poj 1087 C - A Plug for UNIX 网络流最大流

C - A Plug for UNIX
Time Limit: 20 Sec

Memory Limit: 256 MB

题目连接

http://acm.hust.edu.cn/vjudge/contest/view.action?cid=88038#problem/C

Description

You are in charge of setting up the press room for the inaugural meeting of the United Nations Internet eXecutive (UNIX), which has an international mandate to make the free flow of information and ideas on the Internet as cumbersome and bureaucratic as possible. 
Since the room was designed to accommodate reporters and journalists from around the world, it is equipped with electrical receptacles to suit the different shapes of plugs and voltages used by appliances in all of the countries that existed when the room was built. Unfortunately, the room was built many years ago when reporters used very few electric and electronic devices and is equipped with only one receptacle of each type. These days, like everyone else, reporters require many such devices to do their jobs: laptops, cell phones, tape recorders, pagers, coffee pots, microwave ovens, blow dryers, curling 
irons, tooth brushes, etc. Naturally, many of these devices can operate on batteries, but since the meeting is likely to be long and tedious, you want to be able to plug in as many as you can. 
Before the meeting begins, you gather up all the devices that the reporters would like to use, and attempt to set them up. You notice that some of the devices use plugs for which there is no receptacle. You wonder if these devices are from countries that didn't exist when the room was built. For some receptacles, there are several devices that use the corresponding plug. For other receptacles, there are no devices that use the corresponding plug. 
In order to try to solve the problem you visit a nearby parts supply store. The store sells adapters that allow one type of plug to be used in a different type of outlet. Moreover, adapters are allowed to be plugged into other adapters. The store does not have adapters for all possible combinations of plugs and receptacles, but there is essentially an unlimited supply of the ones they do have.

Input

The input will consist of one case. The first line contains a single positive integer n (1 <= n <= 100) indicating the number of receptacles in the room. The next n lines list the receptacle types found in the room. Each receptacle type consists of a string of at most 24 alphanumeric characters. The next line contains a single positive integer m (1 <= m <= 100) indicating the number of devices you would like to plug in. Each of the next m lines lists the name of a device followed by the type of plug it uses (which is identical to the type of receptacle it requires). A device name is a string of at most 24 alphanumeric 
characters. No two devices will have exactly the same name. The plug type is separated from the device name by a space. The next line contains a single positive integer k (1 <= k <= 100) indicating the number of different varieties of adapters that are available. Each of the next k lines describes a variety of adapter, giving the type of receptacle provided by the adapter, followed by a space, followed by the type of plug.

Output

A line containing a single non-negative integer indicating the smallest number of devices that cannot be plugged in.

Sample Input

4
A
B
C
D
5
laptop B
phone C
pager B
clock B
comb X
3
B X
X A
X D

Sample Output

1

HINT

 

