctl enable kubelet.service
在所有node节点上执行如下命令，表示将node节点添加到集群中，下面命令是在master节点上初始化好集群后的回显中规定的，建议一个节点一个节点执行，不要同时在node节点上执行
kubeadm join 172.16.186.111:6443 --token 27kdvx.icgzqrvfavq2dwf7 \
--discovery-token-ca-cert-hash sha256:9d7af2bc1136db927590535f3ae4ba2fba5873682c68365e67d4d2ec6e113f9f
回到master节点查看各node状态
kubectl get nodes
NAME STATUS ROLES AGE VERSION
master01 Ready control-plane,master 45m v1.20.8
node01 Ready <none> 8m46s v1.20.8
node02 Ready <none> 8m30s v1.20.8
node03 Ready <none>
现在在所有node节点上都不能查看node节点状态的命令，如下
[root@node01 ~]# kubectl get nodes
The connection to the server localhost:8080 was refused - did you specify the right host or port?
解决该问题
[root@node01 ~]# mkdir .kube # 所有node节点上创建好该目录
[root@master01 ~]# scp .kube/config node01:/root/.kube/ # master节点将配置文件发送到各node节点指定目录中，然后再在node节点上查看
[root@node01 ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
master01 Ready control-plane,master 53m v1.20.8
node01 Ready <none> 16m v1.20.8
node02 Ready <none> 15m v1.20.8
node03 Ready <none> 15m v1.20.8
.
.
.
.
游走在各发行版间老司机QQ群：905201396
不要嫌啰嗦的新手QQ群：756805267
Debian适应QQ群：912567610
