fs.1.10 ON rockeylinux8 dockerfile模式

 

概述

freeswitch是一款简单好用的VOIP开源软交换平台。

rockeylinux8 docker上编译安装fs.1.10的流程记录，本文使用dockerfile模式。

环境

docker engine：Version 24.0.6

rockylinux docker：8

freeswitch：v1.10.7

dockerfile

创建空目录，创建dockerfile文件。

github访问经常失败，先下载好源码包，并将fs.1.10.7源码文件夹拷贝到目录下。

mkdir rockylinux.8-fs.1.10

cd rockylinux.8-fs.1.10

git clone https://github.com/signalwire/freeswitch.git -bv1.10.7 freeswitch-1.10.7

ls

dockerfile freeswitch-1.10.7

 

dockerfile文件内容如下。

vi dockerfile

FROM rockylinux:8

WORKDIR /root

ADD ./freeswitch-1.10.7 /root/freeswitch

RUN cd /root/ \
&& dnf install 'dnf-command(config-manager)' -y \
&& dnf config-manager --set-enabled powertools \
&& echo "signalwire" > /etc/yum/vars/signalwireusername \
&& echo "TOKEN" > /etc/yum/vars/signalwiretoken \
&& dnf install -y https://$(< /etc/yum/vars/signalwireusername):$(< /etc/yum/vars/signalwiretoken)@freeswitch.signalwire.com/repo/yum/centos-release/freeswitch-release-repo-0-1.noarch.rpm \
&& dnf install -y epel-release -y \
&& dnf makecache \
&& dnf -y update \
&& dnf remove -y spandsp-devel spandsp \
&& dnf install -y sofia-sip-devel spandsp3-devel libks signalwire-client-c erlang postgresql-devel libtool python2-devel gcc-c++ zlib-devel libpng-devel sqlite-devel libcurl-devel pcre-devel speex-devel speexdsp-devel ldns-devel libedit-devel ilbc2-devel opus-devel lua-devel libsndfile-devel \
&& dnf install -y which tzdata yasm git \
&& cd /root/freeswitch/ \
&& chmod 775 -R * \
&& ./bootstrap.sh -j \
&& ./configure \
&& cd /root/freeswitch/src/mod/codecs/mod_g729/ \
&& make \
&& cd /root/freeswitch/ \
&& make \
&& make install \
&& cd /root/freeswitch/src/mod/codecs/mod_ilbc \
&& make \
&& make install \
&& cd /root/freeswitch/src/mod/applications/mod_translate \
&& make \
&& make install \
&& cd /root/freeswitch/src/mod/applications/mod_distributor \
&& make \
&& make install \
&& cp /usr/share/zoneinfo/Asia/Shanghai /etc/localtime \
&& dnf -y autoremove \
&& dnf clean all \
&& rm -rf /var/cache/dnf/* \
&& rm -rf /root/freeswitch \
&& rm -rf /usr/share/icons /usr/share/themes/ /usr/share/doc /usr/share/man \
&& rm -rf /usr/local/freeswitch/conf /usr/local/freeswitch/log /usr/local/freeswitch/recordings

# EXPOSE 5080

VOLUME ["/usr/local/freeswitch/conf", "/usr/local/freeswitch/log", "/usr/local/freeswitch/recordings", "/usr/local/freeswitch/sounds", "/usr/local/freeswitch/webapp"]

CMD /usr/local/freeswitch/bin/freeswitch -nonat -nosql -nonatmap -nocal -nort

镜像操作

制作镜像，注意命令最后一个参数是当前目录“.“。

sudo docker build --no-cache -t 10.55.55.136:5000/zr/rockylinux.8-fs.1.10-release:v1.1.1 .

 

上传镜像到registry。

sudo docker images

sudo docker push 10.55.55.136:5000/zr/rockylinux.8-fs.1.10-release:v1.1.1

 

下载镜像。

sudo docker pull 10.55.55.136:5000/zr/rockylinux.8-fs.1.10-release:v1.1.1

 

启动容器

sudo docker run -itd --net=host -v /home/adminx/docker/rockylinux.8-fs.1.6.19/fs-sbc/conf:/usr/local/freeswitch/conf -v /usr/local/freeswitch/log:/usr/local/freeswitch/log -v /usr/local/freeswitch/recordings:/usr/local/freeswitch/recordings --name rockylinux.8-fs.1.10-sbc 10.55.55.136:5000/zr/rockylinux.8-fs.1.10-release:v1.1.1 /usr/local/freeswitch/bin/freeswitch -nonat -nosql -nonatmap -nocal -nort

sudo docker logs rockylinux.8-fs.1.10-sbc

sudo docker exec -it rockylinux.8-fs.1.10-sbc /usr/local/freeswitch/bin/fs_cli -x status

sudo docker rm -f rockylinux.8-fs.1.10-sbc

总结

编译出的docker镜像还是比较大，需要持续瘦身。

centos和rocky的方向需要验证和抉择一下。

 

空空如常

求真得真