zabbix 配置——bak

1.host 配置

create host

Parameter	Description
Host name	主机名，只允许数字,空格,句号,下划线,非主流符号它不支持。zabbix客户端配置文件中的hostname名称一定要与这个名字一致
Visible name	显示名称，可选项。主机名的别名。这个属性支持utf - 8。
Groups	选择host所属host group，每个host至少属于一个host group
New host group	A new group can be created and linked to the host. Ignored, if empty.
Interfaces	Several host interface types are supported for a host: Agent, SNMP, JMX and IPMI.   To add a new interface, click on Add in the Interfaces block and enter IP/DNS, Connect to and Port info. Note: Interfaces that are used in any items cannot be removed and link Remove is greyed out for them. Use bulk requests option for SNMP interfaces allows to enable/disable bulk processing of SNMP requests per interface. 主机接口: 包含Agent, SNMP, JMX and IPMI.如果需要增加一个接口，只需要点击“add”即可。键入客户机的ip地址即可，推荐使用ip地址方式来监控，当然也可以使用域名的方式来监控。zabbix agent默认端口10050，snmp 161，jmx 12345，IMPI 623
IP address	Host IP address (optional).
DNS name	Host DNS name (optional).
Connect to	Clicking the respective button will tell Zabbix server what to use to retrieve data from agents: IP - Connect to the host IP address (recommended) DNS - Connect to the host DNS name
Port	TCP/UDP port number. Default values are: 10050 for Zabbix agent, 161 for SNMP agent, 12345 for JMX and 623 for IPMI.
Default	Check the radio button to set the default interface.
Description	Enter the host description.
Monitored by proxy	The host can be monitored either by Zabbix server or one of Zabbix proxies: (no proxy) - host is monitored by Zabbix server Proxy name - host is monitored by Zabbix proxy “Proxy name”
Enabled	Mark the checkbox to make the host active, ready to be monitored. If unchecked, the host is not active, thus not monitored.