obd2lily

OBDSTAR X300M For Jetta A4 Mileage Programming

 

OBDSTAR X300M mileage programmer is able to work on VW Jetta vehicles via OBD , refer to the module support list below:

Jetta

JC 2013

Read-write mileage

Read EEPROM

Write EEPROM

9S12XHZ512

K-Line -09

NEC35XX(2013-2015)

NEC+24C64

2014.06-

OBDSTAR-X300M-For-Jetta-A4-Mileage-Programming-1

How to use OBDSTAR X300M to change Jetta mileage? Let’s take Jetta A4 as an example here

1.Connected x300m to Jetta A4 by OBD Port, Power on the vehicle, and device.
The original mileage:129950

OBDSTAR-X300M-For-Jetta-A4-Mileage-Programming-2

2. Into the X300M’s Menu, Select VEHICLES-> CLUSTER CALIBRATE->VW->Jetta->K-Line -09

OBDSTAR-X300M-For-Jetta-A4-Mileage-Programming-3

Communicating…
Reading mileage …
Usually 2-5 minutes

3.Current mileage:129950, OK, It’s correct, press ENT

OBDSTAR-X300M-For-Jetta-A4-Mileage-Programming-4
OBDSTAR-X300M-For-Jetta-A4-Mileage-Programming-5

4.Please input the mileage of the adjustment.

OBDSTAR-X300M-For-Jetta-A4-Mileage-Programming-6

We input 129900 here, then press ENT

OBDSTAR-X300M-For-Jetta-A4-Mileage-Programming-7

Adjusting mileage…
Usually 2-5 minutes

Finish

OBDSTAR-X300M-For-Jetta-A4-Mileage-Programming-8

Checking the dashboard, Mileage has been rewritten to 129889!There is a little deviation

OBDSTAR-X300M-For-Jetta-A4-Mileage-Programming-9

 

posted on 2020-11-03 15:30  obd2lily  阅读(125)  评论(0编辑  收藏  举报

导航