storm在linux系统下安装调试

安装：

安装 zookeeper ：

  • 下载 zookeeper ：http://zookeeper.apache.org/releases.html#download。
  • 将 zookeeper-3.4.7.tar.gz 解压到目录，/usr/local/zookeeper-3.4.7。
  • 拷贝zookeeper的conf/zoo_sample.cfg并重命名为zoo.cfg，内容修改如下：
    # The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial 
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between 
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just 
# example sakes.
dataDir=/usr/local/zookeeper-3.4.7/data
# the port at which the clients will connect
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the 
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1

# log dir
dataLogDir=/usr/local/zookeeper-3.4.7/log
  • 建立zookeeper集群的myid文件 
    cd /usr/local/zookeeper-3.4.7/data
echo 1 > myid
  • 启动zookeeper
    cd /usr/local/zookeeper-3.4.7/bin
./zkServer.sh start

安装 storm ：

  • 配置nimbus
    修改storm的/usr/local/storm-0.10.0/conf/storm.yaml文件如下：
########### These MUST be filled in for a storm configuration
storm.zookeeper.servers:
     - "192.168.1.63" 
#     - "server2" 
# 
nimbus.host: "192.168.1.63" 
# 
# 
# ##### These may optionally be filled in:
#    
## List of custom serializations
# topology.kryo.register:
#     - org.mycompany.MyType
#     - org.mycompany.MyType2: org.mycompany.MyType2Serializer
#
## List of custom kryo decorators
# topology.kryo.decorators:
#     - org.mycompany.MyDecorator
#
## Locations of the drpc servers
# drpc.servers:
#     - "server1" 
#     - "server2" 

## Metrics Consumers
# topology.metrics.consumer.register:
#   - class: "backtype.storm.metric.LoggingMetricsConsumer" 
#     parallelism.hint: 1
#   - class: "org.mycompany.MyMetricsConsumer" 
#     parallelism.hint: 1
#     argument:
#       - endpoint: "metrics-collector.mycompany.org"
  • 启动storm
cd /usr/local/storm-0.10.0/
./storm nimbus >/dev/null 2>&1 &
./storm supervisor >/dev/null 2>&1 & 
./storm ui >/dev/null 2>&1 &

发布程序

./storm jar /home/jsecode/topology/storm-starter-0.10.0.jar storm.ykd.test.SegmentTopologyMain /home/jsecode/topology/testdata/gpsdata
  • 日志配置
    修改文件 /usr/local/storm-0.10.0/log4j2/worker.xml
<configuration monitorInterval="60">
<properties>
    <property name="pattern">%d{yyyy-MM-dd HH:mm:ss.SSS} %c{1.} [%p] %msg%n</property>
    <property name="patternNoTime">%msg%n</property>
</properties>
<appenders>

    <RollingFile name="SegmentLog" 
                 fileName="${sys:storm.log.dir}/gpsSegmentw.log" 
                 filePattern="${sys:storm.log.dir}/gpsSegmentw.%i.log">
        <PatternLayout>
            <pattern>${pattern}</pattern>
        </PatternLayout>
        <Policies>
            <SizeBasedTriggeringPolicy size="100 MB"/> <!-- Or every 100 MB -->
        </Policies>
        <DefaultRolloverStrategy max="9"/>
    </RollingFile>

    <RollingFile name="RsLog" 
                 fileName="${sys:storm.log.dir}/rs.log" 
                 filePattern="${sys:storm.log.dir}/rs.%i.log">
        <PatternLayout>
            <pattern>${pattern}</pattern>
        </PatternLayout>
        <Policies>
            <SizeBasedTriggeringPolicy size="100 MB"/> <!-- Or every 100 MB -->
        </Policies>
        <DefaultRolloverStrategy max="9"/>
    </RollingFile>

    <RollingFile name="A1" 
                 fileName="${sys:storm.log.dir}/${sys:logfile.name}" 
                 filePattern="${sys:storm.log.dir}/${sys:logfile.name}.%i.gz">
        <PatternLayout>
            <pattern>${pattern}</pattern>
        </PatternLayout>
        <Policies>
            <SizeBasedTriggeringPolicy size="100 MB"/> <!-- Or every 100 MB -->
        </Policies>
        <DefaultRolloverStrategy max="9"/>
    </RollingFile>
    <RollingFile name="STDOUT" 
                 fileName="${sys:storm.log.dir}/${sys:logfile.name}.out" 
                 filePattern="${sys:storm.log.dir}/${sys:logfile.name}.out.%i.gz">
        <PatternLayout>
            <pattern>${patternNoTime}</pattern>
        </PatternLayout>
        <Policies>
            <SizeBasedTriggeringPolicy size="100 MB"/> <!-- Or every 100 MB -->
        </Policies>
        <DefaultRolloverStrategy max="4"/>
    </RollingFile>
    <RollingFile name="STDERR" 
                 fileName="${sys:storm.log.dir}/${sys:logfile.name}.err" 
                 filePattern="${sys:storm.log.dir}/${sys:logfile.name}.err.%i.gz">
        <PatternLayout>
            <pattern>${patternNoTime}</pattern>
        </PatternLayout>
        <Policies>
            <SizeBasedTriggeringPolicy size="100 MB"/> <!-- Or every 100 MB -->
        </Policies>
        <DefaultRolloverStrategy max="4"/>
    </RollingFile>
    <Syslog name="syslog" format="RFC5424" host="localhost" port="514" 
        protocol="UDP" appName="[${sys:storm.id}:${sys:worker.port}]" mdcId="mdc" includeMDC="true" 
        facility="LOCAL5" enterpriseNumber="18060" newLine="true" exceptionPattern="%rEx{full}" 
        messageId="[${sys:user.name}:${sys:logging.sensitivity}]" id="storm"/>
</appenders>
<loggers>

    <Logger name="storm.ykd.test.bolt.SavePosdataTrackSegmentBolt" level="debug">
        <AppenderRef ref="RsLog"/>
    </Logger>

    <Logger name="storm.ykd.test" level="debug">
        <AppenderRef ref="SegmentLog"/>
    </Logger>

    <root level="info"> <!-- We log everything -->
        <appender-ref ref="A1"/>
        <appender-ref ref="syslog"/>
    </root>
    <Logger name="STDERR" level="INFO">
        <appender-ref ref="STDERR"/>
        <appender-ref ref="syslog"/>
    </Logger>
    <Logger name="STDOUT" level="INFO">
        <appender-ref ref="STDOUT"/>
        <appender-ref ref="syslog"/>
    </Logger>
</loggers>
</configuration>
posted @ 2016-10-08 17:34  三驾马车  阅读(370)  评论(0)  编辑  收藏  举报