centos7使用Minikube“快速搭建“出Kubernetes本地实验环境(踩坑集锦及解决方案)
先决条件(先假设你做完这两步骤)
- 检查Linux是否支持虚拟化,验证输出是否为非空如何开启虚拟化
grep -E --color 'vmx|svm' /proc/cpuinfo
- 安装 kubectl
判断是否成功安装kubectl
kubectl version
安装Minikube
Linux
curl -Lo minikube https://kubernetes.oss-cn-hangzhou.aliyuncs.com/minikube/releases/v1.13.0/minikube-linux-amd64 && chmod +x minikube && sudo mv minikube /usr/local/bin/
启动
minikube start
当你执行minkube start会出现这个错误,大概意思是需要加个 --driver=none的参数
错误一:
-
* The "docker" driver should not be used with root privileges. * If you are running minikube within a VM, consider using --driver=none: * https://minikube.sigs.k8s.io/docs/reference/drivers/none/ X Exiting due to DRV_AS_ROOT: The "docker" driver should not be used with root privileges.
加了参数以后那就恐怖了
[WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
1.[WARNING Swap]: running with swap on is not supported. Please disable swap
2.[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
71489 configset.go:348] WARNING: kubeadm cannot validate component configs for API groups [kubelet.config.k8s.io kubeproxy.config.k8s.io]
error execution phase preflight: [preflight] Some fatal errors occurred:
[ERROR FileContent--proc-sys-net-bridge-bridge-nf-call-iptables]: /proc/sys/net/bridge/bridge-nf-call-iptables contents are not set to 1
[preflight] If you know what you are doing, you can make a check non-fatal with `--ignore-preflight-errors=...`
警告1.关闭Swap缓冲区(running with swap on is not supported. Please disable swap)
# 关闭Swap，机器重启后不生效
swapoff -a
# 修改/etc/fstab永久关闭Swap
cp -p /etc/fstab /etc/fstab.bak$(date '+%Y%m%d%H%M%S')
# Redhat
sed -i "s/\/dev\/mapper\/rhel-swap/\#\/dev\/mapper\/rhel-swap/g" /etc/fstab
# CentOS
sed -i "s/\/dev\/mapper\/centos-swap/\#\/dev\/mapper\/centos-swap/g" /etc/fstab
# 修改后重新挂载全部挂载点
mount -a
# 查看Swap
free -m
cat /proc/swaps
systemctl daemon-reload
systemctl restart kubelet
警告2.kubelet service is not enabled, please run 'systemctl enable kubelet.service'
//启动kubelet服务
systemctl enable kubelet.service
错误3. FileContent--proc-sys-net-bridge-bridge-nf-call-iptables]: /proc/sys/net/bridge/bridge-nf-call-iptables contents are not set to 1
echo "1" >/proc/sys/net/bridge/bridge-nf-call-iptables
现在终于没啥错了
启动minikube
为了访问海外的资源，阿里云提供了一系列基础设施，请按照如下参数进行配置。其中常见参数
--driver=***从1.5.0版本开始，Minikube缺省使用本地最好的驱动来创建Kubernetes本地环境，测试过的版本docker,kvm--image-mirror-country cn将缺省利用 registry.cn-hangzhou.aliyuncs.com/google_containers 作为安装Kubernetes的容器镜像仓库 （阿里云版本可选）--iso-url=***利用阿里云的镜像地址下载相应的 .iso 文件 （阿里云版本可选）--registry-mirror=***为了拉取Docker Hub镜像，需要为 Docker daemon 配置镜像加速，参考阿里云镜像服务--cpus=2: 为minikube虚拟机分配CPU核数--memory=2048mb: 为minikube虚拟机分配内存数--kubernetes-version=***: minikube 虚拟机将使用的 kubernetes 版本
minikube start --image-mirror-country cn --iso-url=https://kubernetes.oss-cn-hangzhou.aliyuncs.com/minikube/iso/minikube-v1.5.0.iso --registry-mirror=https://pe3ox7bd.mirror.aliyuncs.com --driver="none" --memory=2048
不出意外应该是这样的
启动minikube dashboard
minikube dashboard
dashboard 给出了一个访问地址，可以看出这个地址和端口只是k8s的虚拟地址，只能本机访问如果要想从电脑上访问服务器上虚拟机上的dashboard 你应该
添加集群对外访问代理：
nohub kubectl proxy --port=[需要暴露的端口号] --address='[服务器IP]' --accept-hosts='^[外部访问服务器的IP]$' >/dev/null 2>&1&
例如：
nohup kubectl proxy --port=41111 --address='192.168.56.165' --accept-hosts='^192.168.56.165$' >/dev/null 2>&1&
访问地址为:
http://192.168.56.165:41111/api/v1/namespaces/kubernetes-dashboard/services/http:kubernetes-dashboard:/proxy/#/overview?namespace=default