题意

有n个插座，m个机器，每个机器分别需要xi的插座，你有k个转换头，可以把ai插座转化为bi插座

然后问你最后最少多少个机器不能充电  

题解：

s-插座-机器-t

对于转换器，就直接ai->bi，cap=inf就好了

不需要拆点

代码：

//qscqesze
#include <cstdio>
#include <cmath>
#include <cstring>
#include <ctime>
#include <iostream>
#include <algorithm>
#include <set>
#include <vector>
#include <sstream>
#include <queue>
#include <typeinfo>
#include <fstream>
#include <map>
#include <stack>
typedef long long ll;
using namespace std;
//freopen("D.in","r",stdin);
//freopen("D.out","w",stdout);
#define sspeed ios_base::sync_with_stdio(0);cin.tie(0)
#define maxn 5000
#define mod 10007
#define eps 1e-9
int Num;
//const int inf=0x7fffffff;   //нчоч╢С
const int inf=0x3f3f3f3f;
inline ll read()
{
    ll x=0,f=1;char ch=getchar();
    while(ch<'0'||ch>'9'){if(ch=='-')f=-1;ch=getchar();}
    while(ch>='0'&&ch<='9'){x=x*10+ch-'0';ch=getchar();}
    return x*f;
}
//**************************************************************************************
namespace NetFlow
{
    const int MAXN=100000,MAXM=100000,inf=1e9;
    struct Edge
    {
        int v,c,f,nx;
        Edge() {}
        Edge(int v,int c,int f,int nx):v(v),c(c),f(f),nx(nx) {}
    } E[MAXM];
    int G[MAXN],cur[MAXN],pre[MAXN],dis[MAXN],gap[MAXN],N,sz;
    void init(int _n)
    {
        N=_n,sz=0; memset(G,-1,sizeof(G[0])*N);
    }
    void link(int u,int v,int c)
    {
        E[sz]=Edge(v,c,0,G[u]); G[u]=sz++;
        E[sz]=Edge(u,0,0,G[v]); G[v]=sz++;
    }
    int ISAP(int S,int T)
    {//S -> T
        int maxflow=0,aug=inf,flag=false,u,v;
        for (int i=0;i<N;++i)cur[i]=G[i],gap[i]=dis[i]=0;
        for (gap[S]=N,u=pre[S]=S;dis[S]<N;flag=false)
        {
            for (int &it=cur[u];~it;it=E[it].nx)
            {
                if (E[it].c>E[it].f&&dis[u]==dis[v=E[it].v]+1)
                {
                    if (aug>E[it].c-E[it].f) aug=E[it].c-E[it].f;
                    pre[v]=u,u=v; flag=true;
                    if (u==T)
                    {
                        for (maxflow+=aug;u!=S;)
                        {
                            E[cur[u=pre[u]]].f+=aug;
                            E[cur[u]^1].f-=aug;
                        }
                        aug=inf;
                    }
                    break;
                }
            }
            if (flag) continue;
            int mx=N;
            for (int it=G[u];~it;it=E[it].nx)
            {
                if (E[it].c>E[it].f&&dis[E[it].v]<mx)
                {
                    mx=dis[E[it].v]; cur[u]=it;
                }
            }
            if ((--gap[dis[u]])==0) break;
            ++gap[dis[u]=mx+1]; u=pre[u];
        }
        return maxflow;
    }
    bool bfs(int S,int T)
    {
        static int Q[MAXN]; memset(dis,-1,sizeof(dis[0])*N);
        dis[S]=0; Q[0]=S;
        for (int h=0,t=1,u,v,it;h<t;++h)
        {
            for (u=Q[h],it=G[u];~it;it=E[it].nx)
            {
                if (dis[v=E[it].v]==-1&&E[it].c>E[it].f)
                {
                    dis[v]=dis[u]+1; Q[t++]=v;
                }
            }
        }
        return dis[T]!=-1;
    }
    int dfs(int u,int T,int low)
    {
        if (u==T) return low;
        int ret=0,tmp,v;
        for (int &it=cur[u];~it&&ret<low;it=E[it].nx)
        {
            if (dis[v=E[it].v]==dis[u]+1&&E[it].c>E[it].f)
            {
                if (tmp=dfs(v,T,min(low-ret,E[it].c-E[it].f)))
                {
                    ret+=tmp; E[it].f+=tmp; E[it^1].f-=tmp;
                }
            }
        }
        if (!ret) dis[u]=-1; return ret;
    }
    int dinic(int S,int T)
    {
        int maxflow=0,tmp;
        while (bfs(S,T))
        {
            memcpy(cur,G,sizeof(G[0])*N);
            while (tmp=dfs(S,T,inf)) maxflow+=tmp;
        }
        return maxflow;
    }
}
using namespace NetFlow;
map<string,int>H;
int main()
{
    init(10000);
    string s,s1,s2;
    int nn=read();
    int tot=105;
    for(int i=1;i<=nn;i++)
    {
        cin>>s;
        H[s]=tot++;
        link(H[s],2,1);
    }
    int mm=read();
    for(int i=1;i<=mm;i++)
    {
        cin>>s1>>s2;
        if(!H[s2])
            H[s2]=tot++;
        link(1,i+2,1);
        link(i+2,H[s2],1);
    }
    int kk=read();
    for(int i=1;i<=kk;i++)
    {
        cin>>s1>>s2;
        if(!H[s1])
            H[s1]=tot++;
        if(!H[s2])
            H[s2]=tot++;
        link(H[s1],H[s2],199999);
    }
    printf("%d\n",mm-dinic(1,2));
}