Mina状态机State Machine

首先，关于状态机的一个极度确切的描述是它是一个有向图形，由一组节点和一组相应的转移函数组成。状态机通过响应一系列事件而“运行”。每个事件都在属于 “当前” 节点的转移函数的控制范围内，其中函数的范围是节点的一个子集。函数返回“下一个”（也许是同一个）节点。这些节点中至少有一个必须是终态。当到达终态， 状态机停止。

接下来的问题是，我们为什么要用状态机，什么时候用：

传统应用程序的控制流程基本是顺序的：遵循事先设定的逻辑，从头到尾地执行。很少有事件能改变标准执行流程；而且这些事件主要涉及异常情况。“命令行实用程序”是这种传统应用程序的典型例子。

另一类应用程序由外部发生的事件来驱动——换言之，事件在应用程序之外生成，无法由应用程序或程序员来控制。具体需要执行的代码取决于接收到的事件，或者 它 相对于其他事件的抵达时间。所以，控制流程既不能是顺序的，也不能是事先设定好的，因为它要依赖于外部事件。事件驱动的GUI应用程序是这种应用程序的典 型例子，它们由命令和选择（也就是用户造成的事件）来驱动。

下面我们看个mina-statemachine的简单例子。 

The picture below shows a state machine for a typical tape deck. The ellipsis is the states while the arrows are the transitions. Each transition is labeled with an event name which triggers that transition.

状态机可归纳为4个要素，即现态、条件、动作、次态。

下面用代码来实现这一过程，首先我们定义动作接口：

01	package com.a2.desktop.example9.mina.statemachine;

02

03

/**

04

* 动作接口

05

*

06	* @author ChenHui

07

*

08

*/

09	public interface TapeDeck {

10

11	void load(String nameOfTape);

12

13	void eject();

14

15	void play();

16

17	void pause();

18

19	void stop();

20

}

Tape Deck就是老式的录音机的意思。而动作接口，就相当于录音机外面的几个按钮。接下来我们定义状态：

01	package com.a2.desktop.example9.mina.statemachine;

02

03	import org.apache.mina.statemachine.annotation.State;

04	import org.apache.mina.statemachine.annotation.Transition;

05	import org.apache.mina.statemachine.annotation.Transitions;

06

07

/**

08

* 定义状态

09

*

10	* @author ChenHui

11

*

12

*/

13	public class TapeDeckHandler {

14

@State

15	public static final String EMPTY = "Empty";

16

@State

17	public static final String LOADED = "Loaded";

18

@State

19	public static final String PLAYING = "Playing";

20

@State

21	public static final String PAUSED = "Paused";

22

23	@Transition(on = "load", in = EMPTY, next = LOADED)

24	public void loadTape(String nameOfTape) {

25	System.out.println("Tape '" + nameOfTape + "' loaded");

26

}

27

28	@Transitions({

29	@Transition(on = "play", in = LOADED, next = PLAYING),

30	@Transition(on = "play", in = PAUSED, next = PLAYING)

31

})

32	public void playTape() {

33	System.out.println("Playing tape");

34

}

35

36	@Transition(on = "pause", in = PLAYING, next = PAUSED)

37	public void pauseTape() {

38	System.out.println("Tape paused");

39

}

40

41	@Transition(on = "stop", in = PLAYING, next = LOADED)

42	public void stopTape() {

43	System.out.println("Tape stopped");

44

}

45

46	@Transition(on = "eject", in = LOADED, next = EMPTY)

47	public void ejectTape() {

48	System.out.println("Tape ejected");

49

}

50

}

状态即现态。在Transition Annotation中的on表示动作的ID，对应着动作接口中的方法名，in表示的是动作的起始状态，next表示的是动作的后续状态。

这里要注意以下几点：

1	More about the @Transition parameters

2	•   If you omit the on parameter it will default to "*" which will match any event.

3	•   If you omit the next parameter it will default to "_self_" which is an alias for the current state. To create a loop transition in your state machine all you have to do is to omit the next parameter.

