neutron用linux_bridge部署provider网络
网卡配置:
# The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 172.16.13.134 netmask 255.255.255.0 gateway 172.16.13.2 dns-nameservers 114.114.114.114 auto eth1 iface eth1 inet manual up ip link set dev $IFACE up down ip link set dev $IFACE down auto brq6bf61a06-79 iface brq6bf61a06-79 inet manual bridge_ports eth1 up ip link set dev $IFACE up down ip link set dev $IFACE down
ml2_conf.ini
[ml2_type_flat]
flat_networks = provider
linuxbridge_agent.ini:
[linux_bridge] physical_interface_mappings = provider:eth1 bridge_mappings = provider:brq6bf61a06-79
混杂模式: