DP8.0安装步骤session
[root@rx6600]#./omnisetup.sh -CM -IS
The omnisetup.sh script did not complete the last time it was run.
Cell Manager still has to be installed
Installation Server still has to be installed
The omnisetup.sh script can now resume the installation session
or it can ignore the saved state and start a new session.
If you choose to ignore, the script will erase the saved state
and will process only the command line options.
Do you want the setup to resume the installation? (Y/n)
y
Resuming (using the specified CLI options)...
No Data Protector software detected on the target system.
Passed: The user account "hpdp" will be used for the IDB service.
Passed: Port number "7112" will be used for the "hpdp-idb" service.
Passed: Port number "7113" will be used for the "hpdp-idb-cp" service.
Passed: Port number "7116" will be used for the "hpdp-as" service.
Passed: Port number "9999" will be used for the "hpdp-as" service.
Passed: The kernel parameter value: SHMMAX = 2684354560.
The minimum required parameter value is "2684354560".
Passed: There are "8557428736" bytes of available system memory.
8 GB of system memory are recommended.
4 GB of system memory are required.
Passed: Data Protector installation requires 2764800 kilobytes of free
storage space on the "/opt" filesystem.
The filesystem "/opt" has 3420264 kilobytes of free space.
Passwd: Data Protector installation requires 308224 kilobytes of free
storage space on the "/var" filesystem.
The filesystem "/var" has 6104808 kilobytes of free space.
Passed: Data Protector installation requires 6144 kilobytes of free
storage space on the "/" filesystem.
The filesystem "/" has 797296 kilobytes of free space.
Do you wish to start AutoPass installation? (Y/n)
y
Starting AutoPass installation...
======= 02/13/23 19:38:11 MST BEGIN swinstall SESSION
(non-interactive) (jobid=rx6600-0034)
* Session started for user "root@rx6600".
* Beginning Selection
* Target connection succeeded for "rx6600:/".
* Source:
/cdrom/hpux/AUTOPASS/HPOvLic-05.51.061-HPUX11.22_IPF64-release.depot
* Targets: rx6600:/
* Software selections:
HPOVLIC.HPOVLIC,r=5.51.061,a=HP-UX_B.11.23_32/64,v=HP,fr=5.51.061,fa=HP-UX_B.11.23_32/64
HPOVLIC.HPOVLICJ,r=5.51.061,a=HP-UX_B.11.23_32/64,v=HP,fr=1.4.0.0,fa=HP-UX_B.11.23_32/64
* Selection succeeded.
* Beginning Analysis and Execution
* Session selections have been saved in the file
"/.sw/sessions/swinstall.last".
* "rx6600:/": There will be no attempt to mount filesystems
that appear in the filesystem table.
* The execution phase succeeded for "rx6600:/".
* Analysis and Execution succeeded.
NOTE: More information may be found in the agent logfile using the
command "swjob -a log rx6600-0034 @ rx6600:/".
======= 02/13/23 19:38:35 MST END swinstall SESSION (non-interactive)
(jobid=rx6600-0034)
NOTE: AutoPass requires JRE version 1.4.2_08 or higher versions.
NOTE: Please create a link /opt/OV/HPOvLIC/jre to the system's jre directory.
ln -s /opt/OV/HPOvLIC/jre <JRE_INSTALLED_PATH>
AutoPass has been successfully installed
Installing Data Protector A.08.00 Cell Manager and Installation Server...
======= 02/13/23 19:38:35 MST BEGIN swinstall SESSION
(non-interactive) (jobid=rx6600-0035)
* Session started for user "root@rx6600".
* Beginning Selection
* Target connection succeeded for "rx6600:/".
* "rx6600:/cdrom/hpux/DP_DEPOT": Cannot open the logfile on
this target or source. Possibly the media is read-only or
there is a permission problem. Check the daemon logfile and
"/var/tmp/swagent.log" on this host for more information.
