aliyun添加数据盘后的物理分区和lvm逻辑卷两种挂载方式
一、普通磁盘分区管理方式
1.对磁盘进行分区
列出磁盘
# fdisk -l
# fdisk /dev/vdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x4765885b.
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
Partition number (1-4, default 1): 1
First sector (2048-2097151999, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-2097151999, default 2097151999):
Using default value 2097151999
Partition 1 of type Linux and of size 1000 GiB is set
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
# fdisk -l
Disk /dev/vda: 42.9 GB, 42949672960 bytes, 83886080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x635e6c7d
Device Boot Start End Blocks Id System
/dev/vda1 2048 83886079 41942016 83 Linux
Disk /dev/vdb: 1073.7 GB, 1073741824000 bytes, 2097152000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x4765885b
Device Boot Start End Blocks Id System
/dev/vdb1 2048 2097151999 1048574976 83 Linux
2.对磁盘格式化成ext4格式
# mkfs.ext4 /dev/vdb1
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
65536000 inodes, 262143744 blocks
13107187 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=2409627648
8000 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
102400000, 214990848
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
3.将新的磁盘挂载在/data目录下
mkdir /data
# mount /dev/vdb1 /data
查看是否挂载成功
# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/vda1 ext4 40G 1.3G 37G 4% /
devtmpfs devtmpfs 32G 0 32G 0% /dev
tmpfs tmpfs 32G 0 32G 0% /dev/shm
tmpfs tmpfs 32G 292K 32G 1% /run
tmpfs tmpfs 32G 0 32G 0% /sys/fs/cgroup
tmpfs tmpfs 6.3G 0 6.3G 0% /run/user/0
/dev/vdb1 ext4 985G 77M 935G 1% /data
4.添加自动挂载，重启系统后依然生效
vim /etc/fstab
/dev/vdb1 /data ext4 defaults 0 0
二、逻辑卷的方式
yum install -y lvm2 vim unzip iftop
# fdisk -l
Disk /dev/vda: 42.9 GB, 42949672960 bytes, 83886080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x635e6c7d
Device Boot Start End Blocks Id System
/dev/vda1 2048 83886079 41942016 83 Linux
Disk /dev/vdb: 2147.5 GB, 2147483648000 bytes, 4194304000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
# fdisk /dev/vdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x31ab9b87.
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
Partition number (1-4, default 1): 1
First sector (2048-4194303999, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-4194303999, default 4194303999):
Using default value 4194303999
Partition 1 of type Linux and of size 2 TiB is set
# 更加规范的做法是在分区时需要一个修改磁盘分区格式为linux lvm 代码为8e的操作
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
# cat /proc/partitions
major minor #blocks name
11 0 1048575 sr0
253 0 41943040 vda
253 1 41942016 vda1
253 16 2097152000 vdb
253 17 2097150976 vdb1
# pvcreate /dev/vdb1
Physical volume "/dev/vdb1" successfully created.
# vgcreate myvg /dev/vdb1
Volume group "myvg" successfully created
# vgdisplay
--- Volume group ---
VG Name myvg
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 1
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 0
Open LV 0
Max PV 0
Cur PV 1
Act PV 1
VG Size 1.95 TiB
PE Size 4.00 MiB
Total PE 511999
Alloc PE / Size 0 / 0
Free PE / Size 511999 / 1.95 TiB
VG UUID RpMeCU-gIV2-kEe5-fe6C-8iVI-xe0i-vf4ocp
# lvcreate -L 1.95T -n mylv myvg
Rounding up size to full physical extent 1.95 TiB
Logical volume "mylv" created.
