采用二进制方式安装K8S集群，版本etcd-v3.3.10，flannel-v0.11.0，kubernetes-server-linux-amd64

官方提供的几种Kubernetes部署方式

  • minikube

Minikube是一个工具，可以在本地快速运行一个单点的Kubernetes，尝试Kubernetes或日常开发的用户使用。不能用于生产环境。

官方地址：https://kubernetes.io/docs/setup/minikube/

  • kubeadm

Kubeadm也是一个工具，提供kubeadm init和kubeadm join，用于快速部署Kubernetes集群。

官方地址：https://kubernetes.io/docs/reference/setup-tools/kubeadm/kubeadm/

  • 二进制包

从官方下载发行版的二进制包，手动部署每个组件，组成Kubernetes集群。

小结：
生产环境中部署Kubernetes集群，只有Kubeadm和二进制包可选，Kubeadm降低部署门槛，但屏蔽了很多细节，遇到问题很难排查。我们这里使用二进制包部署Kubernetes集群，我也是推荐大家使用这种方式，虽然手动部署麻烦点，但学习很多工作原理，更有利于后期维护。

环境介绍

软件环境
软件 版本
操作系统 CentOS 7.6_x64
Docker 18-ce
Kubernetes 1.12

服务器角色
角色 IP 组件
master 192.168.75.64 kube-apiserver，kube-controller-manager，kube-scheduler，etcd
node1 192.168.75.65 kubelet，kube-proxy，docker，flannel，etcd
node2 192.168.75.66 kubelet，kube-proxy，docker，flannel，etcd

初始化：
关闭selinux
关闭防火墙

组件 使用的证书
etcd ca.pem，server.pem，server-key.pem
flannel ca.pem，server.pem，server-key.pem
kube-apiserver ca.pem，server.pem，server-key.pem
kubelet ca.pem，ca-key.pem
kube-proxy ca.pem，kube-proxy.pem，kube-proxy-key.pem
kubectl ca.pem，admin.pem，admin-key.pem

注意事项：
三台主机的时间要尽可能的同步，保持一致，否则日志中会出现如下提示：

Nov  1 09:13:42 bogon etcd: the clock difference against peer e4ba0635cb718aa3 is too high [1.321146676s > 1s]
Nov  1 09:13:42 bogon etcd: the clock difference against peer e4ba0635cb718aa3 is too high [1.316524004s > 1s]
Nov  1 09:13:57 bogon etcd: the clock difference against peer a3174a13e9f88ee8 is too high [1.139050363s > 1s]
Nov  1 09:13:57 bogon etcd: the clock difference against peer a3174a13e9f88ee8 is too high [1.143273312s > 1s]

三台主机使用公共的同步时间服务器，或者指定其中一台服务器作为同步时间服务器，另外两台从这台进行时间同步

time.windows.com

再注意：
flannel v0.11 不支持etcd v3用法

部署Etcd集群

三台主机都需要部署etcd

1. 使用cfssl来生成自签证书，先下载cfssl工具：

使用shell脚本：cfssl.sh

或者手动执行如下命令

wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64
chmod +x cfssl_linux-amd64 cfssljson_linux-amd64 cfssl-certinfo_linux-amd64
mv cfssl_linux-amd64 /usr/local/bin/cfssl
mv cfssljson_linux-amd64 /usr/local/bin/cfssljson
mv cfssl-certinfo_linux-amd64 /usr/bin/cfssl-certinfo

这三个命令保存压缩包：cfssl证书生成命令.7z

2. 生成证书

使用shell脚本：etcd-cert.sh

或者手动执行如下命令

创建以下三个文件：

# cat ca-config.json
{
  "signing": {
    "default": {
      "expiry": "87600h"
    },
    "profiles": {
      "www": {
         "expiry": "87600h",
         "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ]
      }
    }
  }
}

# cat ca-csr.json
{
    "CN": "etcd CA",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "Beijing",
            "ST": "Beijing"
        }
    ]
}

# cat server-csr.json
# 注意： hosts主机参数要根据实际情况进行修改
{
    "CN": "etcd",
    "hosts": [
    "192.168.75.64",
    "192.168.75.65",
    "192.168.75.66"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "BeiJing",
            "ST": "BeiJing"
        }
    ]
}


# 生成证书
cfssl gencert -initca ca-csr.json | cfssljson -bare ca -
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=www server-csr.json | cfssljson -bare server

# 查看证书
# ls *pem
ca-key.pem  ca.pem  server-key.pem  server.pem

证书这块知道怎么生成、怎么用即可，建议暂时不必过多研究

3. 部署Etcd

二进制包下载地址：https://github.com/coreos/etcd/releases

以下部署步骤在规划的三个etcd节点操作一样，唯一不同的是etcd配置文件中的服务器IP要写当前的，ETCD_NAME也要写当前的

# 解压二进制包
mkdir /opt/etcd/{bin,cfg,ssl} -p
tar zxvf etcd-v3.3.10-linux-amd64.tar.gz
cp etcd-v3.3.10-linux-amd64/{etcd,etcdctl} /opt/etcd/bin/

# 创建etcd配置文件

# cat /opt/etcd/cfg/etcd

#[Member]
ETCD_NAME="etcd01"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.75.64:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.75.64:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.75.64:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.75.64:2379"
ETCD_INITIAL_CLUSTER="etcd01=https://192.168.75.64:2380,etcd02=https://192.168.75.65:2380,etcd03=https://192.168.75.66:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

#[Security]
ETCD_CERT_FILE="/opt/etcd/ssl/server.pem"
ETCD_KEY_FILE="/opt/etcd/ssl/server-key.pem"
ETCD_TRUSTED_CA_FILE="/opt/etcd/ssl/ca.pem"
ETCD_CLIENT_CERT_AUTH="true"
ETCD_PEER_CERT_FILE="/opt/etcd/ssl/server.pem"
ETCD_PEER_KEY_FILE="/opt/etcd/ssl/server-key.pem"
ETCD_PEER_TRUSTED_CA_FILE="/opt/etcd/ssl/ca.pem"
ETCD_PEER_CLIENT_CERT_AUTH="true"

etcd配置文件说明：

  • ETCD_NAME 节点名称
  • ETCD_DATA_DIR 数据目录
  • ETCD_LISTEN_PEER_URLS 集群通信监听地址
  • ETCD_LISTEN_CLIENT_URLS 客户端访问监听地址
  • ETCD_INITIAL_ADVERTISE_PEER_URLS 集群通告地址
  • ETCD_ADVERTISE_CLIENT_URLS 客户端通告地址
  • ETCD_INITIAL_CLUSTER 集群节点地址
  • ETCD_INITIAL_CLUSTER_TOKEN 集群Token
  • ETCD_INITIAL_CLUSTER_STATE 加入集群的当前状态，new是新集群，existing表示加入已有集群
# systemd管理etcd

# cat /usr/lib/systemd/system/etcd.service 
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=/opt/etcd/cfg/etcd
ExecStart=/opt/etcd/bin/etcd
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

# 把刚才生成的证书拷贝到配置文件中的位置
cp ca.pem server*pem /opt/etcd/ssl

# 启动并设置开启启动：
systemctl start etcd
systemctl enable etcd

ssh-keygen -t rsa
ssh-copy-id -i ~/.ssh/id_rsa.pub root@192.168.75.65
ssh-copy-id -i ~/.ssh/id_rsa.pub root@192.168.75.66

# 传输给其他node节点

# 需要修改配置文件
scp -r /opt/etcd/ root@192.168.75.65:/opt/
scp -r /opt/etcd/ root@192.168.75.66:/opt/


scp /usr/lib/systemd/system/etcd.service root@192.168.75.65:/usr/lib/systemd/system/
scp /usr/lib/systemd/system/etcd.service root@192.168.75.66:/usr/lib/systemd/system/

# 启动
systemctl daemon-reload
systemctl start etcd
systemctl enable etcd

# 三个配置文件示例

# 192.168.75.64
#[Member]
ETCD_NAME="etcd01"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.75.64:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.75.64:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.75.64:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.75.64:2379"
ETCD_INITIAL_CLUSTER="etcd01=https://192.168.75.64:2380,etcd02=https://192.168.75.65:2380,etcd03=https://192.168.75.66:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

#[Security]
ETCD_CERT_FILE="/opt/etcd/ssl/server.pem"
ETCD_KEY_FILE="/opt/etcd/ssl/server-key.pem"
ETCD_TRUSTED_CA_FILE="/opt/etcd/ssl/ca.pem"
ETCD_CLIENT_CERT_AUTH="true"
ETCD_PEER_CERT_FILE="/opt/etcd/ssl/server.pem"
ETCD_PEER_KEY_FILE="/opt/etcd/ssl/server-key.pem"
ETCD_PEER_TRUSTED_CA_FILE="/opt/etcd/ssl/ca.pem"
ETCD_PEER_CLIENT_CERT_AUTH="true"

# 192.168.75.65
#[Member]
ETCD_NAME="etcd02"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.75.65:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.75.65:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.75.65:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.75.65:2379"
ETCD_INITIAL_CLUSTER="etcd01=https://192.168.75.64:2380,etcd02=https://192.168.75.65:2380,etcd03=https://192.168.75.66:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

