obd2lily

AUTEL IM508 READ IMMO DATA FOR VW GOLF 6 ON BENCH

Used Autel MaxiIM IM508 to read IMMO data from ECU for VW Golf 6 on Bench.

The whole process is simple and quick in 2 minutes.

Plug the wires into the ECU shown as below.

Autel-IM508-Read-IMMO-data-for-VW-Golf-6-on-Bench-1

Connect Autel IM508 to a computer, and make sure the network connection is enabled.

select VW and then “Expert Mode”.

Autel-IM508-Read-IMMO-data-for-VW-Golf-6-on-Bench-2

Checking network connection..

Autel-IM508-Read-IMMO-data-for-VW-Golf-6-on-Bench-3

Select “Engine”.

Autel-IM508-Read-IMMO-data-for-VW-Golf-6-on-Bench-4

Auto detect.

Autel-IM508-Read-IMMO-data-for-VW-Golf-6-on-Bench-5

Establishing vehicle communication.

Current engine type is : MED17 Direct, tap “Ok” to read IMMO data.

Autel-IM508-Read-IMMO-data-for-VW-Golf-6-on-Bench-6

Reading IMMO data, please wait a few seconds.

Autel-IM508-Read-IMMO-data-for-VW-Golf-6-on-Bench-7

Calculating IMMO data, please wait a few seconds.

Autel-IM508-Read-IMMO-data-for-VW-Golf-6-on-Bench-8

Have the vehicle IMMO information finally including VIN, PIN, CS code etc.

Autel-IM508-Read-IMMO-data-for-VW-Golf-6-on-Bench-9

Tap “Ok”, job is done.

posted on 2021-03-12 14:44  obd2lily  阅读(93)  评论(0编辑  收藏  举报

导航