List methods
Table 6.12. Constructors and Destructor of Lists Operation Effect
list<Elem> c Creates an empty list without any elements
list<Elem> c1(c2) Creates a copy of another list of the same type (all elements are copied)
list<Elem> c(n) Creates a list with n elements that are created by the default constructor
list<Elem> c(n,elem) Creates a list initialized with n copies of element elem
list<Elem> c (beg,end) Creates a list initialized with the elements of the range [beg,end)
c.~list<Elem>() Destroys all elements and frees the
memory
Table 6.13. Nonmodifying Operations of Lists Operation Effect
c.size() Returns the actual number of elements
c. empty () Returns whether the container is empty (equivalent to size()==0, but might be faster)
c.max_size() Returns the maximum number of elements possible
c1 == c2 Returns whether c1 is equal to c2
c1 != c2 Returns whether c1 is not equal to c2 (equivalent to ! (c1==c2))
c1 < c2 Returns whether c1 is less than c2
c1 > c2 Returns whether c1 is greater than c2 (equivalent to c2<c1)
c1 <= c2 Returns whether c1 is less than or equal to c2 (equivalent to ! (c2<c1) )
c1 >= c2 Returns whether c1 is greater than or equal to c2 (equivalent to ! (c1<c2))
Table 6.14. Assignment Operations of Lists Operation Effect
c1 = c2 Assigns all elements of c2 to c1
c.assign(n,elem) Assigns n copies of element elem
c.assign(beg,end) Assigns the elements of the range [beg,end)
c1.swap(c2) Swaps the data of c1 and c2
swap(c1,c2) Same (as global function)
Table 6.15. Direct Element Access of Lists Operation Effect
c.front() Returns the first element (no check whether a first element exists)
c.back() Returns the last element (no check whether a last element exists)
Table 6.16. Iterator Operations of Lists Operation Effect
c.begin() Returns a bidirectional iterator for the first element
c.end() Returns a bidirectional iterator for the position after the last element
c.rbegin() Returns a reverse iterator for the first element of a reverse iteration
c.rend() Returns a reverse iterator for the position after the last element of a reverse iteration
Table 6.17. Insert and Remove Operations of Lists Operation Effect
c.insert (pos, elem) Inserts at iterator position pos a copy of elem and returns the position of the new element
c.insert (pos,n, elem) Inserts at iterator position pos n copies of elem (returns nothing)
c. insert (pos, beg,end) Inserts at iterator position pos a copy of all elements of the range [beg,end) (returns nothing)
c.push_back(elem) Appends a copy of elem at the end
c.pop_back() Removes the last element (does not return it)
c.push_front(elem) Inserts a copy of elem at the beginning
c.pop_front () Removes the first element (does not return it)
c. remove (val) Removes all elements with value val
c.remove_if (op) Removes all elements for which op(elem) yields true
c. erase (pos) Removes the element at iterator position pos and returns the position of the next element
c.erase (beg,end) Removes all elements of the range [beg,end) and returns the position of the next element
c. resize (num) Changes the number of elements to num (if size() grows, new elements are created by their default constructor)
c.resize (num, elem) Changes the number of elements to num (if size ( ) grows, new elements are copies of elem)
c. clear () Removes all elements (makes the container empty)
Table 6.18. Special Modifying Operations for Lists Operation Effect
c.unique() Removes duplicates of consecutive elements with the same value
c.unique(op) Removes duplicates of consecutive elements, for which op() yields true
c1.splice(pos,c2) Moves all elements of c2 to c1 in front of the iterator position pos
c1.splice(pos,c2,c2pos) Moves the element at c2pos in c2 in front of pos of list c1 (c1 and c2 may be identical)
c1.splice(pos,c2,c2beg,c2end) Moves all elements of the range [c2beg,c2end) in c2 in front of pos of list c1 (c1 and c2 may be identical)
c.sort() Sorts all elements with operator <
c.sort(op) Sorts all elements with op()
c1.merge(c2) Assuming both containers contain the elements sorted, moves all elements of c2 into c1 so that all elements are merged and still sorted
