openwrt mt7620 内存大小检测

单独编译内核: make V=s target/linux/install

相调函数调用流程：

init/main.c : start_kernel() -> setup_arch(&command_line)
arch/mips/kernel/setup.c:
setup_arch()
  -> cpu_probe()
  -> prom_init()
  -> arch_mem_init() -> plat_mem_setup() -> detect_memory_region()

prom_init()

arch/mips/ralink/prom.c 读寄存器收集CPU信息

void __init prom_init(void)
{
	int argc;
	char **argv;

	prom_soc_init(&soc_info);

	pr_info("SoC Type: %s\n", get_system_type());

	prom_init_cmdline(argc, argv);
}

prom_soc_init(&soc_info) 在 arch/mips/ralink/mt7620.c

其中从寄存器读得系统信息，填充到sock_info中。

prom.c 中定义了 struct ralink_soc sock_info结构体：

struct ralink_soc_info {
	unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
	unsigned char *compatible;

	unsigned long mem_base;
	unsigned long mem_size;
	unsigned long mem_size_min;
	unsigned long mem_size_max;
};

开机内核打印信息中有如下打印：

[    0.000000] Board has DDR2                                                                       
[    0.000000] Analog PMU set to hw control                                                         
[    0.000000] Digital PMU set to hw control                                                        
[    0.000000] SoC Type: Ralink MT7620A ver:2 eco:3

sock_info 填充的值为：

soc_info->compatible = "ralink,mt7620a-soc";
sock->sys_type = "Ralink MT7620A ver:2 eco:3";
soc_info->mem_base = MT7620_DRAM_BASE;         // 0x0
soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN; // 32
soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX; // 256

最后到detect_memory_region()中检测内存大小：

void __init detect_memory_region(phys_t start, phys_t sz_min, phys_t sz_max)
{
	void *dm = &detect_magic;
	phys_t size;

	for (size = sz_min; size < sz_max; size <<= 1) {
		pr_info("%s: dm %p, size 0x%x, sizeof 0x%x\n", __func__,
			dm, (uint32_t)size, sizeof(detect_magic));
		if (!memcmp(dm, dm + size, sizeof(detect_magic)))
			break;
	}

	pr_info("Memory: %lluMB of RAM detected at 0x%llx (min: %lluMB, max: %lluMB)\n",
		((unsigned long long) size) / SZ_1M,
		(unsigned long long) start,
		((unsigned long long) sz_min) / SZ_1M,
		((unsigned long long) sz_max) / SZ_1M);

	add_memory_region(start, size, BOOT_MEM_RAM);
}

打印值如下：

[    0.000000] detect_memory_region: dm 8030e9cc, size 0x2000000, sizeof 0x4
[    0.000000] detect_memory_region: dm 8030e9cc, size 0x4000000, sizeof 0x4
[    0.000000] detect_memory_region: dm 8030e9cc, size 0x8000000, sizeof 0x4
[    0.000000] Memory: 128MB of RAM detected at 0x0 (min: 32MB, max: 256MB)