SElinux测试及排错

一、修改SElinux的状态

#sestatus   --查看状态
#setenforce 0   --临时修改
#setenforce 1
#getenforce

#vim /etc/selinux/config   --通过配置文件修改
SELINUX=Enforcing
#systemctl reboot   --重启生效
#getenforce 

二、文件的上下文
#setenforce 1
#yum install -y httpd
#mkdir /local
#echo lxjtest > /local/index.html
#ln -s /local/ /var/www/html/soft

[root@rhel1 html]# ll -Z /local/index.html 
-rw-r--r--. root root unconfined_u:object_r:default_t:s0 /local/index.html 
[root@rhel1 html]# ll -Z /var/www/
drwxr-xr-x. root root system_u:object_r:httpd_sys_script_exec_t:s0 cgi-bin
drwxr-xr-x. root root system_u:object_r:httpd_sys_content_t:s0 html

修改文件上下文的三种方法：

方法1：修改/local目录的的fcontext为httpd_sys_content_t
#semanage fcontext -l | grep http
#chcon -R -t httpd_sys_content_t /local/
方法2：
修改/local目录的的fcontext为跟/var/www目录一致
#chcon -R --reference /var/www/ /local/
方法3：
#semanage fcontext -a -t httpd_sys_content_t '/local(/.*)?'
#restorecon -FRv /local
# man semanage fcontext

#推荐使用第3钟方法，文件夹上下文类型将写入内核

在RHEL2上访问测试：
#setenforce 1
http://192.168.100.1/soft    #未在RHEL1修改上下文，访问会被Forbidden，修改正确后可访问

实验一、端口的上下文
#查看端口的上下文
#semanage port -l | grep http
#添加端口的上下文
#semanage port -a -t http_port_t -p tcp 8899
#删除端口的上下文
#semanage port -d -t http_port_t -p tcp 8899
#修改端口的上下文
#semanage port -m -t http_port_t -p tcp 8899
#修改防火墙
#firewall-cmd --permanent --add-port=8899/tcp
#firewall-cmd --reload
#修改httpd配置文件，以监听8899端口
#vim /etc/httpd/conf/httpd.conf
Listen 8899  #增加

#mkdir /var/www/8899
#echo 8899 > /var/www/8899/index.html

#vim /etc/httpd/conf.d/0.conf

< VirtualHost 192.168.100.1:80>
    DocumentRoot "/var/www/html"
    ServerName 192.168.100.1
< /VirtualHost>
< VirtualHost 192.168.100.1:8899>
    DocumentRoot "/var/www/8899"
    ServerName 192.168.100.1
< /VirtualHost>

#systemctl restart httpd

在rhel1和rhel2上访问测试：
http://192.168.100.1
http://192.168.100.1:8899

实验二、布尔值
使用SElinux图形画界面来配置selinux
#yum provides system-config-selinux
#yum install -y policycoreutils-gui-2.2.5-11.el7.x86_64
#system-config-selinux 打开SElinux图形界面

例：
#yum install -y samba
#getsebool -a
#getsebool -a | grep samba
#setsebool -P samba_enable_home_dir on
#setsebool -P samba_export_all_rw on
-a 列出
-P 永久生效permanent

实验三、SElinux在网络各服务中的配置
man selinux
常见有一些服务的SElinux配置
===ftp===
//If you want to share files anonymously <如果你想把这个共享给匿名的话，需要开启以下>
chcon -R -t public_content_t /var/ftp
//If you want to setup a directory where you can upload files
＜如果你想让你设置的FTP目录可以上传文件的话，SELINUX需要设置＞
chcon -t public_content_rw_t /var/ftp/incoming
//You must also turn on the boolean allow_ftpd_anon_write <允许匿名用户写入权限＞
setsebool -P allow_ftpd_anon_write=1
//If you are setting up this machine as a ftpd server and wish to allow users to access their home directorories<如果你希望你的FTP用户可以访问自己的家目录的话，需要开启>
setsebool -P ftp_home_dir 1
//If you want to run ftpd as a daemon<如果你希望将vsftpd以daemon的方式运行的话，需要开启>
setsebool -P ftpd_is_daemon 1
//You can disable SELinux protection for the ftpd daemon<你可以让SElinux停止保护vsftpd的daemon方式动行>
setsebool -P ftpd_disable_trans 1