# lvdisplay
--- Logical volume ---
LV Path /dev/myvg/mylv
LV Name mylv
VG Name myvg
LV UUID e1nL7K-0qyc-BHt8-x9oO-1gGC-6qWn-a52o6x
LV Write Access read/write
LV Creation host, time iZ2ze47of4mpxkhhzcgjheZ, 2017-01-07 12:18:26 +0800
LV Status available
# open 0
LV Size 1.95 TiB
Current LE 511181
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 252:0
# mke2fs -t ext4 -b 2048 /dev/myvg/mylv
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=2048 (log=1)
Fragment size=2048 (log=1)
Stride=0 blocks, Stripe width=0 blocks
130863104 inodes, 1046898688 blocks
52344934 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=1315438592
63898 block groups
16384 blocks per group, 16384 fragments per group
2048 inodes per group
Superblock backups stored on blocks:
16384, 49152, 81920, 114688, 147456, 409600, 442368, 802816, 1327104,
2048000, 3981312, 5619712, 10240000, 11943936, 35831808, 39337984,
51200000, 107495424, 256000000, 275365888, 322486272, 967458816
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
# mkdir /data
# mount /dev/myvg/mylv /data
# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/vda1 ext4 40G 1.3G 37G 4% /
devtmpfs devtmpfs 32G 0 32G 0% /dev
tmpfs tmpfs 32G 0 32G 0% /dev/shm
tmpfs tmpfs 32G 356K 32G 1% /run
tmpfs tmpfs 32G 0 32G 0% /sys/fs/cgroup
tmpfs tmpfs 6.3G 0 6.3G 0% /run/user/0
/dev/mapper/myvg-mylv ext4 2.0T 24M 1.9T 1% /data
开机自启动挂载分区
vim /etc/fstab
加入以下内容：
/dev/myvg/mylv /data ext4 defaults,noatime 0 0
# cat /etc/fstab
#
# /etc/fstab
# Created by anaconda on Tue May 3 13:48:10 2016
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=80b9b662-0a1d-4e84-b07b-c1bf19e72d97 / ext4 defaults 1 1
/dev/myvg/mylv /data ext4 defaults,noatime 0 0
示例
新购买的ECS数据盘1T，用了阿里云的400G数据盘作为模板
登录进去后数据盘只有400G，在控制台关闭ECS，重新初始化磁盘
[root@eus-timed-task01:~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/vda1 ext4 79G 9.0G 66G 13% /
tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm
[root@eus-timed-task01:~]# mount -a
[root@eus-timed-task01:~]# mount
/dev/vda1 on / type ext4 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
# 想通过格式化/dev/vdb1 成ext4
[root@eus-timed-task01:~]# mkfs.ext4 /dev/vdb1
mke2fs 1.41.12 (17-May-2010)
/dev/vdb1 is apparently in use by the system; will not make a filesystem here!
解决办法：
[root@eus-timed-task01:~]# dmsetup status
VG_Data-lv_data: 0 838852608 linear
[root@eus-timed-task01:~]# dmsetup remove_all
[root@eus-timed-task01:~]# demesup status
-bash: demesup: command not found
[root@eus-timed-task01:~]# dmsetup status
No devices found
[root@eus-timed-task01:~]# pvcreate /dev/vdb1
Physical volume "/dev/vdb1" successfully created
# lvm分区
[root@eus-timed-task01:~]# vgcreate /dev/vdb1
Please enter a physical volume path.
Run `vgcreate --help' for more information.
[root@eus-timed-task01:~]# vgcreate myvg /dev/vdb1
Volume group "myvg" successfully created
[root@eus-timed-task01:~]# vgdisplay
--- Volume group ---
VG Name myvg
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 1
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 0
Open LV 0
Max PV 0
Cur PV 1
Act PV 1
VG Size 1000.00 GiB
PE Size 4.00 MiB
Total PE 255999
Alloc PE / Size 0 / 0
Free PE / Size 255999 / 1000.00 GiB
VG UUID oeMYkq-8l6C-dHZx-In5b-3m8m-3jj5-dihQ3M
--- Volume group ---
VG Name VG_Data
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 2
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 1
Open LV 0
Max PV 0
Cur PV 1
Act PV 1
VG Size 400.00 GiB
PE Size 4.00 MiB
Total PE 102399
Alloc PE / Size 102399 / 400.00 GiB
Free PE / Size 0 / 0
VG UUID 6dlcbY-mLx3-spKv-DUQ3-Av2S-7fVD-ye8JVC
# 100磁盘使用率
[root@eus-timed-task01:~]# lvcreate -l 100%VG -n mylv myvg
Logical volume "mylv" created.
