【转】ubuntu下自动挂载硬盘分区

1, 首先摸清我系统的硬盘分区等使用情况
sudo fdisk -l
Disk /dev/sda: 128.0 GB, 128035676160 bytes
255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00097397

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048   233476095   116737024   83  Linux
/dev/sda2       233478142   250068991     8295425    5  Extended
/dev/sda5       233478144   250068991     8295424   82  Linux swap / Solaris

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x621867fe

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          63    92164904    46082421    7  HPFS/NTFS/exFAT
Partition 1 does not start on physical sector boundary.
/dev/sdb2        92166144   840998911   374416384   83  Linux
/dev/sdb3       841003008   976773167    67885080    7  HPFS/NTFS/exFAT

sudo blkid
/dev/sda1: UUID="d89cb536-6aee-4f32-90de-7f1d50c56028" TYPE="ext4"
/dev/sda5: UUID="23776989-f354-4ffc-9d3b-c299afe9c6dd" TYPE="swap"
/dev/sdb1: UUID="D6B6542EB65410FB" TYPE="ntfs"
/dev/sdb2: LABEL="woks" UUID="6e29fd49-6443-4048-bc4d-d9a391bf2ce9" TYPE="ext4"
/dev/sdb3: LABEL="winapp" UUID="1ADE5534DE550981" TYPE="ntfs"

我需要挂在的是sdb2和sdb3这两个分区

2,修改分区挂在配置表
打开/etc/fstab

配置文件包含以下几项：

<file system> <mount point>   <type>  <options>       <dump>  <pass>

<file system> ：分区定位，可以给磁盘号，UUID或LABEL，例如：/dev/sda2，UUID=6E9ADAC29ADA85CD或LABEL=software

<mount point> : 具体挂载点的位置，例如：/media/C

<type> : 挂载磁盘类型，linux分区一般为ext4，windows分区一般为ntfs

<options> : 挂载参数，一般为defaults

<dump> : 磁盘备份，默认为0，不备份

<pass> : 磁盘检查，默认为0，不检查

根据情况，我们做如下修改
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=d89cb536-6aee-4f32-90de-7f1d50c56028 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=23776989-f354-4ffc-9d3b-c299afe9c6dd none            swap    sw              0       0

#work was on /dev/sdb2
UUID=6e29fd49-6443-4048-bc4d-d9a391bf2ce9 /media/zangcf/works     ext4    errors=remount-ro 0       0
#winapp was on /dev/sdb3
UUID=1ADE5534DE550981 /media/zangcf/winapp               ntfs    errors=remount-ro 0       0

3, 检查并挂载新添项
手动卸载已经挂载的硬盘，然后
cd /media/zangcf
sudo mkdir winapp
sudo mkdir works
sudo mount -a
mount -a会/etc/fstab中的项全部挂载，如果有错，则会提示错误，然后根据错误找出原因修改。