Xilinx Platform Usb Cable

 

Key Features

• High-performance FPGA configuration and PROM/CPLD programming
  • Includes innovative FPGA-based acceleration firmware encapsulated in a small
    form factor pod attached to the cable
  • Supports JTAG and Slave-Serial programming topologies
  • Firmware downloadable over cable
• Easy to use
  • Fully integrated and optimized for use with Xilinx iMPACT software
  • Intuitive multiple cable management from a single application
  • Compatible with Windows and Linux operating systems
  • Automatically senses and adapts to target I/O voltage
  • Interfaces to devices operating at 5V (TTL), 3.3V (LVCMOS), 2.5V, 1.8V and 1.5V
  • Bus-powered USB device (no power supply required)
  • Flyleads compatible
  • Target power status LED
  • Firmware updates are transparent to the user
• Reliable
  • Backwards compatibility with Platform Cable USB, including Pb-Free (RoHS-compliant)
  • USB Integrators Forum (USB-IF) certified
  • CE and FCC compliant
  • Leverages industry standards, including JTAG Boundary-Scan IEEE 1149.1, SPI and USB 2.0
  • Compatible with Full-Speed and Hi-Speed USB ports
  • Programs and configures all Xilinx devices**
• Third-party PROM device programming support
  • Directly programs selected Serial Peripheral Interface (SPI) flash memory devices
  • Indirectly programs selected SPI or parallel flash memory devices via FPGA JTAG port
  • Highly optimized for use with Xilinx design tools - ISE® Foundation™ Software, Embedded Development Kit, ChipScope Pro Analyzer and System Generator for DSP.
• Pb-Free (RoHS-compliant)
• Recommended for prototyping use only

** Note: Xilinx iMPACT software is required for programming and configuration

 

 

Platform Cable USB 功能概述

• 采用CY7C68013A+XC2C256方案，与原装Platform Cable USB完全兼容
• 支持所有Xilinx器件下载，包括FPGA / CPLD / ISP Configuration PROM所有器件
• 支持JTAG / Slave Serial / SPI下载模式，可配置所有Xilinx器件
• 支持目标系统的下载接口电压：5V / 3.3V / 2.5V / 1.8V / 1.5V
• 支持Xilinx ISE / iMPACT / ChipScope
• 目标器件下载时钟可选，且支持XILINX软件的自动调速

支持的软件

• Xilinx ISE
• iMPACT
• ChipScope

支持的器件

• 支持所有Xilinx器件下载，包括FPGA / CPLD / ISP Configuration PROM所有器件

产品特性

• 采用CY7C68013A+XC2C256方案，与原装Platform Cable USB完全兼容

与PC机的连接

• 通过USB接口与计算机连接

与目标板的连接

• 通过 JTAG、Slave Serial、SPI 接口与目标板连接

硬件开发环境

通过Platform Cable USB连接“FPGA/CPLD目标板”和“PC”，建立完整的硬件开发环境，对目标芯片进行编程、调试

连接目标板

Platform Cable USB可以通过三种接口连接至目标板，接口定义如下:

Platform Cable USB状态灯说明

• 红紫色：接入了USB
• 紫色：接入了USB，且Vref有电供入（连接的开发板有上电）