c1.merge(c2,op) Assuming both containers contain the elements sorted due to the sorting criterion op(), moves all elements of c2 into c1 so that all elements are merged and still sorted according to op()
c.reverse() Reverses the order of all elements
Examples of Using Lists
The following example in particular shows the use of the special member functions for lists:
// cont/list1.cpp
#include <iostream>
#include <list>
#include <algorithm>
using namespace std;
void printLists (const list<int>& 11, const list<int>& 12)
{
cout << "list1: ";
copy (l1.begin(), l1.end(), ostream_iterator<int>(cout," "));
cout << endl << "list2: ";
copy (12.begin(), 12.end(), ostream_iterator<int>(cout," "));
cout << endl << endl;
}
int main()
{
//create two empty lists
list<int> list1, list2;
//fill both lists with elements
for (int i=0; i<6; ++i) {
list1.push_back(i);
list2.push_front(i);
}
printLists(list1, list2);
//insert all elements of list1 before the first element with value 3 of list2
//-find() returns an iterator to the first element with value 3
list2.splice(find(list2.begin(),list2.end(), // destination position
3),
list1); // source list
printLists(list1, list2);
//move first element to the end
list2.splice(list2.end(), // destination position
list2, // source list
list2.begin()); // source position
printLists(list1, list2);
//sort second list, assign to list1 and remove duplicates
list2.sort();
list1 = list2;
list2.unique();
printLists(list1, list2);
//merge both sorted lists into the first list
list1.merge(list2);
printLists(list1, list2);
}
The program has the following output:
list1: 0 1 2 3 4 5
list2: 5 4 3 2 1 0
list1:
list2: 5 4 0 1 2 3 4 5 3 2 1 0
list1:
list2: 4 0 1 2 3 4 5 3 2 1 0 5
list1: 0 0 1 1 2 2 3 3 4 4 5 5
list2: 0 1 2 3 4 5
list1: 0 0 0 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5
list2:
Vector的
//建立一个向量并为之分配内存
std::vector<int> v; // create an empty vector
v.reserve (80); // reserve memory for 80 elements
//建立一个向量,并用默认的构造函数初始化,因此速度较慢
std::vector<T> v(5); // creates a vector and initializes it with five values
// (calls five times the default constructor of type T)
Table 6.2. Constructors and Destructors of Vectors Operation Effect
vector<Elem> c Creates an empty vector without any elements
vector<Elem> c1(c2) Creates a copy of another vector of the same type (all elements are copied)
vector<Elem> c(n) Creates a vector with n elements that are created by the default constructor
vector<Elem> c(n,elem) Creates a vector initialized with n copies of element elem
vector<Elem> c(beg,end) Creates a vector initialized with the elements of the range [beg,end)
c.~vector<Elem>() Destroys all elements and frees the memory
Table 6.3. Nonmodifying Operations of Vectors Operation Effect
c.size() Returns the actual number of elements
c.empty() Returns whether the container is empty (equivalent to size()==0, but might be faster)
c.max_size() Returns the maximum number of elements possible
capacity() Returns the maximum possible number of elements without reallocation
reserve() Enlarges capacity, if not enough yet[7] //如果不够的话就继续分配内存
c1 == c2 Returns whether c1 is equal to c2
c1 != c2 Returns whether c1 is not equal to c2 (equivalent to ! (c1==c2))
c1 < c2 Returns whether c1 is less than c2
c1 > c2 Returns whether c1 is greater than c2 (equivalent to c2<c1)
c1 <= c2 Returns whether c1 is less than or equal to c2 (equivalent to ! (c2<c1))
c1 >= c2 Returns whether c1 is greater than or equal to c2 (equivalent to ! (c1<c2))
Table 6.4. Assignment Operations of Vectors Operation Effect
c1 = c2 Assigns all elements of c2 to c1
c.assign(n,elem) Assigns n copies of element elem
c.assign(beg,end) Assigns the elements of the range [beg,end)
c1.swap(c2) Swaps the data of c1 and c2
swap(c1,c2) Same (as global function)
Table 6.5. Direct Element Access of Vectors Operation Effect
c.at(idx) Returns the element with index idx (throws range error exception if idx is out of range)
c[idx] Returns the element with index idx (no range checking)