* Source: /cdrom/hpux/DP_DEPOT
* Targets: rx6600:/
* Software selections:
+ B6960MA,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP
DATA-PROTECTOR.OMNI-AUTODR-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-CC,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.31_IA
DATA-PROTECTOR.OMNI-CC-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-CF-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-CHS-LS-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-CORE,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.23_IA
DATA-PROTECTOR.OMNI-CORE-IS,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.23_IA
DATA-PROTECTOR.OMNI-CS,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.31_IA
DATA-PROTECTOR.OMNI-DA,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.31_IA
DATA-PROTECTOR.OMNI-DA-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-DB2-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-DOCS,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-DOCS-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-EMC-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-FRA-LS-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-INF-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-INTEG-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-JCE-DISPATCHER,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.31_IA
DATA-PROTECTOR.OMNI-JCE-SERVICEREGISTRY,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.31_IA
DATA-PROTECTOR.OMNI-JPN-LS-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-LOTUS-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-MA,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.31_IA
DATA-PROTECTOR.OMNI-MA-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-NDMP-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-OR8-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-SAP-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-SAPDB-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-SMISA-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-SODA-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-SSEA-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-SYB-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-TS-AS,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.31_IA
DATA-PROTECTOR.OMNI-TS-CF-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-TS-CORE,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.23_IA
DATA-PROTECTOR.OMNI-TS-CS,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.31_IA
DATA-PROTECTOR.OMNI-TS-JRE,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.31_IA
DATA-PROTECTOR.OMNI-TS-PEGASUS-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-VEPA-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-VMW-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-VMWAREGRE-AGENT-P,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.11_32/64
DATA-PROTECTOR.OMNI-WS,r=A.08.00,a=HP-UX_B.11.11_32/64,v=HP,fr=A.08.00,fa=HP-UX_B.11.31_IA
* A "+" indicates an automatic selection due to dependency or
the automatic selection of a patch or reference bundle.
* Selection succeeded.
* Beginning Analysis and Execution
* Session selections have been saved in the file
"/.sw/sessions/swinstall.last".
* "rx6600:/": There will be no attempt to mount filesystems
that appear in the filesystem table.
* The execution phase succeeded for "rx6600:/".
* Analysis and Execution succeeded.
NOTE: More information may be found in the agent logfile using the
command "swjob -a log rx6600-0035 @ rx6600:/".
======= 02/13/23 19:59:54 MST END swinstall SESSION (non-interactive)
(jobid=rx6600-0035)
Installation/upgrade session finished.
[root@rx6600]#
[root@rx6600]#./omnisv status
ProcName Status [PID]
===============================
crs : Active [10801]
mmd : Active [10799]
kms : Active [10800]
hpdp-idb : Active [10392]
hpdp-idb-cp : Active [10203]
hpdp-as : Active [10833]
omnitrig : Active
Sending of traps disabled.
===============================
Status: All Data Protector processes/services up and running.
[root@rx6600]#./omnidbcheck -extended
Check Level Mode Status
===========================================================
Database connection -connection OK
Schema consistency -schema_consistency OK
Datafiles consistency -verify_db_files OK
Database consistency -database_consistency OK
Media consistency -media_consistency OK
SIBF(readability) -sibf OK
DCBF(presence and size) -bf OK
OMNIDC(consistency) -dc OK
DONE!
[root@rx6600]#./omnisv -version
HP Data Protector A.08.00: OMNISV, internal build 596, built on Sun May 19 14:20:44 2013
[root@rx6600]#
[root@rx6600]#swlist
# Initializing...
# Contacting target "rx6600"...
#
# Target: rx6600:/
#
#
# Bundle(s):
#
10GigEthr-02 B.11.31.1003 PCIe 10 Gigabit Ethernet;Supptd HW=567799-B21
2017Jun1131 2017.07 HPUX 11.31 Megpatch for Jun2017
B2491BA B.11.31 MirrorDisk/UX (Server)
B3701AA C.04.73.000 HP GlancePlus/UX Pak for 11.31
B3835DA C.03.05 HP Process Resource Manager
B3929FB B.05.00.02 OnlineJFS for Veritas File System 5.0 Bundle
B5736DA A.04.20.31.05 HA Monitors
B6848BA 1.4.gm.46.16 Ximian GNOME 1.4 GTK+ Libraries for HP-UX
B6960MA A.08.00 HP Data Protector