#[Security]
ETCD_CERT_FILE="/opt/etcd/ssl/server.pem"
ETCD_KEY_FILE="/opt/etcd/ssl/server-key.pem"
ETCD_TRUSTED_CA_FILE="/opt/etcd/ssl/ca.pem"
ETCD_CLIENT_CERT_AUTH="true"
ETCD_PEER_CERT_FILE="/opt/etcd/ssl/server.pem"
ETCD_PEER_KEY_FILE="/opt/etcd/ssl/server-key.pem"
ETCD_PEER_TRUSTED_CA_FILE="/opt/etcd/ssl/ca.pem"
ETCD_PEER_CLIENT_CERT_AUTH="true"

# 192.168.75.66
#[Member]
ETCD_NAME="etcd03"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.75.66:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.75.66:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.75.66:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.75.66:2379"
ETCD_INITIAL_CLUSTER="etcd01=https://192.168.75.64:2380,etcd02=https://192.168.75.65:2380,etcd03=https://192.168.75.66:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

#[Security]
ETCD_CERT_FILE="/opt/etcd/ssl/server.pem"
ETCD_KEY_FILE="/opt/etcd/ssl/server-key.pem"
ETCD_TRUSTED_CA_FILE="/opt/etcd/ssl/ca.pem"
ETCD_CLIENT_CERT_AUTH="true"
ETCD_PEER_CERT_FILE="/opt/etcd/ssl/server.pem"
ETCD_PEER_KEY_FILE="/opt/etcd/ssl/server-key.pem"
ETCD_PEER_TRUSTED_CA_FILE="/opt/etcd/ssl/ca.pem"
ETCD_PEER_CLIENT_CERT_AUTH="true"

# 都部署完成后，检查etcd集群状态

/opt/etcd/bin/etcdctl --ca-file=/opt/etcd/ssl/ca.pem --cert-file=/opt/etcd/ssl/server.pem --key-file=/opt/etcd/ssl/server-key.pem --endpoints="https://192.168.75.64:2379,https://192.168.75.65:2379,https://192.168.75.66:2379" cluster-health


member a3174a13e9f88ee8 is healthy: got healthy result from https://192.168.75.65:2379
member d6f32b054860cf2b is healthy: got healthy result from https://192.168.75.64:2379
member e4ba0635cb718aa3 is healthy: got healthy result from https://192.168.75.66:2379
cluster is healthy

# 若是提示各种命令参数找不到，可以使用/opt/etcd/bin/etcdctl --help命令查看后面的参数
# 不同的etcd版本后面跟的参数有可能不一样

如果输出上面信息，就说明集群部署成功。如果有问题第一步先看日志：/var/log/message 或 journalctl -u etcd

在Node安装Docker

在node1和node2主机节点部署Docker

wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo -O /etc/yum.repos.d/docker-ce.repo
yum install -y yum-utils device-mapper-persistent-data lvm2
# K8S不支持最高版本的Docker，需要指定docker版本
yum -y install docker-ce-18.06.1.ce-3.el7

systemctl start docker && systemctl enable docker

这个操作步骤随便一个主机上操作就行，目的是往etcd集群中写入数据
(使用etcdctl v3.4.3命令会得到不同的返回结果)

# Falnnel要用etcd存储自身一个子网信息，所以要保证能成功连接Etcd，写入预定义子网段
/opt/etcd/bin/etcdctl --ca-file=/opt/etcd/ssl/ca.pem --cert-file=/opt/etcd/ssl/server.pem --key-file=/opt/etcd/ssl/server-key.pem --endpoints="https://192.168.75.64:2379,https://192.168.75.65:2379,https://192.168.75.66:2379" set /coreos.com/network/config  '{ "Network": "172.17.0.0/16", "Backend": {"Type": "vxlan"}}'

{"Network":"172.17.0.0/16","Backend":{"Type":"vxlan"}}

# 查看
/opt/etcd/bin/etcdctl --ca-file=/opt/etcd/ssl/ca.pem --cert-file=/opt/etcd/ssl/server.pem --key-file=/opt/etcd/ssl/server-key.pem --endpoints="https://192.168.75.64:2379,https://192.168.75.65:2379,https://192.168.75.66:2379" get /coreos.com/network/config  

{"Network":"172.17.0.0/16","Backend":{"Type":"vxlan"}}

# 删除
/opt/etcd/bin/etcdctl --ca-file=/opt/etcd/ssl/ca.pem --cert-file=/opt/etcd/ssl/server.pem --key-file=/opt/etcd/ssl/server-key.pem --endpoints="https://192.168.75.64:2379,https://192.168.75.65:2379,https://192.168.75.66:2379" del /coreos.com/network/config