===httpd===
//If you want a particular domain to write to the public_content_rw_t domain
< 如果希望具体个doman具有可写权限的话，需要设置>
setsebool -P allow_httpd_anon_write=1
or
setsebool -P allow_httpd_sys__anon_write=1
//httpd can be setup to allow cgi s to be executed <HTTP被设置允许cgi的设置>
setsebool -P httpd_enable_cgi 1
//If you want to allow access to users home directories<允许用户HHTP访问其家目录，该设定限仅于用户的家目录主页>
setsebool -P httpd_enable_homedirs 1
chcon -R -t httpd_sys_content_t ~user/public_html
//httpd is allowed access to the controling terminal<允许httpd访问终端＞
setsebool -P httpd_tty_comm 1
//such that one httpd service can not interfere with another
setsebool -P httpd_unified 0
//loadable modules run under the same context as httpd
setsebool -P httpd_builtin_ing 0
//httpd s are allowed to connect out to the network
setsebool -P httpd_can_network_connect 1
// You can disable suexec transition
setsebool -P httpd_suexec_disable_trans 1
//You can disable SELinux protection for the httpd daemon by executing <关闭Selinux的关于httpd进程守护的保护>
setsebool -P httpd_disable_trans 1
service httpd restart

===named===
//If you want to have named update the master zone files <关于named,master更新selinux设定>
setsebool -P named_write_master_zones 1
//You can disable SELinux protection for the named daemon by executing
< 关闭named的进程守护保护>
setsebool -P named_disable_trans 1
service named restart

===nfs===
//If you want to setup this machine to share nfs partitions read only
< Selinux将本机的NFS共享设置成只读>
setsebool -P nfs_export_all_ro 1
//If you want to share files read/write<Selinux将本机的NFS共享设置成可读可写>
setsebool -P nfs_export_all_rw 1
//If you want to use a remote NFS server for the home directories on this machine
＜如果你想要将远程NFS的家目录共享到本机，需要开启>
setsebool -P use_nfs_home_dirs 1

===samba===
//If you want to share files other than home directorie
< 如果你希望将目录共享给其他用户，你需要设置>
chcon -t samba_share_t /directory
//If you want to share files with multiple domains
如果samba服务器共享目录给多个域，则需要：
setsebool -P allow_smbd_anon_write=1
//If you are setting up this machine as a Samba server and wish to share the home directories
samba服务器要共享家目录时：
setsebool -P samba_enable_home_dirs 1
//If you want to use a remote Samba server for the home directories on this machine
如果你需在本机上使用远程samba服务器的家目录
setsebool -P use_samba_home_dirs 1
//You can disable SELinux protection for the samba daemon by executing
关闭selinux关于samba的进程守护的保护
setsebool -P smbd_disable_trans 1
service smb restart

===rsync===
//If you want to share files using the rsync daemon
共享rsync目录时：
chcon -t public_content_t /directories
//If you want to share files with multiple domains
允许其他用户写入时
setsebool -P allow_rsync_anon_write=1
//You can disable SELinux protection for the rsync daemon by executing
停止rsync的进程保护
setsebool -P rsync_disable_trans 1

===kerberos===
//allow your system to work properly in a Kerberos environment
允许系统使用kerberos
setsebool -P allow_kerberos 1
//If you are running Kerberos daemons kadmind or krb5kdc
setsebool -P krb5kdc_disable_trans 1
service krb5kdc restart
setsebool -P kadmind_disable_trans 1
service kadmind restart

===nis===
Allow your system to work properly in a NIS environment
系统工作在nis环境时
setsebool -P allow_ypbind 1

实验四、selinux的troubleshoot
关闭SElinux问题直接解决说明很可能是SElinux的问题
方法一
如果SElinux阻止了某项服务，可以先设置SElinux为permissive模式，然后查看日志
方法二
#service auditd restart
#tail -f /var/log/message