4	•   The weight parameter can be used to define in what order transitions will be searched. Transitions for a particular state will be ordered in ascending order according to their weight value. weight is 0 by default.

最后我们看一下测试类：

01	package com.a2.desktop.example9.mina.statemachine;

02

03	import org.apache.mina.statemachine.StateMachine;

04	import org.apache.mina.statemachine.StateMachineFactory;

05	import org.apache.mina.statemachine.StateMachineProxyBuilder;

06	import org.apache.mina.statemachine.annotation.Transition;

07

08	public class Test {

09

10	public static void main(String[] args) {

11

12	TapeDeckHandler handler = new TapeDeckHandler();

13	StateMachine sm = StateMachineFactory.getInstance(Transition.class).create(TapeDeckHandler.EMPTY, handler);

14	TapeDeck deck = new StateMachineProxyBuilder().create(TapeDeck.class, sm);

15

16	deck.load("Kiss Goodbye-Lee Hom");

17	deck.play();

18	deck.pause();

19	deck.play();

20	deck.stop();

21	deck.eject();

22

}

23

}

运行结果正确，按着我们放置录音的想法来的。如果，我们调换其中的一个顺序，当然不符合我的逻辑：

1	deck.load("Kiss Goodbye-Lee Hom");

2	deck.play();

3	deck.pause();

4	deck.play();

5	deck.stop();

6	deck.pause();/**stop-->pause org.apache.mina.statemachine.event.UnhandledEventException*/

7	deck.eject();

这样程序就报错了，所以mina的状态机帮我们很方便的调控了事件发生的状态。

我们来看一下mina状态机实现的一些细节：

1.    Lookup a StateContext Object

       The StateContext object is important because it holds the current State. When a method is called on the proxy it will ask aStateContextLookup instance to get the StateContext from the method's arguments. Normally, the StateContextLookup implementation will loop through the method arguments and look for a particular type of object and use it to retrieve a StateContext object. If noStateContext has been assigned yet the StateContextLookup will create one and store it in the object.

2.    Convert the method invocation into an Event object

All method invocations on the proxy object will be translated into Event objects by the proxy. An Event has an id and zero or more arguments. The id corresponds to the name of the method and the event arguments correspond to the method arguments. The method call deck.load("The Knife - Silent Shout") corresponds to the event {id = "load", arguments = ["The Knife - Silent Shout"]}. The Event object also contains a reference to the StateContext object looked up previously.

3.    Invoke the StateMachine

Once the Event object has been created the proxy will call StateMachine.handle(Event). StateMachine.handle(Event) loops through the Transition objects of the current State in search for a Transition instance which accepts the current Event. This process will stop after a Transition has been found. The Transition objects will be searched in order of weight (typically specified by the@Transition  annotation).

4.    Execute the Transition

The final step is to call Transition.execute(Event) on the Transition which matched the Event. After the Transition has been executed the StateMachine will update the current State with the end state defined by the Transition.

--------------------------------------------------------------------

上面只是用mina实现了一个最简单的状态机，通过这个例子我们可以大概的了解到了状态机的执行过程，当然基于Annotation这样的方式我们用最基本的代码也能实现出来。接下来我们要把这样的方式用在通信中。用通信的方式来模拟录放机的按钮。

我们先看状态的定义：

001	package com.a2.desktop.example10.mina.statemachine;

002

003	import static org.apache.mina.statemachine.event.IoHandlerEvents.EXCEPTION_CAUGHT;

004	import static org.apache.mina.statemachine.event.IoHandlerEvents.MESSAGE_RECEIVED;

005	import static org.apache.mina.statemachine.event.IoHandlerEvents.SESSION_OPENED;

006

007	import org.apache.mina.core.future.IoFutureListener;

008	import org.apache.mina.core.session.IoSession;

009

010	import org.apache.mina.statemachine.StateControl;

011	import org.apache.mina.statemachine.annotation.IoHandlerTransition;

012	import org.apache.mina.statemachine.annotation.IoHandlerTransitions;

013	import org.apache.mina.statemachine.annotation.State;

