mtd零星记录
查看Flash分区情况: root@DD-WRT:~# cat /proc/mtd dev: size erasesize name mtd0: 00020000 00010000 "RedBoot" mtd1: 007c0000 00010000 "linux" mtd2: 00270000 00010000 "rootfs" mtd3: 00410000 00010000 "ddwrt" mtd4: 00010000 00010000 "nvram" mtd5: 00010000 00010000 "board_config" mtd6: 00800000 00010000 "fullflash" mtd7: 00020000 00010000 "fullboot" root@DD-WRT:~# 用dd备份分区(如果有fullash分区) root@DD-WRT:~# dd if=/dev/mtd6 of=/tmp/741_fullflash.bin 16384+0 records in 16384+0 records out root@DD-WRT:~# 刷成编程器固件命令(前提是有fullash分区) root@DD-WRT:~# mtd -r write fullflash /tmp/741_fullflash.bin 16384+0 records in 16384+0 records out root@DD-WRT:~# 编程openwrt固件时修改mach-tl-mr3x20.c(对应3420)增加一个fullash }, { .name = "fullflash", .offset = 0, .size = 0x800000, .mask_flags = MTD_WRITEABLE, } .size = 0x800000, 这个是flash大小8M 去掉 .mask_flags = MTD_WRITEABLE,是分区可以写,否者只可读 MTD subsystem has the following interfaces. MTD character devices - usually referred to as /dev/mtd0, /dev/mtd1, and so on. These character devices provide I/O access to the raw flash. They support a number of ioctl calls for erasing eraseblocks, marking them as bad or checking if an eraseblock is bad, getting information about MTD devices, etc. The sysfs interface is relatively newer and it provides full information about each MTD device in the system. This interface is easily extensible and developers are encouraged to use the sysfs interface instead of older ioctl or /proc/mtd interfaces, when possible. The sysfs interface for the mtd subsystem is documentated in the kernel, and currently can be found at Documentation/ABI/testing/sysfs-class-mtd. The /proc/mtd proc file system file provides general MTD information. This is a legacy interface and the sysfs interface provides more information.
——————
无论在哪里做什么,只要坚持服务、创新、创造价值,其他的东西自然都会来的。
无论在哪里做什么,只要坚持服务、创新、创造价值,其他的东西自然都会来的。
【推荐】编程新体验,更懂你的AI,立即体验豆包MarsCode编程助手
【推荐】凌霞软件回馈社区,博客园 & 1Panel & Halo 联合会员上线
【推荐】抖音旗下AI助手豆包,你的智能百科全书,全免费不限次数
【推荐】轻量又高性能的 SSH 工具 IShell:AI 加持,快人一步