USRP Daugherboard: BasicTX
USRP Daugherboard: BasicTX¶
Specifications
RX: N/A
TX: 1MHz - 250MHz
The BasicTX and BasicRX are designed for use with external RF frontends as an intermediate frequency (IF) interface. The ADC inputs and DAC outputs are directly transformer-coupled to SMA connectors (50Ω impedance) with no mixers, filters, or amplifiers.
The BasicTX and BasicRX give direct access to all of the signals on the daughterboard interface (including 16 bits of high-speed digital I/O, SPI and I2C buses, and the low-speed ADCs and DACs), and as such are useful for developing your own daughterboards or custom FPGA designs.
NOTE: It is possible for the BasicTX board to go down to 100kHz, but YMMV.