[root@eus-timed-task01:~]# lvdisplay
--- Logical volume ---
LV Path /dev/myvg/mylv
LV Name mylv
VG Name myvg
LV UUID iq0LKn-bDSO-QPAn-C0mV-jADG-vc4W-PRPawO
LV Write Access read/write
LV Creation host, time eus-timed-task01, 2018-08-08 03:00:50 -0700
LV Status available
# open 0
LV Size 1000.00 GiB
Current LE 255999
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:0
--- Logical volume ---
LV Path /dev/VG_Data/lv_data
LV Name lv_data
VG Name VG_Data
LV UUID Yn1sTI-gAop-kodn-cvsN-OYnN-fNES-n7l9uk
LV Write Access read/write
LV Creation host, time iZrj9citgdpobfu83gsgodZ, 2018-06-15 00:05:23 -0700
LV Status NOT available
LV Size 400.00 GiB
Current LE 102399
Segments 1
Allocation inherit
Read ahead sectors auto
[root@eus-timed-task01:~]# mke2fs -t ext4 -b 2048 /dev/myvg/mylv
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=2048 (log=1)
Fragment size=2048 (log=1)
Stride=0 blocks, Stripe width=0 blocks
65536000 inodes, 524285952 blocks
26214297 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=1061158912
32000 block groups
16384 blocks per group, 16384 fragments per group
2048 inodes per group
Superblock backups stored on blocks:
16384, 49152, 81920, 114688, 147456, 409600, 442368, 802816, 1327104,
2048000, 3981312, 5619712, 10240000, 11943936, 35831808, 39337984,
51200000, 107495424, 256000000, 275365888, 322486272
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 30 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
[root@eus-timed-task01:~]# ls /data
[root@eus-timed-task01:~]# mount /dev/myvg/mylv /data
[root@eus-timed-task01:~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/vda1 ext4 79G 6.2G 69G 9% /
tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm
/dev/mapper/myvg-mylv
ext4 985G 23M 935G 1% /data
[root@eus-timed-task01:~]# vim /etc/fstab
/dev/myvg/mylv /data ext4 defaults,noatime 0 0
# 重新启动看能否正常挂载
逻辑卷扩容的示例
# vgdisplay myvg
--- Volume group ---
VG Name myvg
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 2
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 1
Open LV 1
Max PV 0
Cur PV 1
Act PV 1
VG Size 120.00 GiB
PE Size 4.00 MiB
Total PE 30719
Alloc PE / Size 28160 / 110.00 GiB
Free PE / Size 2559 / 10.00 GiB
VG UUID v5LSS8-E5HW-htEL-ioet-Up3T-zUFz-vtCzlA
[root@mini2 ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/centos-root xfs 30G 1.8G 29G 6% /
devtmpfs devtmpfs 907M 0 907M 0% /dev
tmpfs tmpfs 917M 0 917M 0% /dev/shm
tmpfs tmpfs 917M 8.6M 908M 1% /run
tmpfs tmpfs 917M 0 917M 0% /sys/fs/cgroup
/dev/mapper/centos-data xfs 40G 33M 40G 1% /data
/dev/mapper/myvg-mylv ext4 109G 19M 103G 1% /aliyun
/dev/sda1 xfs 297M 115M 183M 39% /boot
tmpfs tmpfs 184M 0 184M 0% /run/user/0
1.新增一块60G的硬盘，分区
# fdisk /dev/sdc
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x58d7841e.