014	import org.apache.mina.statemachine.context.AbstractStateContext;

015	import org.apache.mina.statemachine.context.StateContext;

016	import org.apache.mina.statemachine.event.Event;

017

018	public class TapeDeckServer {

019

020

@State

021	public static final String ROOT = "Root";

022	@State(ROOT)

023

// 表示继承关系

024	public static final String EMPTY = "Empty";

025	@State(ROOT)

026	public static final String LOADED = "Loaded";

027	@State(ROOT)

028	public static final String PLAYING = "Playing";

029	@State(ROOT)

030	public static final String PAUSED = "Paused";

031

032	private final String[] tapes = { "盖世英雄-王力宏", "唯一-王力宏" };

033

034	static class TapeDeckContext extends AbstractStateContext {

035	public String tapeName;

036

}

037

038	@IoHandlerTransition(on = SESSION_OPENED, in = EMPTY)

039	public void connect(IoSession session) {

040	session.write("+ Greetings from your tape deck!");

041

}

042

043	@IoHandlerTransition(on = MESSAGE_RECEIVED, in = EMPTY, next = LOADED)

044	public void loadTape(TapeDeckContext context, IoSession session, LoadCommand cmd) {

045

046	if (cmd.getTapeNumber() < 1 || cmd.getTapeNumber() > tapes.length) {

047	session.write("- Unknown tape number: " + cmd.getTapeNumber());

048	StateControl.breakAndGotoNext(EMPTY);

049

} else {

050	context.tapeName = tapes[cmd.getTapeNumber() - 1];

051	session.write("+ \"" + context.tapeName + "\" loaded");

052

}

053

}

054

055	@IoHandlerTransitions({

056	@IoHandlerTransition(on = MESSAGE_RECEIVED, in = LOADED, next = PLAYING),

057	@IoHandlerTransition(on = MESSAGE_RECEIVED, in = PAUSED, next = PLAYING)

058

})

059	public void playTape(TapeDeckContext context, IoSession session, PlayCommand cmd) {

060	session.write("+ Playing \"" + context.tapeName + "\"");

061

}

062

063	@IoHandlerTransition(on = MESSAGE_RECEIVED, in = PLAYING, next = PAUSED)

064	public void pauseTape(TapeDeckContext context, IoSession session, PauseCommand cmd) {

065	session.write("+ \"" + context.tapeName + "\" paused");

066

}

067

068	@IoHandlerTransition(on = MESSAGE_RECEIVED, in = PLAYING, next = LOADED)

069	public void stopTape(TapeDeckContext context, IoSession session, StopCommand cmd) {

070	session.write("+ \"" + context.tapeName + "\" stopped");

071

}

072

073	@IoHandlerTransition(on = MESSAGE_RECEIVED, in = LOADED, next = EMPTY)

074	public void ejectTape(TapeDeckContext context, IoSession session, EjectCommand cmd) {

075	session.write("+ \"" + context.tapeName + "\" ejected");

076	context.tapeName = null;

077

}

078

079	@IoHandlerTransition(on = MESSAGE_RECEIVED, in = ROOT)

080	public void listTapes(IoSession session, ListCommand cmd) {

081	StringBuilder response = new StringBuilder("+ (");

082	for (int i = 0; i < tapes.length; i++) {

083	response.append(i + 1).append(": ");

084	response.append('"').append(tapes[i]).append('"');

085	if (i < tapes.length - 1) {

086	response.append(", ");

087

}

088

}

089	response.append(')');

090	session.write(response);

091

}

092

093	@IoHandlerTransition(on = MESSAGE_RECEIVED, in = ROOT)

094	public void info(TapeDeckContext context, IoSession session, InfoCommand cmd) {

095	String state = context.getCurrentState().getId().toLowerCase();

096	if (context.tapeName == null) {

097	session.write("+ Tape deck is " + state + "");

098

} else {

099	session.write("+ Tape deck is " + state

100	+ ". Current tape: \"" + context.tapeName + "\"");

