sysctl.conf优化
sysctl.conf
Ubuntu server out of box is not optimized to make full use of available hardware. This means “out-of-box” setup might fail under high load.
So we need to tweak system configuration for maximum concurrancy.
Sysctl Tweaks
Open
vim /etc/sysctl.confAdd following towards bottom
### IMPROVE SYSTEM MEMORY MANAGEMENT ###
# Increase size of file handles and inode cache
fs.file-max = 2097152
# Do less swapping
vm.swappiness = 10
vm.dirty_ratio = 60
vm.dirty_background_ratio = 2
### GENERAL NETWORK SECURITY OPTIONS ###
# Number of times SYNACKs for passive TCP connection.
net.ipv4.tcp_synack_retries = 2
# Allowed local port range
net.ipv4.ip_local_port_range = 2000 65535
# Protect Against TCP Time-Wait
net.ipv4.tcp_rfc1337 = 1
# Decrease the time default value for tcp_fin_timeout connection
net.ipv4.tcp_fin_timeout = 15
# Decrease the time default value for connections to keep alive
net.ipv4.tcp_keepalive_time = 300
net.ipv4.tcp_keepalive_probes = 5
net.ipv4.tcp_keepalive_intvl = 15
### TUNING NETWORK PERFORMANCE ###
# Default Socket Receive Buffer
net.core.rmem_default = 31457280
# Maximum Socket Receive Buffer
net.core.rmem_max = 12582912
# Default Socket Send Buffer
net.core.wmem_default = 31457280
# Maximum Socket Send Buffer
net.core.wmem_max = 12582912
# Increase number of incoming connections
net.core.somaxconn = 65536
# Increase number of incoming connections backlog
net.core.netdev_max_backlog = 65536
# Increase the maximum amount of option memory buffers
net.core.optmem_max = 25165824
# Increase the maximum total buffer-space allocatable
# This is measured in units of pages (4096 bytes)
net.ipv4.tcp_mem = 65536 131072 262144
net.ipv4.udp_mem = 65536 131072 262144
# Increase the read-buffer space allocatable
net.ipv4.tcp_rmem = 8192 87380 16777216
net.ipv4.udp_rmem_min = 16384
# Increase the write-buffer-space allocatable
net.ipv4.tcp_wmem = 8192 65536 16777216
net.ipv4.udp_wmem_min = 16384
# Increase the tcp-time-wait buckets pool size to prevent simple DOS attacks
net.ipv4.tcp_max_tw_buckets = 1440000
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_tw_reuse = 1Load Changes
Run following command to load changes to sysctl.
sysctl -pUseful Systcl Commands
This section is added to main post after Ovidiu’s comment.
Show all system parameters with their values (default or changed)
sysctl -AShow values of parameters modified by you
sysctl -pShow value for a single parameter parameter-name
sysctl parameter-nameChange value for a single parameter parameter-name without editing sysctl.conf manually.
sysctl -w parameter-name=parameter-valueAbove command will overwrite any previous modifications to parameter-name. Also, you may need to surround parameter-value with quotes.
Related
I do not have in-depth explanation for all parameters. Comments will guide you somewhat.
You can check https://rtcamp.com/tutorials/linux/increase-open-files-limit/ for more details about fs.file-max
Credits
We do not have expertise to tweak linux at such level. So following links helped. They differ from most configs as they offered some explanation about parameters which helped us understand what we are picking and why!
