macOS stm32 开发环境搭建

安装st-link 

出自 http://macappstore.org/stlink/
About the App

Install the App

  1. Press Command+Space and type Terminal and press enter/return key.
  2. Run in Terminal app:
    ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" < /dev/null 2> /dev/null
    and press enter/return key. 
    If the screen prompts you to enter a password, please enter your Mac's user password to continue. When you type the password, it won't be displayed on screen, but the system would accept it. So just type your password and press ENTER/RETURN key. Then wait for the command to finish.
  3. Run:
    brew install stlink

Done! You can now use stlink.

----------------------------------------

----------------------------------------

也就是说brew可以直接安装 fine！

我的发开环境：

ALIENTEK 阿波罗 STM32F429 开发板

macbook pro ：macos mojave

ST-LINK/V2

---------------------------------------

 
成功
 
安装交叉编译工具链

下载arm-none-eabi-gcc   https://www.veryarm.com/arm-none-eabi-gcc

解压到/usr/local/ 添加环境变量 /usr/local/arm/gcc-arm-none-eabi-5_4-2016q3/bin
 
测试编译工具链-->
 
 
安装vsCode 
https://code.visualstudio.com/
 
安装stm32Cube
https://my.st.com/content/my_st_com/zh/products/embedded-software/mcus-embedded-software/stm32-embedded-software/stm32cube-mcu-packages.html?querycriteria=productId=LN1897
 
　　我的是stmf4的就下载f4的包
 
============================================================
新建工程和配置
posted @ 2018-11-11 22:28  AAAron  阅读(454)  评论(0)  编辑  收藏  举报