以下部署步骤在规划的每个node节点都操作

wget https://github.com/coreos/flannel/releases/download/v0.11.0/flannel-v0.11.0-linux-amd64.tar.gz
tar zxvf flannel-v0.11.0-linux-amd64.tar.gz
mkdir -p /opt/flannel/{bin,cfg}
cp flanneld mk-docker-opts.sh /opt/flannel/bin

使用脚本：

或者执行如下命令操作：flannel.sh
脚本用法：bash flannel.sh https://192.168.75.64:2379,https://192.168.75.65:2379,https://192.168.75.66:2379

# 配置Flannel

# cat /opt/flannel/cfg/flanneld
FLANNEL_OPTIONS="--etcd-endpoints=https://192.168.75.64:2379,https://192.168.75.65:2379,https://192.168.75.66:2379 -etcd-cafile=/opt/etcd/ssl/ca.pem -etcd-certfile=/opt/etcd/ssl/server.pem -etcd-keyfile=/opt/etcd/ssl/server-key.pem"

# 使用systemd管理Flannel

# cat /usr/lib/systemd/system/flanneld.service 
[Unit]
Description=Flanneld overlay address etcd agent
After=network-online.target network.target
Before=docker.service

[Service]
Type=notify
EnvironmentFile=/opt/flannel/cfg/flanneld
ExecStart=/opt/flannel/bin/flanneld --ip-masq $FLANNEL_OPTIONS
ExecStartPost=/opt/flannel/bin/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/subnet.env
Restart=on-failure

[Install]
WantedBy=multi-user.target

# 修改docker.service文件，结果如下：

# 配置Docker启动指定子网段

# cat /usr/lib/systemd/system/docker.service
[Unit]
Description=Docker Application Container Engine
Documentation=https://docs.docker.com
After=network-online.target firewalld.service
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=/run/flannel/subnet.env
ExecStart=/usr/bin/dockerd $DOCKER_NETWORK_OPTIONS
ExecReload=/bin/kill -s HUP $MAINPID
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
TimeoutStartSec=0
Delegate=yes
KillMode=process
Restart=on-failure
StartLimitBurst=3
StartLimitInterval=60s

[Install]
WantedBy=multi-user.target


# 重启flannel和docker

systemctl daemon-reload
systemctl start flanneld
systemctl enable flanneld

systemctl restart docker

# 检查是否生效

# 确保docker0与flannel.1在同一网段

# ps -ef | grep docker
root       6879      1  0 14:14 ?        00:00:01 /usr/bin/dockerd --bip=172.17.69.1/24 --ip-masq=false --mtu=1450

# ip addr
3: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default 
    link/ether 02:42:77:67:ce:78 brd ff:ff:ff:ff:ff:ff
    inet 172.17.69.1/24 brd 172.17.69.255 scope global docker0
       valid_lft forever preferred_lft forever
4: flannel.1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UNKNOWN group default 
    link/ether 52:96:0d:2d:ab:08 brd ff:ff:ff:ff:ff:ff
    inet 172.17.69.0/32 scope global flannel.1
       valid_lft forever preferred_lft forever
    inet6 fe80::5096:dff:fe2d:ab08/64 scope link 
       valid_lft forever preferred_lft forever

测试不同节点互通：

  • 节点到容器
  • 容器到节点
  • 容器到容器
# node1节点ping本机docker ip
# ping -c 3 172.17.69.1
PING 172.17.69.1 (172.17.69.1) 56(84) bytes of data.
64 bytes from 172.17.69.1: icmp_seq=1 ttl=64 time=0.055 ms
64 bytes from 172.17.69.1: icmp_seq=2 ttl=64 time=0.030 ms
64 bytes from 172.17.69.1: icmp_seq=3 ttl=64 time=0.034 ms

--- 172.17.69.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2000ms
rtt min/avg/max/mdev = 0.030/0.039/0.055/0.013 ms