c.front() Returns the first element (no check whether a first element exists)
c.back() Returns the last element (no check whether a last element exists)
通过at来访问元素的时候如果越界会有一个out_of_range异常
用[]重载来访问的时候只会报错
Table 6.6. Iterator Operations of Vectors Operation Effect
c.begin() Returns a random access iterator for the first element
c.end() Returns a random access iterator for the position after the last element
c.rbegin() Returns a reverse iterator for the first element of a reverse iteration
c.rend() Returns a reverse iterator for the position after the last element of a reverse iteration
Table 6.7. Insert and Remove Operations of Vectors Operation Effect
c.insert(pos,elem) Inserts at iterator position pos a copy of elem and returns the position of the new element
c.insert(pos,n,elem) Inserts at iterator position pos n copies of elem (returns nothing)
c.insert(pos,beg,end) Inserts at iterator position pos a copy of all elements of the range [beg,end) (returns nothing)
c.push_back(elem) Appends a copy of elem at the end
c.pop_back() Removes the last element (does not return it)
c.erase(pos) Removes the element at iterator position pos and returns the position of the next element
c.erase(beg,end) Removes all elements of the range [beg,end) and returns the position of the next element
c.resize(num) Changes the number of elements to num (if size() grows, new elements are created by their default constructor)
c.resize(num,elem) Changes the number of elements to num (if size() grows, new elements are copies of elem)
c.clear() Removes all elements (makes the container empty)
std::vector<Elem> coll;
...
//remove all elements with value val
coll.erase(remove(coll.begin(),coll.end(),
val),
coll.end());
std::vector<Elem> coll;
...
//remove first element with value val
std::vector<Elem>::iterator pos;
pos = find(coll.begin(),coll.end(),
val);
if (pos != coll.end()) {
coll.erase(pos);
}
vector<bool>有特殊的函数
Table 6.8. Special Operations of vector<bool> Operation Effect
c.flip() Negates all Boolean elements (complement of all bits)
m[idx].flip() Negates the Boolean element with index idx (complement of a single bit)
m[idx] = val Assigns val to the Boolean element with index idx (assignment to a single bit)
m[idx1] = m[idx2] Assigns the value of the element with index idx2 to the element with index idx1
Examples of Using Vectors
The following example shows a simple usage of vectors:
// cont/vector1.cpp
#include <iostream>
#include <vector>
#include <string>
#include <algorithm>
using namespace std;
int main()
{
//create empty vector for strings
vector<string> sentence;
//reserve memory for five elements to avoid reallocation
sentence.reserve(5);
//append some elements
sentence.push_back("Hello,");
sentence.push_back("how");
sentence.push_back("are");
sentence.push_back("you");
sentence.push_back("?");
//print elements separated with spaces
copy (sentence.begin(), sentence.end(),
ostream_iterator<string>(cout," "));
cout << endl;
//print ''technical data''
cout << " max_size(): " << sentence.max_size() << endl;
cout << " size(): " << sentence.size() << endl;
cout << " capacity(): " << sentence.capacity() << endl;
//swap second and fourth element
swap (sentence[1], sentence [3]);
//insert element "always" before element "?"
sentence.insert (find(sentence.begin(),sentence.end(),"?"),
"always");
//assign "!" to the last element
sentence.back() = "!";
//print elements separated with spaces
copy (sentence.begin(), sentence.end(),
ostream_iterator<string>(cout," "));
cout << endl;
//print "technical data" again
cout << " max_size(): " << sentence.max_size() << endl;
cout << " size(): " << sentence.size() << endl;
cout << " capacity(): " << sentence.capacity() << endl;
}
The output of the program might look like this:
Hello, how are you ?
max_size(): 268435455
size(): 5
capacity(): 5
Hello, you are how always !
max_size(): 268435455
size(): 6
capacity(): 10
作者:麒麟子
出处:http://www.cnblogs.com/qilinzi/
蛮牛专栏:麒麟子
简介:麒麟子,编程15年,科技创始人,技术作家。
09年进入游戏行业,16年创立成都幼麟科技有限公司。十年从业经验练就了游戏全栈技能,目前专注于手机游戏领域。
版权声明:本文版权归作者和博客园共有,欢迎转载。转载必须保留此段声明,且在文章页面明显位置给出原文连接,否则保留追究法律责任的权利。