docker部署harbor私有仓库

官方Github地址: 　　　　

　　https://github.com/goharbor/harbor

资源下载地址：

　　https://github.com/goharbor/harbor/releases

　　由于国内网络环境直接，下载离线安装包：
　　harbor-offline-installer-v2.3.4.tgz

环境准备：

　　harbor 离线安装通过docker-copose来实现容器组的管理

　　docker 安装

　　https://docs.docker.com/engine/install/centos/

　　docker-compose安装

　　https://docs.docker.com/compose/install/

部署

　　解压文件：

　　[root@srv-252 install-file]# tar -zxvf harbor-offline-installer-v2.3.4.tgz

[root@srv-252 install-file]# ll
总用量 593196
drwxr-xr-x 2 root root 122 11月 16 10:07 harbor
-rw-r--r-- 1 root root 607432634 11月 16 10:03 harbor-offline-installer-v2.3.4.tgz
[root@srv-252 install-file]# cd harbor/
[root@srv-252 harbor]# ll
总用量 596284
-rw-r--r-- 1 root root 3361 11月 9 19:01 common.sh
-rw-r--r-- 1 root root 610560420 11月 9 19:01 harbor.v2.3.4.tar.gz
-rw-r--r-- 1 root root 7840 11月 9 19:01 harbor.yml.tmpl
-rwxr-xr-x 1 root root 2500 11月 9 19:01 install.sh
-rw-r--r-- 1 root root 11347 11月 9 19:01 LICENSE
-rwxr-xr-x 1 root root 1881 11月 9 19:01 prepare

准备配置文件

[root@srv-252 harbor]# cp harbor.yml.tmpl harbor.yml

[root@srv-252 harbor]# cat harbor.yml
# Configuration file of Harbor

# The IP address or hostname to access admin UI and registry service.
# DO NOT use localhost or 127.0.0.1, because Harbor needs to be accessed by external clients.
hostname: 192.168.1.252  #访问域名或者主机IP

# http related config
http:
# port for http, default is 80. If https enabled, this port will redirect to https port
port: 8060    #web访问以及镜像获取端口-http

# https related config
#https:
# https port for harbor, default is 443
#port: 8443   #web访问以及镜像获取端口-https
# The path of cert and key files for nginx
#certificate: /your/certificate/path
#private_key: /your/private/key/path

# # Uncomment following will enable tls communication between all harbor components
# internal_tls:
# # set enabled to true means internal tls is enabled
# enabled: true
# # put your cert and key files on dir
# dir: /etc/harbor/tls/internal

# Uncomment external_url if you want to enable external proxy
# And when it enabled the hostname will no longer used
# external_url: https://reg.mydomain.com:8433

# The initial password of Harbor admin
# It only works in first time to install harbor
# Remember Change the admin password from UI after launching Harbor.
harbor_admin_password: cR5Z9DN4IFGOsh3d   #harber 默认admin密码

# Harbor DB configuration
database:
# The password for the root user of Harbor DB. Change this before any production use.
password: root123
# The maximum number of connections in the idle connection pool. If it <=0, no idle connections are retained.
max_idle_conns: 100
# The maximum number of open connections to the database. If it <= 0, then there is no limit on the number of open connections.
# Note: the default number of connections is 1024 for postgres of harbor.
max_open_conns: 900

# The default data volume
data_volume: /data

# Harbor Storage settings by default is using /data dir on local filesystem
# Uncomment storage_service setting If you want to using external storage
# storage_service:
# # ca_bundle is the path to the custom root ca certificate, which will be injected into the truststore
# # of registry's and chart repository's containers. This is usually needed when the user hosts a internal storage with self signed certificate.
# ca_bundle:

# # storage backend, default is filesystem, options include filesystem, azure, gcs, s3, swift and oss
# # for more info about this configuration please refer https://docs.docker.com/registry/configuration/
# filesystem:
# maxthreads: 100
# # set disable to true when you want to disable registry redirect
# redirect:
# disabled: false

# Trivy configuration
#
# Trivy DB contains vulnerability information from NVD, Red Hat, and many other upstream vulnerability databases.
# It is downloaded by Trivy from the GitHub release page https://github.com/aquasecurity/trivy-db/releases and cached
# in the local file system. In addition, the database contains the update timestamp so Trivy can detect whether it
# should download a newer version from the Internet or use the cached one. Currently, the database is updated every
# 12 hours and published as a new release to GitHub.
trivy:
# ignoreUnfixed The flag to display only fixed vulnerabilities
ignore_unfixed: false
# skipUpdate The flag to enable or disable Trivy DB downloads from GitHub
#
# You might want to enable this flag in test or CI/CD environments to avoid GitHub rate limiting issues.
# If the flag is enabled you have to download the `trivy-offline.tar.gz` archive manually, extract `trivy.db` and
# `metadata.json` files and mount them in the `/home/scanner/.cache/trivy/db` path.
skip_update: false
#
# insecure The flag to skip verifying registry certificate
insecure: false
# github_token The GitHub access token to download Trivy DB
#
# Anonymous downloads from GitHub are subject to the limit of 60 requests per hour. Normally such rate limit is enough
# for production operations. If, for any reason, it's not enough, you could increase the rate limit to 5000
# requests per hour by specifying the GitHub access token. For more details on GitHub rate limiting please consult
# https://developer.github.com/v3/#rate-limiting
#
# You can create a GitHub token by following the instructions in
# https://help.github.com/en/github/authenticating-to-github/creating-a-personal-access-token-for-the-command-line
#
# github_token: xxx