# docker内容器ping node1本机ip
# 拉取一个最简单的镜像busybox
# docker run -it busybox 
Unable to find image 'busybox:latest' locally
latest: Pulling from library/busybox
0f8c40e1270f: Pull complete 
Digest: sha256:1303dbf110c57f3edf68d9f5a16c082ec06c4cf7604831669faf2c712260b5a0
Status: Downloaded newer image for busybox:latest
/ # ip addr # 查看172.17.69.2容器使用的ip
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
5: eth0@if6: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1450 qdisc noqueue 
    link/ether 02:42:ac:11:45:02 brd ff:ff:ff:ff:ff:ff
    inet 172.17.69.2/24 brd 172.17.69.255 scope global eth0
       valid_lft forever preferred_lft forever
/ # ping 192.168.75.65 -c 3 # ping 本机ip
PING 192.168.75.65 (192.168.75.65): 56 data bytes
64 bytes from 192.168.75.65: seq=0 ttl=64 time=0.168 ms
64 bytes from 192.168.75.65: seq=1 ttl=64 time=0.056 ms
64 bytes from 192.168.75.65: seq=2 ttl=64 time=0.063 ms

--- 192.168.75.65 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 0.056/0.095/0.168 ms
/ # ping -c 3 192.168.75.66 # ping node2节点的ip
PING 192.168.75.66 (192.168.75.66): 56 data bytes
64 bytes from 192.168.75.66: seq=0 ttl=63 time=0.609 ms
64 bytes from 192.168.75.66: seq=1 ttl=63 time=0.434 ms
64 bytes from 192.168.75.66: seq=2 ttl=63 time=0.315 ms

--- 192.168.75.66 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 0.315/0.452/0.609 ms
/ #

在Master节点部署组件

在部署Kubernetes之前一定要确保etcd、flannel、docker是正常工作的，否则先解决问题再继续.

使用脚本：k8s-cert.sh

或者使用如下命令操作生成证书

# 生成证书

# 创建CA证书
# cat ca-config.json
{
  "signing": {
    "default": {
      "expiry": "87600h"
    },
    "profiles": {
      "kubernetes": {
         "expiry": "87600h",
         "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ]
      }
    }
  }
}

# cat ca-csr.json
{
    "CN": "kubernetes",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "Beijing",
            "ST": "Beijing",
            "O": "k8s",
            "OU": "System"
        }
    ]
}

cfssl gencert -initca ca-csr.json | cfssljson -bare ca -

# 生成apiserver证书

# cat server-csr.json
{
    "CN": "kubernetes",
    "hosts": [
      "10.0.0.1",
      "127.0.0.1",
      "192.168.75.64",
      "kubernetes",
      "kubernetes.default",
      "kubernetes.default.svc",
      "kubernetes.default.svc.cluster",
      "kubernetes.default.svc.cluster.local"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "BeiJing",
            "ST": "BeiJing",
            "O": "k8s",
            "OU": "System"
        }
    ]
}

cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes server-csr.json | cfssljson -bare server

# 生成kube-proxy证书

# cat kube-proxy-csr.json
{
  "CN": "system:kube-proxy",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "L": "BeiJing",
      "ST": "BeiJing",
      "O": "k8s",
      "OU": "System"
    }
  ]
}

cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy

# 最终生成以下证书文件

# ls *.pem
ca-key.pem  ca.pem  kube-proxy-key.pem  kube-proxy.pem  server-key.pem  server.pem

部署apiserver组件


# 下载二进制包：https://github.com/kubernetes/kubernetes/releases
# 下载这个包（kubernetes-server-linux-amd64.tar.gz）就够了，包含了所需的所有组件。

mkdir /opt/kubernetes/{bin,cfg,ssl} -p
tar zxvf kubernetes-server-linux-amd64.tar.gz
cd kubernetes/server/bin
cp kube-apiserver kube-scheduler kube-controller-manager kubectl /opt/kubernetes/bin

# 创建token文件

cat /opt/kubernetes/cfg/token.csv
674c457d4dcf2eefe4920d7dbb6b0ddc,kubelet-bootstrap,10001,"system:kubelet-bootstrap"

# 第一列：随机字符串，自己可生成
# 第二列：用户名
# 第三列：UID
# 第四列：用户组

# 创建apiserver配置文件
# 配置好前面生成的证书，确保能连接etcd
cat /opt/kubernetes/cfg/kube-apiserver
KUBE_APISERVER_OPTS="--logtostderr=true \
--v=4 \
--etcd-servers=https://192.168.75.64:2379,https://192.168.75.65:2379,https://192.168.75.66:2379 \
--bind-address=192.168.75.64 \
--secure-port=6443 \
--advertise-address=192.168.75.64 \
--allow-privileged=true \
--service-cluster-ip-range=10.0.0.0/24 \
--enable-admission-plugins=NamespaceLifecycle,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota,NodeRestriction \
--authorization-mode=RBAC,Node \
--enable-bootstrap-token-auth \
--token-auth-file=/opt/kubernetes/cfg/token.csv \
--service-node-port-range=30000-50000 \
--tls-cert-file=/opt/kubernetes/ssl/server.pem  \
--tls-private-key-file=/opt/kubernetes/ssl/server-key.pem \
--client-ca-file=/opt/kubernetes/ssl/ca.pem \
--service-account-key-file=/opt/kubernetes/ssl/ca-key.pem \
--etcd-cafile=/opt/etcd/ssl/ca.pem \
--etcd-certfile=/opt/etcd/ssl/server.pem \
--etcd-keyfile=/opt/etcd/ssl/server-key.pem"

