09 2019 档案

摘要:https://www.cnblogs.com/may1016/p/5088377.html 阅读全文
posted @ 2019-09-30 15:39 hostid 阅读(126) 评论(0) 推荐(0) 编辑
摘要:ldr lr,=halt_loop ldr pc,=main halt_loop: b halt_loop 配置了链接寄存器指向的是halt_loop,在pc跳到主函数运行结束之后,pc的值会指向链接寄存器lr,然后就跳到halt_loop这个死循环上了,这是程序结束至死循环的意思。 1、如果mai 阅读全文
posted @ 2019-09-30 15:31 hostid 阅读(599) 评论(0) 推荐(0) 编辑
摘要:https://blog.csdn.net/xiaodingqq/article/details/80098758 https://blog.csdn.net/weixin_42639919/article/details/83147700 阅读全文
posted @ 2019-09-30 15:18 hostid 阅读(386) 评论(0) 推荐(0) 编辑
摘要:https://blog.csdn.net/slowisfastlemon/article/details/83822598 https://blog.csdn.net/caihaitao2000/article/details/84674095 bss段为何要清除 https://www.cnbl 阅读全文
posted @ 2019-09-30 14:56 hostid 阅读(329) 评论(0) 推荐(0) 编辑
摘要:韦东山判断nor,nand启动时: volatile unsigned int pZeroAddr = (volatitle usnigned int)0; int iValOfZeroAddr = pZeroAddr; //nor flash可以像内存一样去读取。 pZeroAddr = 0x12 阅读全文
posted @ 2019-09-30 11:21 hostid 阅读(222) 评论(0) 推荐(0) 编辑
摘要:https://www.cnblogs.com/80scd/p/5869334.html https://www.cnblogs.com/kele dad/p/8970103.html https://wenku.baidu.com/view/fde2775e7dd184254b35eefdc8d3 阅读全文
posted @ 2019-09-29 17:05 hostid 阅读(124) 评论(0) 推荐(0) 编辑
摘要:https://www.jianshu.com/p/917c0fb8778b?utm_campaign=maleskine&utm_content=note&utm_medium=reader_share&utm_source=weixin&from=timeline 有限状态机(finite st 阅读全文
posted @ 2019-09-29 14:43 hostid 阅读(365) 评论(0) 推荐(0) 编辑
摘要:cjson网址:https://sourceforge.net/projects/cjson/ MyTinySTL网址:https://github.com/Alinshans/MyTinySTL oatpp网址:https://github.com/oatpp/oatpp Tinyhttpd网址: 阅读全文
posted @ 2019-09-24 13:27 hostid 阅读(591) 评论(0) 推荐(0) 编辑
摘要:https://blog.csdn.net/derkampf/article/details/60958086 https://blog.csdn.net/u014608280/article/details/80541589 https://blog.csdn.net/lusic01/articl 阅读全文
posted @ 2019-09-24 10:25 hostid 阅读(137) 评论(0) 推荐(0) 编辑
摘要:https://www.cnblogs.com/MrYuan/p/5689235.html 阅读全文
posted @ 2019-09-23 12:13 hostid 阅读(234) 评论(0) 推荐(0) 编辑
摘要:一、变量的定义可能出现的地方只有两种 1、makefile全局变量:一定在target外部 2、出现在target内的shell内部的变量 3、target内部: 3.1:如果是makefile中的关键字语法,前面一定不能出现tab,否则会当成命令处理。 3.2:target内部若用的时shell的 阅读全文
posted @ 2019-09-20 17:50 hostid 阅读(195) 评论(0) 推荐(0) 编辑
摘要:https://blog.csdn.net/fungleo/article/details/80703365 https://blog.csdn.net/qq_39436605/article/details/85159568 https://blog.csdn.net/FlayHigherGT/a 阅读全文
posted @ 2019-09-20 15:20 hostid 阅读(266) 评论(0) 推荐(0) 编辑
摘要:https://www.cnblogs.com/ftl1012/tag/Linux命令/default.html?page=5 1、file file命令用来探测给定文件的类型,编码格式,file命令对文件的检查分为文件系统 https://blog.csdn.net/yexiangCSDN/art 阅读全文
posted @ 2019-09-18 22:26 hostid 阅读(335) 评论(0) 推荐(0) 编辑
摘要:1、事件通知库libevent ./configure prefix=/home/arm libevent/ host=arm none linux gnueabi CC=arm none linux gnueabi gcc CXX=arm none linux gnueabi g++ //添加ss 阅读全文
posted @ 2019-09-17 13:45 hostid 阅读(901) 评论(0) 推荐(0) 编辑
摘要:编程时不能用p==NULL去判断遍历是否完成。 阅读全文
posted @ 2019-09-04 21:44 hostid 阅读(279) 评论(0) 推荐(0) 编辑

点击右上角即可分享
微信分享提示