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
Partition number (1-4, default 1): 1
First sector (2048-104857599, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-104857599, default 104857599):
Using default value 104857599
Partition 1 of type Linux and of size 50 GiB is set
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
2.将新增加的分区/dev/sdc1扩容到物理卷myvg中
# vgextend myvg /dev/sdc1
Physical volume "/dev/sdc1" successfully created
Volume group "myvg" successfully extended
# 可以看到由10G扩展到了59.99G
[root@mini2 ~]# vgdisplay myvg
--- Volume group ---
VG Name myvg
System ID
Format lvm2
Metadata Areas 2
Metadata Sequence No 3
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 1
Open LV 1
Max PV 0
Cur PV 2
Act PV 2
VG Size 169.99 GiB
PE Size 4.00 MiB
Total PE 43518
Alloc PE / Size 28160 / 110.00 GiB
Free PE / Size 15358 / 59.99 GiB
VG UUID v5LSS8-E5HW-htEL-ioet-Up3T-zUFz-vtCzlA
# lvdisplay /dev/myvg/mylv
--- Logical volume ---
LV Path /dev/myvg/mylv
LV Name mylv
VG Name myvg
LV UUID 3H0Qgm-tDJr-BJ96-Y0Vh-TMOE-1EZv-DN3qUE
LV Write Access read/write
LV Creation host, time mini2, 2017-01-07 13:55:37 +0800
LV Status available
# open 1
LV Size 110.00 GiB
Current LE 28160
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 8192
Block device 253:2
3.扩展物理边界为150G
[root@mini2 ~]# lvextend -L 150G /dev/myvg/mylv
Size of logical volume myvg/mylv changed from 110.00 GiB (28160 extents) to 150.00 GiB (38400 extents).
Logical volume mylv successfully resized.
可以看到已经有110变成了150G
[root@mini2 ~]# lvdisplay /dev/myvg/mylv
--- Logical volume ---
LV Path /dev/myvg/mylv
LV Name mylv
VG Name myvg
LV UUID 3H0Qgm-tDJr-BJ96-Y0Vh-TMOE-1EZv-DN3qUE
LV Write Access read/write
LV Creation host, time mini2, 2017-01-07 13:55:37 +0800
LV Status available
# open 1
LV Size 150.00 GiB
Current LE 38400
Segments 2
Allocation inherit
Read ahead sectors auto
- currently set to 8192
Block device 253:2
[root@mini2 ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/centos-root xfs 30G 1.8G 29G 6% /
devtmpfs devtmpfs 907M 0 907M 0% /dev
tmpfs tmpfs 917M 0 917M 0% /dev/shm
tmpfs tmpfs 917M 8.6M 908M 1% /run
tmpfs tmpfs 917M 0 917M 0% /sys/fs/cgroup
/dev/mapper/centos-data xfs 40G 33M 40G 1% /data
/dev/mapper/myvg-mylv ext4 109G 19M 103G 1% /aliyun
/dev/sda1 xfs 297M 115M 183M 39% /boot
tmpfs tmpfs 184M 0 184M 0% /run/user/0
4.扩展逻辑边界，可以看到磁盘分区/aliyun由109G变成了148G
[root@mini2 ~]# resize2fs /dev/myvg/mylv
resize2fs 1.42.9 (28-Dec-2013)
Filesystem at /dev/myvg/mylv is mounted on /aliyun; on-line resizing required
old_desc_blocks = 110, new_desc_blocks = 150
The filesystem on /dev/myvg/mylv is now 78643200 blocks long.