参数说明：

  • logtostderr 启用日志
  • -v 日志等级
  • etcd-servers etcd集群地址
  • bind-address 监听地址
  • secure-port https安全端口
  • advertise-address 集群通告地址
  • allow-privileged 启用授权
  • service-cluster-ip-range Service虚拟IP地址段
  • enable-admission-plugins 准入控制模块
  • authorization-mode 认证授权，启用RBAC授权和节点自管理
  • enable-bootstrap-token-auth 启用TLS bootstrap功能，后面会讲到
  • token-auth-file token文件
  • service-node-port-range Service Node类型默认分配端口范围
# systemd管理apiserver

# cat /usr/lib/systemd/system/kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/opt/kubernetes/cfg/kube-apiserver
ExecStart=/opt/kubernetes/bin/kube-apiserver $KUBE_APISERVER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target

# 启动
systemctl daemon-reload
systemctl enable kube-apiserver
systemctl start kube-apiserver

部署scheduler组件

# 创建schduler配置文件

# cat /opt/kubernetes/cfg/kube-scheduler
KUBE_SCHEDULER_OPTS="--logtostderr=true \
--v=4 \
--master=127.0.0.1:8080 \
--leader-elect"

参数说明：

  • --master 连接本地apiserver
  • --leader-elect 当该组件启动多个时，自动选举（HA）
# systemd管理schduler组件
# cat /usr/lib/systemd/system/kube-scheduler.service
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/opt/kubernetes/cfg/kube-scheduler
ExecStart=/opt/kubernetes/bin/kube-scheduler $KUBE_SCHEDULER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target

# 启动
systemctl daemon-reload
systemctl enable kube-scheduler
systemctl start kube-scheduler

部署controller-manager组件

# 创建controller-manager配置文件

# cat /opt/kubernetes/cfg/kube-controller-manager
KUBE_CONTROLLER_MANAGER_OPTS="--logtostderr=true \
--v=4 \
--master=127.0.0.1:8080 \
--leader-elect=true \
--address=127.0.0.1 \
--service-cluster-ip-range=10.0.0.0/24 \
--cluster-name=kubernetes \
--cluster-signing-cert-file=/opt/kubernetes/ssl/ca.pem \
--cluster-signing-key-file=/opt/kubernetes/ssl/ca-key.pem  \
--root-ca-file=/opt/kubernetes/ssl/ca.pem \
--service-account-private-key-file=/opt/kubernetes/ssl/ca-key.pem"

# systemd管理controller-manager组件

# cat /usr/lib/systemd/system/kube-controller-manager.service
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/opt/kubernetes/cfg/kube-controller-manager
ExecStart=/opt/kubernetes/bin/kube-controller-manager $KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target


# 启动
systemctl daemon-reload
systemctl enable kube-controller-manager
systemctl start kube-controller-manager

所有组件都已经启动成功，通过kubectl工具查看当前集群组件状态:

# /opt/kubernetes/bin/kubectl get cs
NAME                 STATUS    MESSAGE             ERROR
controller-manager   Healthy   ok                  
scheduler            Healthy   ok                  
etcd-2               Healthy   {"health":"true"}   
etcd-0               Healthy   {"health":"true"}   
etcd-1               Healthy   {"health":"true"} 

# 如上输出说明组件都正常

或者分别执行master目录下的sh脚本文件，注意脚本执行时需要参数

在Node节点部署组件

Master apiserver启用TLS认证后，Node节点kubelet组件想要加入集群，必须使用CA签发的有效证书才能与apiserver通信，当Node节点很多时，签署证书是一件很繁琐的事情，因此有了TLS Bootstrapping机制，kubelet会以一个低权限用户自动向apiserver申请证书，kubelet的证书由apiserver动态签署。

# 将kubelet-bootstrap用户绑定到系统集群角色

/opt/kubernetes/bin/kubectl create clusterrolebinding kubelet-bootstrap --clusterrole=system:node-bootstrapper --user=kubelet-bootstrap

# 执行结果
clusterrolebinding.rbac.authorization.k8s.io/kubelet-bootstrap created

# 创建kubeconfig文件

# 在生成kubernetes证书的目录下执行以下命令生成kubeconfig文件
# 创建kubelet bootstrapping kubeconfig 
cd /opt/k8s_2
# 执行如下两个命令
BOOTSTRAP_TOKEN=674c457d4dcf2eefe4920d7dbb6b0ddc
KUBE_APISERVER="https://192.168.75.64:6443"

# 设置集群参数
/opt/kubernetes/bin/kubectl config set-cluster kubernetes --certificate-authority=./ca.pem --embed-certs=true --server=${KUBE_APISERVER} --kubeconfig=bootstrap.kubeconfig
# 执行结果
Cluster "kubernetes" set.

