013 IPv6
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ipv6 ?
access-list Configure access
lists
dhcp
Configure Ipv6 DHCP
general-prefix Configure a general IPv6 prefix
host
Configure static hostnames
local Specify
local options
nat
NAT-PT Configuration commands
neighbor
Neighbor
route
Configure static routes
router
Enable an IPV6 routing process
unicast-routing Enable unicast routing
Router(config)#ipv6 un
Router(config)#ipv6 unicast-routing
Router(config)#int f0/0
Router(config-if)#ipv6 add ?
WORD
General prefix name
X:X:X:X::X
IPv6 link-local address
X:X:X:X::X/<0-128> IPv6 prefix
autoconfig
Obtain address using autoconfiguration
Router(config-if)#ipv6 add 2001:1cc1:dddd:2::/64 eui-64
Router(config-if)#end
%SYS-5-CONFIG_I: Configured from console by console
Router#sh ipv6 int f0/0
FastEthernet0/0 is administratively down, line protocol is down
IPv6 is enabled, link-local address is FE80::202:17FF:FEB2:6001
[TEN]
No Virtual link-local address(es):
Global unicast address(es):
2001:1CC1:DDDD:2:202:17FF:FEB2:6001, subnet is
2001:1CC1:DDDD:2::/64 [EUI/TEN]
Joined group address(es):
FF02::1
FF02::2
FF02::1:FFB2:6001
MTU is 1500 bytes
ICMP error messages limited to one every 100 milliseconds
ICMP redirects are enabled
ICMP unreachables are sent
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
ND advertised reachable time is 0 milliseconds
ND advertised retransmit interval is 0 milliseconds
ND router advertisements are sent every 200 seconds
ND router advertisements live for 1800 seconds
ND advertised default router preference is Medium
Hosts use stateless autoconfig for addresses.
DNS server
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ipv6 host ?
WORD Name of host
Router(config)#ipv6 host yanjin ?
X:X:X:X::X IPv6 address
Router(config)#ipv6 host yanjin 2001:1CC1:DDDD:2:202:17FF:FEB2:6001 ?
X:X:X:X::X IPv6 address
<cr>
Router(config)#ipv6 host yanjin 2001:1CC1:DDDD:2:202:17FF:FEB2:6001
Router(config)#ip name-server 2001:1CC1:DDDD:2:202:17FF:FEB2:6001
Router(config)#
RIPng
Router(config)#ipv6 router rip ?
WORD User selected string identifying this process
Router(config)#ipv6 router rip RIPPROC1
Router(config-rtr)#int f0/0
Router(config-if)#ipv6 rip RIPPROC1 enable
Router(config-if)#do sh ipv6 rip
sh ipv6 rip
% Incomplete command.
Router(config-if)#end
%SYS-5-CONFIG_I: Configured from console by console
Router#sh ipv6 rip
% Incomplete command.
Router#sh ipv6 rip ?
database RIP local RIB
Router#sh ipv6 rip d
Router#sh ipv6 rip database
RIP process "RIPPROC1" local RIB
Router#
