基于python的mqtt订阅推送例子

前提：mqtt消息服务器

一、pip install paho-mqtt

二、写一个推送客户端  Publish.py  

 1 # __author: gy-chen
 2 # data: 2020/5/23
 3 # -*- coding: UTF-8 -*-
 4 
 5 
 6 import paho.mqtt.client as mqtt
 7 
 8 
 9 def on_connect(client, userdata, flags, rc):
10     print("Connected with result code: " + str(rc))
11 
12 
13 def on_message(client, userdata, msg):
14     print(msg.topic + " " + str(msg.payload))
15 
16 
17 client = mqtt.Client()
18 client.on_connect = on_connect
19 client.on_message = on_message
20 client.connect('ip', 1883, 600)   # ip为消息服务器的ip地址
21 # 600为keepalive的时间间隔
22 while True:
23     msg = input("请输入推送消息：")
24     client.publish('topic', payload=msg, qos=0)

 

三、写一个订阅客户端 Subscribe.py 

 1 # __author: gy-chen
 2 # data: 2020/5/23
 3 # -*- coding: UTF-8 -*-
 4 
 5 import paho.mqtt.client as mqtt
 6 
 7 
 8 def on_connect(client, userdata, flags, rc):
 9     print("Connected with result code: " + str(rc))
10 
11 
12 def on_message(client, userdata, msg):
13     topic = msg.topic
14     message = str(msg.payload, encoding="utf-8")
15     print(topic + "：" + message)
16 
17 
18 client = mqtt.Client()
19 client.on_connect = on_connect
20 client.on_message = on_message
21 # client.on_disconnect = on_disconnect
22 client.connect('ip', 1883, 600)  # 600为keepalive的时间间隔
23 client.subscribe('topic', qos=0)
24 client.loop_forever()  # 保持连接

 

 例子：

# __author: gy-chen
# data: 2020/5/23
# -*- coding: UTF-8 -*-

import paho.mqtt.client as mqtt
import json
import time

HOST = "ip"   # 消息服务器的ip地址
PORT = 1883
client_id = "1083421xxxxx"                       # 没有就不写，此处部分内容用xxx代替原内容，下同


def on_connect(client, userdata, flags, rc):
    print("Connected with result code "+str(rc))
    client.subscribe("data/receive")         # 订阅消息


def on_message(client, userdata, msg):
    print("主题:"+msg.topic+" 消息:"+str(msg.payload.decode('utf-8')))


def on_subscribe(client, userdata, mid, granted_qos):
    print("On Subscribed: qos = %d" % granted_qos)


def on_disconnect(client, userdata, rc):
    if rc != 0:
        print("Unexpected disconnection %s" % rc)


data = {
    "type": 2,
    "timestamp": time.time(),
    "messageId": "9fcda359-89f5-4933-xxxx",
    "command": "xx/recommend",
    "data": {
        "openId": "xxxx",
        "appId": 1,
        "recommendType": "temRecommend"
    }
}
param = json.dumps(data)
client = mqtt.Client(client_id)
client.username_pw_set("xxxxxx", "xxxxxx")
client.on_connect = on_connect
client.on_message = on_message
client.on_subscribe = on_subscribe
client.on_disconnect = on_disconnect
client.connect(HOST, PORT, 60)
client.publish("data/send", payload=param, qos=0)     # 发送消息
client.loop_forever()

 

 

posted @ 2020-05-23 13:53  nuister  阅读(894)  评论(3)  编辑  收藏  举报