[root@mini2 ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/centos-root xfs 30G 1.8G 29G 6% /
devtmpfs devtmpfs 907M 0 907M 0% /dev
tmpfs tmpfs 917M 0 917M 0% /dev/shm
tmpfs tmpfs 917M 8.6M 908M 1% /run
tmpfs tmpfs 917M 0 917M 0% /sys/fs/cgroup
/dev/mapper/centos-data xfs 40G 33M 40G 1% /data
/dev/mapper/myvg-mylv ext4 148G 17M 141G 1% /aliyun
/dev/sda1 xfs 297M 115M 183M 39% /boot
tmpfs tmpfs 184M 0 184M 0% /run/user/0
UCLOUD对数据盘扩容后需要控制台重启，并进入系统后进行如下操作：
//针对ext4文件格式的操作系统（如CentOS6）：
umount /dev/vdb e2fsck -f /dev/vdb resize2fs /dev/vdb mount /dev/vdb /data
ucloud升级磁盘空间后需要做的操作：
具体：
[root@u04rdp01 ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/vda1 ext4 40G 6.2G 32G 17% /
tmpfs tmpfs 7.8G 12K 7.8G 1% /dev/shm
/dev/vdb ext4 493G 492G 0 100% /data
[root@u04rdp01 ~]# umount /dev/vdb
[root@u04rdp01 ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/vda1 ext4 40G 6.2G 32G 17% /
tmpfs tmpfs 7.8G 12K 7.8G 1% /dev/shm
[root@u04rdp01 ~]# e2fsck -f /dev/vdb
e2fsck 1.41.12 (17-May-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/vdb: 32929/32768000 files (0.5% non-contiguous), 131018675/131072000 blocks
[root@u04rdp01 ~]# resize2fs /dev/vdb
resize2fs 1.41.12 (17-May-2010)
Resizing the filesystem on /dev/vdb to 262144000 (4k) blocks.
The filesystem on /dev/vdb is now 262144000 blocks long.
[root@u04rdp01 ~]# mount /dev/vdb /data
[root@u04rdp01 ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/vda1 ext4 40G 6.2G 32G 17% /
tmpfs tmpfs 7.8G 12K 7.8G 1% /dev/shm
/dev/vdb ext4 985G 492G 443G 53% /data
//针对xfs文件格式的操作系统（如CentOS7）//
umount /dev/vdb
xfs_repair /dev/vdb
mount /dev/vdb /data
xfs_growfs /data
#美西，# 为了避免阿里云磁盘扩容麻烦直接跳过fdisk分区
fdisk -l
pvcreate /dev/vdb
vgcreate myvg /dev/vdb
lvcreate -l 100%VG -n mylv myvg
mkfs.xfs -f /dev/myvg/mylv
mount /dev/myvg/mylv /data
# vim /etc/fstab
/dev/mapper/myvg-mylv /data xfs defaults 0 0
# 简单扩容
pvcreate /dev/sdb
vgextend centos7_vGroup001 /dev/sdb
lvextend -l +100%FREE /dev/centos7_vGroup001/root
# ext4扩容
# resize2fs /dev/centos7_vGroup001/root
# xfs扩容
# xfs_growfs /dev/centos7_vGroup001/root
云服务在线磁盘扩容
# 为了避免阿里云磁盘扩容麻烦直接跳过fdisk分区
fdisk -l
pvcreate /dev/vdb
vgcreate myvg /dev/vdb
lvcreate -l 100%VG -n mylv myvg
mkfs.xfs -f /dev/myvg/mylv
mkdir /data
mount /dev/myvg/mylv /data
df -Th
echo "/dev/myvg/mylv /data xfs defaults,noatime 0 0" >> /etc/fstab
# aws
pvcreate /dev/nvme1n1
vgcreate myvg /dev/nvme1n1
lvcreate -l +100%VG -n mylv myvg
mkfs.xfs -f /dev/myvg/mylv
mkdir /data
mount /dev/myvg/mylv /data
# vim /etc/fstab
/dev/myvg/mylv /data xfs defaults,noatime 0 0
# /dev/myvg2/mylv2 /ssd xfs defaults,noatime 0 0
# 新版的在线扩容，不需要重启服务器的方法，直接在原有磁盘上加容量，然后执行如下命令，前提是没有对 /dev/vdb 进行 fdisk分区
# xfs 文件格式扩容
pvresize -v /dev/vdb && lvextend -l +100%FREE /dev/myvg/mylv && xfs_growfs /dev/myvg/mylv
# ext4 文件格式扩容
pvresize -v /dev/vdb && lvextend -l +100%FREE /dev/myvg/mylv && resize2fs /dev/myvg/mylv
#################
在线lvm扩容，已经对 /dev/vdb 进行了分区，有了/dev/vdb1，这时候磁盘扩容选择在线扩容
