IPv6无状态自动配置功能配合DHCPv6无状态配置功能 实现IPv6自动分配

以H3C S7500E为例，以下是我的配置：

version 5.20, Release 6616
#
sysname TC_S7506E_01
#
super password level 3 cipher

#
domain default enable system
#
ipv6
#
telnet server enable
#
ip ttl-expires enable
#
switch-mode standard
switch-mode normal slot 2
switch-mode normal slot 3
synchronization mac-address enable
#
ipv6 dhcp server enable
#
vlan 1
#
vlan 32 to 63
#
radius scheme office
server-type extended
primary authentication 192.168.9.1
primary accounting 192.168.9.1
key authentication metc
key accounting metc
user-name-format without-domain
#
domain system
  access-limit disable
state active
idle-cut disable
#
dhcp server ip-pool vlan32
network 192.168.32.0 mask 255.255.255.0
gateway-list 192.168.32.254
dns-list *****************
domain-name *.edu.cn
expired day 60
#
dhcp server ip-pool vlan33
network 192.168.33.0 mask 255.255.255.0
gateway-list 192.168.33.254
dns-list ************
domain-name *.edu.cn
expired day 60
#              
dhcp server ip-pool vlan34
network 192.168.34.0 mask 255.255.255.0
gateway-list 192.168.34.254
dns-list ***********
domain-name *.edu.cn
expired day 60
#

ipv6 dhcp pool 1
domain-name *6.edu.cn
dns-server *:*:*::1::3
dns-server *:*:*::1::4
#
interface NULL0
#
interface Vlan-interface1
ip address 192.168.1.254 255.255.255.0
#
interface Vlan-interface32
ipv6 address *:*:*:*::1/64
undo ipv6 nd ra halt
ipv6 nd autoconfig other-flag
ip address 192.168.32.254 255.255.255.0
ipv6 dhcp server apply pool 1
#
interface Vlan-interface33
ipv6 address *:*:*:*::1/64
undo ipv6 nd ra halt
ipv6 nd autoconfig other-flag
ip address 192.168.33.254 255.255.255.0
ipv6 dhcp server apply pool 1
#
interface Vlan-interface34
ipv6 address *:*:*:*::1/64
undo ipv6 nd ra halt
ipv6 nd autoconfig other-flag
ip address 192.168.34.254 255.255.255.0
ipv6 dhcp server apply pool 1
#

interface GigabitEthernet3/0/47
port link-mode route
description OSPF_S8512_01_GI_2_1_1
ipv6 address FEC0::C0A8:C82A/126
ospfv3 1 area 0.0.0.0
duplex full
speed 1000
ip address 192.168.200.42 255.255.255.252
#
interface GigabitEthernet3/0/48
port link-mode route
description OSPF_S8512_02_GI_2_1_1
ipv6 address FEC0::C0A8:C83E/126
ospfv3 1 area 0.0.0.0
duplex full
speed 1000
ip address 192.168.200.62 255.255.255.252

interface GigabitEthernet3/0/1
port link-mode bridge
description To_Dormitory_1#_F1
port link-type trunk
port trunk permit vlan 1 32
#              
interface GigabitEthernet3/0/2
port link-mode bridge
description To_Dormitory_1#_F2
port link-type trunk
port trunk permit vlan 1 33
#
interface GigabitEthernet3/0/3
port link-mode bridge
description To_Dormitory_1#_F3
port link-type trunk
port trunk permit vlan 1 34
#

ospf 1
import-route direct
area 0.0.0.0
  network 192.168.200.40 0.0.0.3
  network 192.168.200.60 0.0.0.3
#
ospfv3 1
#

dhcp enable
#

arp source-suppression enable
arp detection validate dst-mac ip src-mac
#