101

}

102

}

103

104	@IoHandlerTransition(on = MESSAGE_RECEIVED, in = ROOT)

105	public void quit(TapeDeckContext context, IoSession session, QuitCommand cmd) {

106	session.write("+ Bye! Please come back!").addListener(IoFutureListener.CLOSE);

107

}

108

109	@IoHandlerTransition(on = MESSAGE_RECEIVED, in = ROOT, weight = 10)

110	public void error(Event event, StateContext context, IoSession session, Command cmd) {

111	session.write("- Cannot " + cmd.getName()

112	+ " while " + context.getCurrentState().getId().toLowerCase());

113

}

114

115	@IoHandlerTransition(on = EXCEPTION_CAUGHT, in = ROOT)

116	public void commandSyntaxError(IoSession session, CommandSyntaxException e) {

117	session.write("- " + e.getMessage());

118

}

119

120	@IoHandlerTransition(on = EXCEPTION_CAUGHT, in = ROOT, weight = 10)

121	public void exceptionCaught(IoSession session, Exception e) {

122	e.printStackTrace();

123	session.close(true);

124

}

125

126	@IoHandlerTransition(in = ROOT, weight = 100)

127	public void unhandledEvent() {

128

}

129

130

}

命令的抽象类：

1	package com.a2.desktop.example10.mina.statemachine;

2

3	public abstract class Command {

4	public abstract String getName();

5

}

以下是各类命令，实现形式相似：

01	package com.a2.desktop.example10.mina.statemachine;

02

03	public class LoadCommand extends Command {

04

05	public static final String NAME = "load";

06

07	private final int tapeNumber;

08

09	public LoadCommand(int tapeNumber) {

10	this.tapeNumber = tapeNumber;

11

}

12

13	public int getTapeNumber() {

14	return tapeNumber;

15

}

16

17

@Override

18	public String getName() {

19	return NAME;

20

}

21

22

}

23

24	package com.a2.desktop.example10.mina.statemachine;

25

26	public class PlayCommand extends Command {

27

28	public static final String NAME = "play";

29

30

@Override

31	public String getName() {

32	return NAME;

33

}

34

}

35	//以下省略各种命令…

下面是解码器,继承了文本的解码方式：

01	package com.a2.desktop.example10.mina.statemachine;

02

03	import java.nio.charset.Charset;

04	import java.util.LinkedList;

05

06	import org.apache.mina.core.buffer.IoBuffer;

07	import org.apache.mina.core.filterchain.IoFilter.NextFilter;

08	import org.apache.mina.core.session.IoSession;

09	import org.apache.mina.filter.codec.ProtocolDecoderOutput;

10	import org.apache.mina.filter.codec.textline.LineDelimiter;

11	import org.apache.mina.filter.codec.textline.TextLineDecoder;

12

13	public class CommandDecoder extends TextLineDecoder {

14

15	public CommandDecoder() {

16	super(Charset.forName("UTF8"), LineDelimiter.WINDOWS);

17

}

18

19	private Object parseCommand(String line) throws CommandSyntaxException {

20	String[] temp = line.split(" +", 2);

21	String cmd = temp[0].toLowerCase();

22	String arg = temp.length > 1 ? temp[1] : null;

23

24	if (LoadCommand.NAME.equals(cmd)) {

25	if (arg == null) {

26	throw new CommandSyntaxException("No tape number specified");

27

}

28

try {

29	return new LoadCommand(Integer.parseInt(arg));

30	} catch (NumberFormatException nfe) {

31	throw new CommandSyntaxException("Illegal tape number: " + arg);

32

}

33	} else if (PlayCommand.NAME.equals(cmd)) {

34	return new PlayCommand();

35	} else if (PauseCommand.NAME.equals(cmd)) {

36	return new PauseCommand();

37	} else if (StopCommand.NAME.equals(cmd)) {

38	return new StopCommand();

39	} else if (ListCommand.NAME.equals(cmd)) {

40	return new ListCommand();

41	} else if (EjectCommand.NAME.equals(cmd)) {

42	return new EjectCommand();