jobservice:
# Maximum number of job workers in job service
max_job_workers: 10

notification:
# Maximum retry count for webhook job
webhook_job_max_retry: 10

chart:
# Change the value of absolute_url to enabled can enable absolute url in chart
absolute_url: disabled

# Log configurations
log:
# options are debug, info, warning, error, fatal
level: info
# configs for logs in local storage
local:
# Log files are rotated log_rotate_count times before being removed. If count is 0, old versions are removed rather than rotated.
rotate_count: 50
# Log files are rotated only if they grow bigger than log_rotate_size bytes. If size is followed by k, the size is assumed to be in kilobytes.
# If the M is used, the size is in megabytes, and if G is used, the size is in gigabytes. So size 100, size 100k, size 100M and size 100G
# are all valid.
rotate_size: 200M
# The directory on your host that store log
location: /var/log/harbor

# Uncomment following lines to enable external syslog endpoint.
# external_endpoint:
# # protocol used to transmit log to external endpoint, options is tcp or udp
# protocol: tcp
# # The host of external endpoint
# host: localhost
# # Port of external endpoint
# port: 5140

#This attribute is for migrator to detect the version of the .cfg file, DO NOT MODIFY!
_version: 2.3.0

# Uncomment external_database if using external database.
# external_database:
# harbor:
# host: harbor_db_host
# port: harbor_db_port
# db_name: harbor_db_name
# username: harbor_db_username
# password: harbor_db_password
# ssl_mode: disable
# max_idle_conns: 2
# max_open_conns: 0
# notary_signer:
# host: notary_signer_db_host
# port: notary_signer_db_port
# db_name: notary_signer_db_name
# username: notary_signer_db_username
# password: notary_signer_db_password
# ssl_mode: disable
# notary_server:
# host: notary_server_db_host
# port: notary_server_db_port
# db_name: notary_server_db_name
# username: notary_server_db_username
# password: notary_server_db_password
# ssl_mode: disable

# Uncomment external_redis if using external Redis server
# external_redis:
# # support redis, redis+sentinel
# # host for redis: <host_redis>:<port_redis>
# # host for redis+sentinel:
# # <host_sentinel1>:<port_sentinel1>,<host_sentinel2>:<port_sentinel2>,<host_sentinel3>:<port_sentinel3>
# host: redis:6379
# password:
# # sentinel_master_set must be set to support redis+sentinel
# #sentinel_master_set:
# # db_index 0 is for core, it's unchangeable
# registry_db_index: 1
# jobservice_db_index: 2
# chartmuseum_db_index: 3
# trivy_db_index: 5
# idle_timeout_seconds: 30

# Uncomment uaa for trusting the certificate of uaa instance that is hosted via self-signed cert.
# uaa:
# ca_file: /path/to/ca

# Global proxy
# Config http proxy for components, e.g. http://my.proxy.com:3128
# Components doesn't need to connect to each others via http proxy.
# Remove component from `components` array if want disable proxy
# for it. If you want use proxy for replication, MUST enable proxy
# for core and jobservice, and set `http_proxy` and `https_proxy`.
# Add domain to the `no_proxy` field, when you want disable proxy
# for some special registry.
proxy:
http_proxy:
https_proxy:
no_proxy:
components:
- core
- jobservice
- trivy

# metric:
# enabled: false
# port: 9090
# path: /metrics

执行安装

　　若要启用https则需要配置证书，过程如下

　　　　配置https自签证书：https://goharbor.io/docs/2.0.0/install-config/configure-https/

　　

　　[root@srv-252 harbor]# ./install.sh 

　　[Step 0]: checking if docker is installed ...

　　Note: docker version: 20.10.7

　　[Step 1]: checking docker-compose is installed ...

　　Note: docker-compose version: 1.27.4

　　[Step 2]: loading Harbor images ...

······················
[Step 5]: starting Harbor ...
Creating network "harbor_harbor" with the default driver
Creating harbor-log ... done
Creating harbor-db ... done
Creating harbor-portal ... done
Creating registry ... done
Creating redis ... done
Creating registryctl ... done
Creating harbor-core ... done
Creating harbor-jobservice ... done
Creating nginx ... done

✔ ----Harbor has been installed and started successfully.----

　　访问：

　　http://ip:8060/