参考https://help.aliyun.com/document_detail/131143.htm?spm=a2c4g.11186623.2.20.ee6d4eb7kwcOVV#task-1797418
# pvresize /dev/vdb1 Physical volume "/dev/vdb1" changed 1 physical volume(s) resized or updated / 0 physical volume(s) not resized # lvextend -L +100GB /dev/myvg/mylv Size of logical volume myvg/mylv changed from <200.00 GiB (51199 extents) to <300.00 GiB (76799 extents). Logical volume myvg/mylv successfully resized. # pvs PV VG Fmt Attr PSize PFree /dev/vdb1 myvg lvm2 a-- <300.00g 100.00g # lvextend -L +100GB /dev/myvg/mylv Size of logical volume myvg/mylv changed from <200.00 GiB (51199 extents) to <300.00 GiB (76799 extents). Logical volume myvg/mylv successfully resized. # resize2fs /dev/myvg/mylv resize2fs 1.42.9 (28-Dec-2013) Filesystem at /dev/myvg/mylv is mounted on /data; on-line resizing required old_desc_blocks = 200, new_desc_blocks = 300 The filesystem on /dev/myvg/mylv is now 157284352 blocks long.
以下命令多测试几次就可以成功了
[root@sz_cc_cbs_download01:~]# growpart /dev/vdb 1 CHANGED: partition=1 start=2048 old: size=629143519 end=629145567 new: size=943716319 end=943718367 [root@sz_cc_cbs_download01:~]# pvs PV VG Fmt Attr PSize PFree /dev/vdb1 myvg lvm2 a-- <300.00g 0 [root@sz_cc_cbs_download01:~]# vgs VG #PV #LV #SN Attr VSize VFree myvg 1 1 0 wz--n- <300.00g 0 [root@sz_cc_cbs_download01:~]# pvs PV VG Fmt Attr PSize PFree /dev/vdb1 myvg lvm2 a-- <300.00g 0 [root@sz_cc_cbs_download01:~]# pvresize /dev/vdb Failed to find physical volume "/dev/vdb". 0 physical volume(s) resized or updated / 0 physical volume(s) not resized [root@sz_cc_cbs_download01:~]# pvresize /dev/vdb1 # 多执行几次 Physical volume "/dev/vdb1" changed 1 physical volume(s) resized or updated / 0 physical volume(s) not resized [root@sz_cc_cbs_download01:~]# pvresize /dev/vdb 1 Failed to find device for physical volume "1". Failed to find physical volume "/dev/vdb". 0 physical volume(s) resized or updated / 0 physical volume(s) not resized [root@sz_cc_cbs_download01:~]# pvs PV VG Fmt Attr PSize PFree /dev/vdb1 myvg lvm2 a-- <450.00g 150.00g
[root@sz_cc_cbs_download01:~]# lvextend -L +150GB /dev/myvg/mylv
Size of logical volume myvg/mylv changed from <300.00 GiB (76799 extents) to <450.00 GiB (115199 extents).
Logical volume myvg/mylv successfully resized.
[root@sz_cc_cbs_download01:~]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
mylv myvg -wi-ao---- <450.00g
[root@sz_cc_cbs_download01:~]# resize2fs /dev/myvg/mylv
resize2fs 1.42.9 (28-Dec-2013)
Filesystem at /dev/myvg/mylv is mounted on /data; on-line resizing required
old_desc_blocks = 300, new_desc_blocks = 450
The filesystem on /dev/myvg/mylv is now 235927552 blocks long.
[root@sz_cc_cbs_download01:~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/vda1 ext4 40G 22G 16G 58% /
devtmpfs devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm
tmpfs tmpfs 3.9G 884K 3.9G 1% /run
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/mapper/myvg-mylv ext4 443G 229G 195G 55% /data
tmpfs tmpfs 783M 0 783M 0% /run/user/0