43	} else if (QuitCommand.NAME.equals(cmd)) {

44	return new QuitCommand();

45	} else if (InfoCommand.NAME.equals(cmd)) {

46	return new InfoCommand();

47

}

48

49	throw new CommandSyntaxException("Unknown command: " + cmd);

50

}

51

52

@Override

53	public void decode(IoSession session, IoBuffer in, final ProtocolDecoderOutput out)

54	throws Exception {

55

56	final LinkedList<String> lines = new LinkedList<String>();

57	super.decode(session, in, new ProtocolDecoderOutput() {

58	public void write(Object message) {

59	lines.add((String) message);

60

}

61	public void flush(NextFilter nextFilter, IoSession session) {}

62

});

63

64	for (String s: lines) {

65	out.write(parseCommand(s));

66

}

67

}

68

}

处理异常类：

01	package com.a2.desktop.example10.mina.statemachine;

02

03	import org.apache.mina.filter.codec.ProtocolDecoderException;

04

05

/**

06	* Exception thrown by CommandDecoder when a line cannot be decoded as a Command

07

* object.

08

*

09

*/

10	public class CommandSyntaxException extends ProtocolDecoderException {

11	private final String message;

12

13	public CommandSyntaxException(String message) {

14	super(message);

15	this.message = message;

16

}

17

18

@Override

19	public String getMessage() {

20	return message;

21

}

22

}

测试类：

view sourceprint?

01	package com.a2.desktop.example10.mina.statemachine;

02

03	import java.net.InetSocketAddress;

04

05	import org.apache.mina.core.service.IoHandler;

06	import org.apache.mina.filter.codec.ProtocolCodecFilter;

07	import org.apache.mina.filter.codec.textline.TextLineEncoder;

08	import org.apache.mina.filter.logging.LoggingFilter;

09	import org.apache.mina.statemachine.StateMachine;

10	import org.apache.mina.statemachine.StateMachineFactory;

11	import org.apache.mina.statemachine.StateMachineProxyBuilder;

12	import org.apache.mina.statemachine.annotation.IoHandlerTransition;

13	import org.apache.mina.statemachine.context.IoSessionStateContextLookup;

14	import org.apache.mina.statemachine.context.StateContext;

15	import org.apache.mina.statemachine.context.StateContextFactory;

16	import org.apache.mina.transport.socket.SocketAcceptor;

17	import org.apache.mina.transport.socket.nio.NioSocketAcceptor;

18

19	public class TestMain {

20	private static final int PORT = 8082;

21

22	private static IoHandler createIoHandler() {

23	StateMachine sm = StateMachineFactory.getInstance(

24	IoHandlerTransition.class).create(TapeDeckServer.EMPTY,

25	new TapeDeckServer());

26

27	return new StateMachineProxyBuilder().setStateContextLookup(

28	new IoSessionStateContextLookup(new StateContextFactory() {

29	public StateContext create() {

30	return new TapeDeckServer.TapeDeckContext();

31

}

32	})).create(IoHandler.class, sm);

33

}

34

35	public static void main(String[] args) throws Exception {

36	SocketAcceptor acceptor = new NioSocketAcceptor();

37	acceptor.setReuseAddress(true);

38	ProtocolCodecFilter pcf = new ProtocolCodecFilter(

39	new TextLineEncoder(), new CommandDecoder());

40	acceptor.getFilterChain().addLast("log1", new LoggingFilter("log1"));

41	acceptor.getFilterChain().addLast("codec", pcf);

42	acceptor.getFilterChain().addLast("log2", new LoggingFilter("log2"));

43	acceptor.setHandler(createIoHandler());

44	acceptor.bind(new InetSocketAddress(PORT));

45

}

46

}

启动测试类，用telnet去连，然后输入各种命令，效果如下：

更详细的代码可以参阅: org.apache.mina.example.tapedeck

代码其实都不难，只是我们需要灵活的将状态机这样的模式运用到自己的项目中去，通过状态之间的有规则的切换来控制更复杂的业务逻辑。