STM32F401

The STM32F401 line is the entry level to the STM32 F4 series. It is designed for medical, industrial and consumer applications requiring balanced performance and power efficiency with a high level of integration of embedded memories and peripherals inside packages as small as 3 x 3 mm, in the most cost-effective way. The STM32F401 offers the performance of the
Cortex™-M4 core (with floating point unit) running at 84 MHz while reaching outstanding power figures in Run and Stop modes.

Performance: At 84 MHz, the STM32F401 delivers 105 DMIPS/285 CoreMark performance executing from Flash memory, with 0-wait states using ST’s ART Accelerator. The DSP instructions and the floating point unit enlarge the range of addressable applications.

Power efficiency: ST’s 90 nm process, ART Accelerator and the dynamic power scaling enables the current consumption in run mode and executing from Flash memory to be as low as 137 µA/MHz. In Stop mode, the power consumption can be as low as 11 µA typical.

Connectivity: 

  • Audio: dedicated audio PLL and 2 full duplex I²S
  • Up to 11 communication interfaces (including 3x USARTs running at up to 10.5 Mbit/s, 4x SPI running at up to 42 Mbit/s, 3x I²C, SDIO)
  • 1x USB 2.0 OTG full speed
  • Analog: one 12-bit ADC reaching 2.4 MSPS
  • Up to 10 timers: 16- and 32-bit running at up to 84 MHz

Integration: The STM32F401 portfolio provides from 128 to 256 Kbytes of Flash, 64 Kbytes of SRAM and from 49 to 100 pins in packages as small as 3 x 3 mm.

 

Cost effective DSP with FPU, ARM Cortex-M4 MCU with 128 Kbytes Flash, 84 MHz CPU, Art Accelerator

The STM32F401xB/STM32F401xC device family is based on the high-performance ARM®Cortex™-M4 32-bit RISC core operating at a frequency of up to 84 MHz. Its Cortex-M4 with FPU core features a Floating point unit (FPU) single precision which supports all ARM single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.

STM32F401xB/STM32F401xC devices incorporate high-speed embedded memories (Flash memory up to 256 Kbytes, up to 64 Kbytes of SRAM) and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.

All devices offer one 12-bit ADC, a low-power RTC, six general-purpose 16-bit timers including one PWM timer for motor control, two general-purpose 32-bit timers. They also feature standard and advanced communication interfaces.

Key Features

  • Core: ARM 32-bit Cortex™-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 84 MHz, memory protection unit, 105 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
  • MemoriesUp to 256 Kbytes of Flash memoryUp to 64 Kbytes of SRAM
  • Clock, reset and supply management1.7 V (PDR OFF) or 1.8 V (PDR ON) to 3.6 V application supply and I/OsPOR, PDR, PVD and BOR4-to-26 MHz crystal oscillatorInternal 16 MHz factory-trimmed RC32 kHz oscillator for RTC with calibrationInternal 32 kHz RC with calibration
  • Power consumptionRun: 137 μA/MHz (peripheral off)Stop (Flash in Stop mode, fast wakeup time): 42 μA typ @ 25 °C; 65 μA max @25 °CStop (Flash in Deep power down mode, slow wakeup time): down to 10 μA typ@ 25 °C; 28 μA max @25 °CStandby: 2.4 μA @25 °C / 1.7 V without RTC; 12 μA @85 °C @1.7 VVBAT supply for RTC: 1 μA @25 °C
  • 1×12-bit, 2.4 MSPS A/D converter: up to 16 channels
  • General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support
  • Up to 10 timers: up to six 16-bit, two 32-bit timers up to 84 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window)
  • Debug modeSerial wire debug (SWD) & JTAG interfacesCortex-M4 Embedded Trace Macrocell™
  • Up to 81 I/O ports with interrupt capabilityAll IO ports 5 V tolerantUp to 78 fast I/Os up to 42 MHz
  • Up to 11 communication interfacesUp to 3 × I2C interfaces (1 Mbit/s, SMBus/PMBus)Up to 3 USARTs (2 x 10.5 Mbit/s, 1 x 5.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control)Up to 4 SPIs (up to 42 Mbits/s at fCPU= 84 MHz), SPI2 and SPI3 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clockSDIO interface
  • Advanced connectivityUSB 2.0 full-speed device/host/OTG controller with on-chip PHY
  • CRC calculation unit
  • 96-bit unique ID
  • RTC: subsecond accuracy, hardware calendar

ST推出业界领先的新款MCU STM32F401

[导读] 意法半导体扩大STM32F4系列，推出业界领先的新款微控制器STM32F401。低功耗，3x3mm微型封装，105°C环境温度，STM32F401适用于管理医疗和移动应用或现场总线驱动的工业传感器模块。

意法半导体扩大STM32F4系列，推出业界领先的新款微控制器。STM32F401是意法半导体基于ARM Cortex-M4 32位/DSP内核的STM32F4系列高性能微控制器的入门级产品。其运行频率低于其它STM32F4微控制器，但在性能、功耗和集成度之间取得完美均衡，以105DMIPS（84MHz）、137μA/MHz工作电流、11μA典型停止电流、丰富的集成功能领先于同级产品。

低功耗，3x3mm微型封装，105°C环境温度，STM32F401适用于管理医疗和移动应用或现场总线驱动的工业传感器模块。

STM32F401运用意法半导体独有的自适应实时（ART）加速器，实现从256KB片上闪存执行代码零等待状态。该产品集成12位16通道2.4Msample/s ADC，包括USB OTG、I2S、I2C、SPI在内的12个通信端口，电机控制定时器以及多个通用定时器。

10款全新STM32F401产品的加入使 STM32F4 产品组合增至90余款产品。STM32F401现已为主要OEM厂商提供样片，预计2013年第三季度开始量产，从3x3mm WLCSP到14x14mm LQFP100，共有5种封装可选。

 

posted @ 2013-09-12 14:53  IAmAProgrammer  阅读(1824)  评论(0)  编辑  收藏  举报