Nov 10 16:58:13 rhel2 setroubleshoot: SELinux is preventing /usr/sbin/httpd from name_bind access on the tcp_socket port 8899. 
For complete SELinux messages run: sealert -l 477211dd-4f0a-4c46-a295-7eef08bf545b
Nov 10 16:58:13 rhel2 python: SELinux is preventing /usr/sbin/httpd from name_bind access on the tcp_socket port 8899.#012#012*****  
Plugin bind_ports (92.2 confidence) suggests   ************************#012#012If you want to allow /usr/sbin/httpd to bind to network port 8899
#012Then you need to modify the port type.#012Do#012# semanage port -a -t PORT_TYPE -p tcp 8899#012    
where PORT_TYPE is one of the following: http_cache_port_t, http_port_t, jboss_management_port_t, jboss_messaging_port_t, ntop_port_t, puppet_port_t.
#012#012*****  Plugin catchall_boolean (7.83 confidence) suggests   ******************#012#012If you want to allow nis to enabled
#012Then you must tell SELinux about this by enabling the 'nis_enabled' boolean.#012You can read 'None' man page for more details.
#012Do#012setsebool -P nis_enabled 1#012#012*****  Plugin catchall (1.41 confidence) suggests   **************************
#012#012If you believe that httpd should be allowed name_bind access on the port 8899 tcp_socket by default.
#012Then you should report this as a bug.#012You can generate a local policy module to allow this access.
#012Do#012allow this access for now by executing:#012# ausearch -c 'httpd' --raw | audit2allow -M my-httpd#012
# semodule -i my-httpd.pp#012

#sealert -l 477211dd-4f0a-4c46-a295-7eef08bf545b

[root@rhel2 ~]# sealert -l 477211dd-4f0a-4c46-a295-7eef08bf545b
SELinux is preventing /usr/sbin/httpd from name_bind access on the tcp_socket port 8899.

*****  Plugin bind_ports (92.2 confidence) suggests   ************************

If you want to allow /usr/sbin/httpd to bind to network port 8899
Then you need to modify the port type.
Do
# semanage port -a -t PORT_TYPE -p tcp 8899
    where PORT_TYPE is one of the following: http_cache_port_t, http_port_t, jboss_management_port_t, jboss_messaging_port_t, ntop_port_t, puppet_port_t.

*****  Plugin catchall_boolean (7.83 confidence) suggests   ******************

If you want to allow system to run with NIS
Then you must tell SELinux about this by enabling the 'nis_enabled' boolean.
You can read 'None' man page for more details.
Do
setsebool -P nis_enabled 1

*****  Plugin catchall (1.41 confidence) suggests   **************************

If you believe that httpd should be allowed name_bind access on the port 8899 tcp_socket by default.
Then you should report this as a bug.
You can generate a local policy module to allow this access.
Do
allow this access for now by executing:
# ausearch -c 'httpd' --raw | audit2allow -M my-httpd
# semodule -i my-httpd.pp


Additional Information:
Source Context                system_u:system_r:httpd_t:s0
Target Context                system_u:object_r:unreserved_port_t:s0
Target Objects                port 8899 [ tcp_socket ]
Source                        httpd
Source Path                   /usr/sbin/httpd
Port                          8899
Host                          rhel2.rusky.com
Source RPM Packages           httpd-2.4.6-67.el7.x86_64
Target RPM Packages           
Policy RPM                    selinux-policy-3.13.1-166.el7.noarch
Selinux Enabled               True
Policy Type                   targeted
Enforcing Mode                Enforcing
Host Name                     rhel2.rusky.com
Platform                      Linux rhel2.rusky.com 3.10.0-693.el7.x86_64 #1 SMP
                              Thu Jul 6 19:56:57 EDT 2017 x86_64 x86_64
Alert Count                   4
First Seen                    2017-11-10 16:49:42 CST
Last Seen                     2017-11-10 16:58:12 CST
Local ID                      477211dd-4f0a-4c46-a295-7eef08bf545b

Raw Audit Messages
type=AVC msg=audit(1510304292.2:1743): avc:  denied  { name_bind } for  pid=12009 comm="httpd" src=8899 scontext=system_u:system_r:httpd_t:s0 tcontext=system_u:object_r:unreserved_port_t:s0 tclass=tcp_socket


type=SYSCALL msg=audit(1510304292.2:1743): arch=x86_64 syscall=bind success=no exit=EACCES a0=5 a1=55cf7ca992e8 a2=10 a3=7ffca3c9125c items=0 ppid=1 pid=12009 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm=httpd exe=/usr/sbin/httpd subj=system_u:system_r:httpd_t:s0 key=(null)

Hash: httpd,httpd_t,unreserved_port_t,tcp_socket,name_bind

#sealert -b --通过图形化界面troubleshooting

方法三
audit2why < /var/log/audit/audit.log
audit2allow < /var/log/audit/audit.log