# 设置客户端认证参数
/opt/kubernetes/bin/kubectl config set-credentials kubelet-bootstrap --token=${BOOTSTRAP_TOKEN} --kubeconfig=bootstrap.kubeconfig
# 执行结果
User "kubelet-bootstrap" set.

# 设置上下文参数
/opt/kubernetes/bin/kubectl config set-context default --cluster=kubernetes --user=kubelet-bootstrap --kubeconfig=bootstrap.kubeconfig
# 执行结果
Context "default" created.

# 设置默认上下文
/opt/kubernetes/bin/kubectl config use-context default --kubeconfig=bootstrap.kubeconfig
# 执行结果
Switched to context "default".

# 创建kube-proxy kubeconfig文件
/opt/kubernetes/bin/kubectl config set-cluster kubernetes --certificate-authority=./ca.pem --embed-certs=true --server=${KUBE_APISERVER} --kubeconfig=kube-proxy.kubeconfig
# 执行结果
Cluster "kubernetes" set.

/opt/kubernetes/bin/kubectl config set-credentials kube-proxy --client-certificate=./kube-proxy.pem --client-key=./kube-proxy-key.pem --embed-certs=true --kubeconfig=kube-proxy.kubeconfig
# 执行结果
User "kube-proxy" set.

/opt/kubernetes/bin/kubectl config set-context default --cluster=kubernetes --user=kube-proxy --kubeconfig=kube-proxy.kubeconfig
# 执行结果
Context "default" created.

/opt/kubernetes/bin/kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig
# 执行结果
Switched to context "default".

# ls
bootstrap.kubeconfig  kube-proxy.kubeconfig
# 将这两个文件拷贝到Node节点/opt/kubernetes/cfg目录下

部署kubelet组件

将前面下载的二进制包中的kubelet和kube-proxy拷贝到/opt/kubernetes/bin目录下

cd /opt/k8s_2/kubernetes/server/bin/
cp kubelet kube-proxy /opt/kubernetes/bin/

# 创建kubelet配置文件
# cat /opt/kubernetes/cfg/kubelet
KUBELET_OPTS="--logtostderr=true \
--v=4 \
--hostname-override=192.168.75.65 \
--kubeconfig=/opt/kubernetes/cfg/kubelet.kubeconfig \
--bootstrap-kubeconfig=/opt/kubernetes/cfg/bootstrap.kubeconfig \
--config=/opt/kubernetes/cfg/kubelet.config \
--cert-dir=/opt/kubernetes/ssl \
--pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google-containers/pause-amd64:3.0"


# 其中/opt/kubernetes/cfg/kubelet.config配置文件如下：
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
address: 192.168.75.65
port: 10250
readOnlyPort: 10255
cgroupDriver: cgroupfs
clusterDNS: ["10.0.0.2"]
clusterDomain: cluster.local.
failSwapOn: false
authentication:
  anonymous:
    enabled: true


# systemd管理kubelet组件
# cat /usr/lib/systemd/system/kubelet.service 
[Unit]
Description=Kubernetes Kubelet
After=docker.service
Requires=docker.service

[Service]
EnvironmentFile=/opt/kubernetes/cfg/kubelet
ExecStart=/opt/kubernetes/bin/kubelet $KUBELET_OPTS
Restart=on-failure
KillMode=process

[Install]
WantedBy=multi-user.target

# 启动
systemctl daemon-reload
systemctl enable kubelet
systemctl start kubelet

参数说明：

  • --hostname-override 在集群中显示的主机名
  • --kubeconfig 指定kubeconfig文件位置，会自动生成
  • --bootstrap-kubeconfig 指定刚才生成的bootstrap.kubeconfig文件
  • --cert-dir 颁发证书存放位置
  • --pod-infra-container-image 管理Pod网络的镜像

