Hi Martin,
Support for the Nuvoton NUC1xx devices has been added in V4.69b of the J-Link software (beta).
Please note that the connector on the NuMicro SDK is non-standard and not compatible to anything we have seen so far.
We connected ICE_DAT, ICE_CLK, ICE_RST, GND and VTref (3.3V or 5V depending on how the board is jumpered) manually to J-Link to make it work.
Note that the 5V present on pin 1 of the connector on the board can NOT be used as VTref since there is a catch diode placed on the board which inhibits to provide supply to the buffers of J-Link. We recommend to get VTref from the jumper that is used to jumper between 3.3V and 5V.
Download-Link:
http://www.segger.com/jlink-software-beta-version.htmlBest regards
Alex
【推荐】国内首个AI IDE，深度理解中文开发场景，立即下载体验Trae
【推荐】编程新体验，更懂你的AI，立即体验豆包MarsCode编程助手
【推荐】抖音旗下AI助手豆包，你的智能百科全书，全免费不限次数
【推荐】轻量又高性能的 SSH 工具 IShell：AI 加持，快人一步
· Linux系列：如何用heaptrack跟踪.NET程序的非托管内存泄露
· 开发者必知的日志记录最佳实践
· SQL Server 2025 AI相关能力初探
· Linux系列：如何用 C#调用 C方法造成内存泄露
· AI与.NET技术实操系列（二）：开始使用ML.NET
· 被坑几百块钱后，我竟然真的恢复了删除的微信聊天记录！
· 【自荐】一款简洁、开源的在线白板工具 Drawnix
· 没有Manus邀请码？试试免邀请码的MGX或者开源的OpenManus吧
· 园子的第一款AI主题卫衣上架——"HELLO! HOW CAN I ASSIST YOU TODAY
· 无需6万激活码！GitHub神秘组织3小时极速复刻Manus，手把手教你使用OpenManus搭建本