摘要:
setenv bootargs console=ttyS1,115200n8 noinitrd rw ip=192.168.1.101:192.168.1.100:192.168.1.1:255.255.255.0:::off eth=00:CC:CC:A0:00:24 root=/dev/nfs nfsroot=192.168.1.247:/home/mao/disk1/workroom/bj_sdk/ipcam/dbvt/filesys, nolock mem=48Mtftpboot 0x80700000 uImage_ipnc_dm365_nfsbootm 0x80700000 阅读全文
摘要:
adsfjajfajdf 阅读全文
摘要:
1 自动安装 samba #sudo apt-get install samba #sudo apt-get install smbclient2 增加共享文件夹在文件/etc/samba/smb.conf结尾添加如下行:[workroom]comment=this is Linux share directorypath=/home/mao/disk1/workroompublic=yeswritable=yes参考Ubuntu下Samba服务器的搭建http://apps.hi.baidu.com/share/detail/31035795 阅读全文
摘要:
嗬嗬嗬嗬嘿嘿嘿 阅读全文
摘要:
1. 用com口连接 PC与目标机2. 按enter 进入uboot模式(现在目标机是用sd卡起动的,不按enter它会加载到内存)3. 输入printenv显示环境变量的值。返回信息baudrate=115200bootargs=console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootwait ip=offbootcmd=if mmc rescan 0; then if fatload mmc 0 0x80600000 boot.scr; then source 0x80600000; else fatload mmc 0 0x80700000 u 阅读全文