在Master审批Node加入集群

# 启动后还没加入到集群中，需要手动允许该节点才可以。在Master节点查看请求签名的Node：
[root@bogon cfg]# /opt/kubernetes/bin/kubectl get csr
NAME                                                   AGE   REQUESTOR           CONDITION
node-csr-5O5xP__kXZ1UaDABvbe9u90WrV1EMwEYRYYeFLtO-7w   48s   kubelet-bootstrap   Pending

[root@bogon cfg]# /opt/kubernetes/bin/kubectl certificate approve node-csr-5O5xP__kXZ1UaDABvbe9u90WrV1EMwEYRYYeFLtO-7w
certificatesigningrequest.certificates.k8s.io/node-csr-5O5xP__kXZ1UaDABvbe9u90WrV1EMwEYRYYeFLtO-7w approved

[root@bogon cfg]# /opt/kubernetes/bin/kubectl get node
NAME            STATUS   ROLES    AGE   VERSION
192.168.75.65   Ready    <none>   12s   v1.12.1
[root@bogon cfg]#

部署kube-proxy组件

# 创建kube-proxy配置文件
# cat /opt/kubernetes/cfg/kube-proxy
KUBE_PROXY_OPTS="--logtostderr=true \
--v=4 \
--hostname-override=192.168.75.65 \
--cluster-cidr=10.0.0.0/24 \
--kubeconfig=/opt/kubernetes/cfg/kube-proxy.kubeconfig"

# systemd管理kube-proxy组件
# cat /usr/lib/systemd/system/kube-proxy.service
[Unit]
Description=Kubernetes Proxy
After=network.target

[Service]
EnvironmentFile=-/opt/kubernetes/cfg/kube-proxy
ExecStart=/opt/kubernetes/bin/kube-proxy $KUBE_PROXY_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target


# 启动
systemctl daemon-reload
systemctl enable kube-proxy
systemctl start kube-proxy

Node2部署方式一样
需要注意的是配置文件中的IP地址需要换成当前使用的

查看集群状态

# 在master主机上查看
/opt/kubernetes/bin/kubectl get node
NAME            STATUS   ROLES    AGE     VERSION
192.168.75.65   Ready    <none>   14m     v1.12.1
192.168.75.66   Ready    <none>   2m54s   v1.12.1

# 在node主机上查看会出现这样的结果：The connection to the server localhost:8080 was refused - did you specify the right host or port?

/opt/kubernetes/bin/kubectl get cs
NAME                 STATUS    MESSAGE             ERROR
scheduler            Healthy   ok                  
etcd-1               Healthy   {"health":"true"}   
etcd-0               Healthy   {"health":"true"}   
controller-manager   Healthy   ok                  
etcd-2               Healthy   {"health":"true"}

运行一个测试示例

# 创建一个Nginx Web，测试集群是否正常工作
/opt/kubernetes/bin/kubectl run nginx --image=nginx --replicas=3
# 执行结果
kubectl run --generator=deployment/apps.v1beta1 is DEPRECATED and will be removed in a future version. Use kubectl create instead.
deployment.apps/nginx created


/opt/kubernetes/bin/kubectl expose deployment nginx --port=88 --target-port=80 --type=NodePort
# 执行结果
service/nginx exposed

# 查看Pod，Service
/opt/kubernetes/bin/kubectl get pods
# 执行结果
NAME                    READY   STATUS    RESTARTS   AGE
nginx-dbddb74b8-4bd8v   1/1     Running   0          90s
nginx-dbddb74b8-5kjns   1/1     Running   0          90s
nginx-dbddb74b8-tbzhl   1/1     Running   0          90s

/opt/kubernetes/bin/kubectl get svc
# 执行结果
NAME         TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)        AGE
kubernetes   ClusterIP   10.0.0.1     <none>        443/TCP        100m
nginx        NodePort    10.0.0.116   <none>        88:37027/TCP   66s

# 访问集群中部署的Nginx，打开浏览器输入：http://192.168.75.65:37027 或者http://192.168.75.66:37027

注意事项

flannel v0.11版本不支持etcd v3.4.3版本，支持etcd v3.3.10版本

因为etcd分v2和v3俩版本，不同版本使用的命令参数不同，得到的结果也不同

若flannel v0.11使用etcd v3.4.3版本，则(Falnnel要用etcd存储自身一个子网信息，所以要保证能成功连接Etcd，写入预定义子网段)使用的命令会有变化，然后结果是可以写进去的。但是在启动flannel的时候，会报错：Couldn't fetch network config: client: response is invalid json. The endpoint is probably not valid etcd cluster endpoint.

这就是使用flannel版本跟etcd版本不支持的结果

posted @ 2019-11-01 18:26  哈喽哈喽111111  阅读(3757)  评论(3)  编辑  收藏  举报