How to scale Complex Event Processing (CEP)/ Streaming SQL Systems?

转自：https://iwringer.wordpress.com/2012/05/18/how-to-scale-complex-event-processing-cep-systems/

What is CEP?

Complex event processing (CEP) systems query events on the fly without storing them.

• For an introduction and definition of CEP, please refer to CEP Blogand Wikipedia.) .
• If you need a real comprehensive coverage of CEP, read the paper “Processing flows of information: from Data stream to Complex Event Processing” [1]. (or the slide deck).

In CEP, we think in terms of event streams. Event stream is a logical sequence of events that become available over time. For example, stock event steam consists of events that notify changes to stock price. Users provide queries to the CEP engine, which implements the CEP logic, and the CEP engine matches those queries against events coming through event streams.

CEP differs from other paradigms like event processing, filtering etc., by its support for temporal queries that reason in terms of temporal concepts like “time windows” and “before and after relationships” etc. For example, a typical CEP query will say that

“If IBM stock value increased by more than 10% within an hour, please notify me”.

Such a CEP query has few defining characteristics.

1. CEP queries generally keep running, and keep emitting events when events match the condition given in the query.
2. CEP query operates on the fly and stores only minimal amount of events into a storage.
3. CEP Engines responds to conditions generally within milliseconds range.

What is Scaling CEP?

There are many CEP Engine implementations (see CEP Players list 2012). However, mostly CEP engines run in a large box, scaling up horizontally. Vertically scaling CEP engines is still an open problem. Reminder of this post discusses what vertically scaling CEP engine means and some of the potential answers.

We use the term Scaling to describe the ability for a CEP system to hande larger or complex queries by adding more resources. Scaling CEP has several dimensions.

1. Handling Large number of queries
2. Queries that needs large working memory
3. Handling a complex query that might not fit within a single machine
4. Handling large number of events

How to Scale CEP?

Let us consider each dimension separately.

Handling Large Number of Queries

This is the easiest of the four since we can use the shared nothing architecture. Here we can run multiple CEP Engine instances (each instance runs in a single host) each running a subset of queries.

1. Trivial implementation will send all events (streams) to all the CEP engines
2. More optimized implementations can use a Publish/subscribe message broker network (like Narada Broker). Here each CEP engine should analyze the deployed queries and subscribe to required event streams in the broker network. Generally, we match each event stream to a topic in the publish/subscribe system.
3. Third option is to delegate the event distribution to a Stream Processing system (e.g. Apache S4 or Strom). For instance, links [4] and [5] describe such a scenario to run Esper within Strom.

Queries that need large working memory

For instance, a long running complex query that needs to maintain a large window and all events in the window would need a large working memory. Potential answer to this problem is to use a distributed cache to store the working memory. Reference [6] describes such a scenario.

Handling large number of events handling a complex query that might not fit within a single machine

We will handle the both scenarios together as both are two sides of the same coin. In both cases, we have trouble fitting a single query into a single host such that it can support the given event rate.
To handle such scenarios, we have to distribute the query across many computers.

We can do this by breaking the query into several steps in a pipeline that matches events against some conditions and republish the matching events to steps further in the pipeline. Then we can deploy different steps of the pipeline into different machines.

For example, lets consider the following query. This query matches if there are two events within 30 seconds from IBM stocks that having price greater than 70 and having prize increase more than 10%.

select a1.symbol, a1.prize, a2.prize from every 
    a1=StockStream[price > 70  symbol =’IBM’] -> 
    a2=StockStream[price > 70  symbol =’IBM’]
        [a1.price < 1.1*a2.prize][within.time=30]

As shown by the figure, we can break the query into three nodes, and each node will have to republish the matching events to the next node. (Option 1)

CEP Query as a Pipeline

However, queries often have other properties that allow further optimization. For example, although the last step of matching prize increase is stateful other two steps are stateless. Stateful operations remember information after processing an event so that earlier events affect the processing of later events while stateless operations only depends on the event being processed.

Therefore, we can add multiple instances in the place of those statless instances using a shared-nothing architecture. For example, we can break the query into five nodes as shown by the bottom part of the picture (Option 2).

Also another favorable fact is that CEP processing generally happens through filtering where amount of events reduce as we progress through the pipeline. Therefore, pushing stateless filter like operations (e.g. matching against symbol =”IBM”) to the first parts of the pipeline and scaling them in shared nothing manner should allow us to scale up the system for much higher event rates. For example, lets say that the StockQuote event stream generates 100,000 events per seconds, but only 5% of them are about IBM. Therefore, only 5000 events will make it past the first filter, which we can handle much easier than 100k events.

However, it is worth noting that above method only works with some queries. For example, if we have a query that has a single stateful operation like window-based pattern, we cannot use this method.
Unfortunately, there is no framework that can do this out of the box (let me know if I am wrong). So if you want to do this, you will have to code it. If you choose to do that, using a pub/sub network or stream processing system might reduce most of the complexities.

Please shared your thoughts!

Note: Above ideas are now supported on top of WSO2 Stream Processor with two nodes for smaller use cases that require HA and with Kafka for larger use cases.

1. Alessandro Margara and Gianpaolo Cugola. 2011. Processing flows of information: from data stream to complex event processing. InProceedings of the 5th ACM international conference on Distributed event-based system(DEBS ’11).
2. http://www.thetibcoblog.com/2009/08/21/cep-versus-esp-an-essay-or-maybe-a-rant/
3. http://www.slideshare.net/TimBassCEP/mythbusters-event-stream-processing-v-complex-event-processing-presentation
4. Run Esper with Storm –http://stackoverflow.com/questions/9164785/how-to-scale-out-with-esper
5. http://tomdzk.wordpress.com/2011/09/28/storm-esper/
6. Distributed Cache to scale CEP –http://magmasystems.blogspot.com/2008/02/cep-engines-and-object-caches.html